973 research outputs found

    Electrodynamics of a Magnet Moving through a Conducting Pipe

    Full text link
    The popular demonstration involving a permanent magnet falling through a conducting pipe is treated as an axially symmetric boundary value problem. Specifically, Maxwell's equations are solved for an axially symmetric magnet moving coaxially inside an infinitely long, conducting cylindrical shell of arbitrary thickness at nonrelativistic speeds. Analytic solutions for the fields are developed and used to derive the resulting drag force acting on the magnet in integral form. This treatment represents a significant improvement over existing models which idealize the problem as a point dipole moving slowly inside a pipe of negligible thickness. It also provides a rigorous study of eddy currents under a broad range of conditions, and can be used for precision magnetic braking applications. The case of a uniformly magnetized cylindrical magnet is considered in detail, and a comprehensive analytical and numerical study of the properties of the drag force is presented for this geometry. Various limiting cases of interest involving the shape and speed of the magnet and the full range of conductivity and magnetic behavior of the pipe material are investigated and corresponding asymptotic formulas are developed.Comment: 20 pages, 3 figures; computer program posted to http://www.csus.edu/indiv/p/partovimh/magpipedrag.nb Submitted to the Canadian Journal of Physic

    Cardiovascular disease and air pollution in Scotland: no association or insufficient data and study design?

    Get PDF
    <p><b>Background:</b> Coronary heart disease and stroke are leading causes of mortality and ill health in Scotland, and clear associations have been found in previous studies between air pollution and cardiovascular disease. This study aimed to use routinely available data to examine whether there is any evidence of an association between short-term exposure to particulate matter (measured as PM10, particles less than 10 micrograms per cubic metre) and hospital admissions due to cardiovascular disease, in the two largest cities in Scotland during the years 2000 to 2006.</p> <p><b>Methods:</b> The study utilised an ecological time series design, and the analysis was based on overdispersed Poisson log-linear models.</p> <p><b>Results:</b> No consistent associations were found between PM10 concentrations and cardiovascular hospital admissions in either of the cities studied, as all of the estimated relative risks were close to one, and all but one of the associated 95% confidence intervals contained the null risk of one.</p> <p><b>Conclusions:</b> This study suggests that in small cities, where air quality is relatively good, then either PM10 concentrations have no effect on cardiovascular ill health, or that the routinely available data and the corresponding study design are not sufficient to detect an association.</p&gt

    Extensions of tempered representations

    Get PDF
    Let π,π′\pi, \pi' be irreducible tempered representations of an affine Hecke algebra H with positive parameters. We compute the higher extension groups ExtHn(π,π′)Ext_H^n (\pi,\pi') explicitly in terms of the representations of analytic R-groups corresponding to π\pi and π′\pi'. The result has immediate applications to the computation of the Euler-Poincar\'e pairing EP(π,π′)EP(\pi,\pi'), the alternating sum of the dimensions of the Ext-groups. The resulting formula for EP(π,π′)EP(\pi,\pi') is equal to Arthur's formula for the elliptic pairing of tempered characters in the setting of reductive p-adic groups. Our proof applies equally well to affine Hecke algebras and to reductive groups over non-archimedean local fields of arbitrary characteristic. This sheds new light on the formula of Arthur and gives a new proof of Kazhdan's orthogonality conjecture for the Euler-Poincar\'e pairing of admissible characters.Comment: This paper grew out of "A formula of Arthur and affine Hecke algebras" (arXiv:1011.0679). In the second version some minor points were improve

    Effective ecosystem monitoring requires a multi-scaled approach

    Get PDF
    Ecosystem monitoring is fundamental to our understanding of how ecosystem change is impacting our natural resources and is vital for developing evidence-based policy and management. However, the different types of ecosystem monitoring, along with their recommended applications, are often poorly understood and contentious. Varying definitions and strict adherence to a specific monitoring type can inhibit effective ecosystem monitoring, leading to poor program development, implementation and outcomes. In an effort to develop a more consistent and clear understanding of ecosystem monitoring programs, we here review the main types of monitoring and recommend the widespread adoption of three classifications of monitoring, namely, targeted, surveillance and landscape monitoring. Landscape monitoring is conducted over large areas, provides spatial data, and enables questions relating to where and when ecosystem change is occurring to be addressed. Surveillance monitoring uses standardised field methods to inform on what is changing in our environments and the direction and magnitude of that change, whilst targeted monitoring is designed around testable hypotheses over defined areas and is the best approach for determining the causes of ecosystem change. The classification system is flexible and can incorporate different interests, objectives, targets and characteristics as well as different spatial scales and temporal frequencies, while also providing valuable structure and consistency across distinct ecosystem monitoring programs. To support our argument, we examine the ability of each monitoring type to inform on six key types of questions that are routinely posed for ecosystem monitoring programs, such as where and when change is occurring, what is the magnitude of change, and how can the change be managed? As we demonstrate, each type of ecosystem monitoring has its own strengths and weaknesses, which should be carefully considered relative to the desired results. Using this scheme, scientists and land managers can design programs best suited to their needs. Finally, we assert that for our most serious environmental challenges, it is essential that we include information from each of these monitoring scales to inform on all facets of ecosystem change, and this is best achieved through close collaboration between the scales. With a renewed understanding of the importance of each monitoring type, along with greater commitment to monitor cooperatively, we will be well placed to address some of our greatest environmental challenges

    The Magnetic Field of the Solar Corona from Pulsar Observations

    Full text link
    We present a novel experiment with the capacity to independently measure both the electron density and the magnetic field of the solar corona. We achieve this through measurement of the excess Faraday rotation due to propagation of the polarised emission from a number of pulsars through the magnetic field of the solar corona. This method yields independent measures of the integrated electron density, via dispersion of the pulsed signal and the magnetic field, via the amount of Faraday rotation. In principle this allows the determination of the integrated magnetic field through the solar corona along many lines of sight without any assumptions regarding the electron density distribution. We present a detection of an increase in the rotation measure of the pulsar J1801−-2304 of approximately 160 \rad at an elongation of 0.95∘^\circ from the centre of the solar disk. This corresponds to a lower limit of the magnetic field strength along this line of sight of >393μG> 393\mu\mathrm{G}. The lack of precision in the integrated electron density measurement restricts this result to a limit, but application of coronal plasma models can further constrain this to approximately 20mG, along a path passing 2.5 solar radii from the solar limb. Which is consistent with predictions obtained using extensions to the Source Surface models published by Wilcox Solar ObservatoryComment: 16 pages, 4 figures (1 colour): Submitted to Solar Physic

    Chiral phase boundary of QCD at finite temperature

    Full text link
    We analyze the approach to chiral symmetry breaking in QCD at finite temperature, using the functional renormalization group. We compute the running gauge coupling in QCD for all temperatures and scales within a simple truncated renormalization flow. At finite temperature, the coupling is governed by a fixed point of the 3-dimensional theory for scales smaller than the corresponding temperature. Chiral symmetry breaking is approached if the running coupling drives the quark sector to criticality. We quantitatively determine the phase boundary in the plane of temperature and number of flavors and find good agreement with lattice results. As a generic and testable prediction, we observe that our underlying IR fixed-point scenario leaves its imprint in the shape of the phase boundary near the critical flavor number: here, the scaling of the critical temperature is determined by the zero-temperature IR critical exponent of the running coupling.Comment: 39 pages, 8 figure

    On the Progenitors of Core-Collapse Supernovae

    Full text link
    Theory holds that a star born with an initial mass between about 8 and 140 times the mass of the Sun will end its life through the catastrophic gravitational collapse of its iron core to a neutron star or black hole. This core collapse process is thought to usually be accompanied by the ejection of the star's envelope as a supernova. This established theory is now being tested observationally, with over three dozen core-collapse supernovae having had the properties of their progenitor stars directly measured through the examination of high-resolution images taken prior to the explosion. Here I review what has been learned from these studies and briefly examine the potential impact on stellar evolution theory, the existence of "failed supernovae", and our understanding of the core-collapse explosion mechanism.Comment: 7 Pages, invited review accepted for publication by Astrophysics and Space Science (special HEDLA 2010 issue

    Generic Business Model Types for Enterprise Mashup Intermediaries

    Get PDF
    The huge demand for situational and ad-hoc applications desired by the mass of business end users led to a new kind of Web applications, well-known as Enterprise Mashups. Users with no or limited programming skills are empowered to leverage in a collaborative manner existing Mashup components by combining and reusing company internal and external resources within minutes to new value added applications. Thereby, Enterprise Mashup environments interact as intermediaries to match the supply of providers and demand of consumers. By following the design science approach, we propose an interaction phase model artefact based on market transaction phases to structure required intermediary features. By means of five case studies, we demonstrate the application of the designed model and identify three generic business model types for Enterprise Mashups intermediaries (directory, broker, and marketplace). So far, intermediaries following a real marketplace business model don’t exist in context of Enterprise Mashups and require further research for this emerging paradigm

    New fossil remains of Homo naledi from the Lesedi Chamber, South Africa

    Get PDF
    The Rising Star cave system has produced abundant fossil hominin remains within the Dinaledi Chamber, representing a minimum of 15 individuals attributed to Homo naledi. Further exploration led to the discovery of hominin material, now comprising 131 hominin specimens, within a second chamber, the Lesedi Chamber. The Lesedi Chamber is far separated from the Dinaledi Chamber within the Rising Star cave system, and represents a second depositional context for hominin remains. In each of three collection areas within the Lesedi Chamber, diagnostic skeletal material allows a clear attribution to H. naledi. Both adult and immature material is present. The hominin remains represent at least three individuals based upon duplication of elements, but more individuals are likely present based upon the spatial context. The most significant specimen is the near-complete cranium of a large individual, designated LES1, with an endocranial volume of approximately 610 ml and associated postcranial remains. The Lesedi Chamber skeletal sample extends our knowledge of the morphology and variation of H. naledi, and evidence of H. naledi from both recovery localities shows a consistent pattern of differentiation from other hominin species.SP201
    • …
    corecore