Vibration-Induced Conductivity Fluctuation (VICOF) Testing of Soils

In this Letter, we propose and experimentally demonstrate a simple method to provide additional in-formation by conductivity measurements of soils. The AC electrical conductance of the soil is measured while it is exposed to a periodic vibration. The vibration-induced density fluctuation implies a corresponding conductivity fluctuation that can be seen as combination frequency components, the sum and the difference of the mean AC frequency and the double of vibration frequency, in the current response. The method is demonstrated by measurements on clayey and sandy soils

Unpowered Aerodynamic Characteristics of a 15-Percent Scale Model of a Twin-Engine Commuter Aircraft

An experimental investigation was conducted in the Ames 12-Foot Pressure Wind Tunnel to determine the unpowered aerodynamic characteristics of a 15-percent-scale model of a twin-engine commuter aircraft. Model longitudinal aerodynamic characteristics were examined at discrete flap deflections for various angle-of-attack and wind-tunnel-velocity ranges with the empennage on and off. Data are presented for the basic model configuration consisting of the fuselage, wing, basic wing leading edge, double slotted flaps, midengine nacelles, and empennage. Other configurations tested include a particle-span drooped leading edge (dropped outboard of the engine nacelles), a full-span drooped leading edge, low- and high-mounted engine nacelles, and a single-slotted flap. An evaluation was made of the model mounting system by comparing data obtained with the model mounted conventionally on the wind-tunnel model-support struts and the model inverted

Laser power conversion system analysis, volume 2

The orbit-to-ground laser power conversion system analysis investigated the feasibility and cost effectiveness of converting solar energy into laser energy in space, and transmitting the laser energy to earth for conversion to electrical energy. The analysis included space laser systems with electrical outputs on the ground ranging from 100 to 10,000 MW. The space laser power system was shown to be feasible and a viable alternate to the microwave solar power satellite. The narrow laser beam provides many options and alternatives not attainable with a microwave beam

Laser power conversion system analysis, volume 1

The orbit-to-orbit laser energy conversion system analysis established a mission model of satellites with various orbital parameters and average electrical power requirements ranging from 1 to 300 kW. The system analysis evaluated various conversion techniques, power system deployment parameters, power system electrical supplies and other critical supplies and other critical subsystems relative to various combinations of the mission model. The analysis show that the laser power system would not be competitive with current satellite power systems from weight, cost and development risk standpoints

‘We kind of try to merge our own experience with the objectivity of the criteria’: The role of connoisseurship and tacit practice in undergraduate fine art assessment

This article explores connoisseurship in the context of fine art undergraduate assessment practice. I interviewed twelve fine art lecturers in order to explore and unpack the concept of connoisseurship in relation to subjectivity, objectivity and tacit practice. Building on the work of Bourdieu (1973, 1977, 1986) and Shay (2003, 2005), both of whom problematize the view that subjectivity and objectivity are binary opposites, my research illustrates the ways that connoisseurship is underpinned by informed professional judgements located in communities of practice. Within this particular conception of connoisseurship, the lecturers’ expertise is co-constituted in communities of assessors through participation and engagement. Standards reside in communities of practice

On the structure of the scalar mesons f0(975)f_0(975) and a0(980)a_0(980)

We investigate the structure of the scalar mesons $f_0(975)$ and $a_0(980)$ within realistic meson-exchange models of the $\pi\pi$ and $\pi\eta$ interactions. Starting from a modified version of the J\"ulich model for $\pi\pi$ scattering we perform an analysis of the pole structure of the resulting scattering amplitude and find, in contrast to existing models, a somewhat large mass for the $f_0(975)$ ($m_{f_0}=1015$ MeV, $\Gamma_{f_0}=30$ MeV). It is shown that our model provides a description of $J/\psi\rightarrow\phi\pi\pi/\phi KK$ data comparable in quality with those of alternative models. Furthermore, the formalism developed for the $\pi\pi$ system is consistently extended to the $\pi\eta$ interaction leading to a description of the $a_0(980)$ as a dynamically generated threshold effect (which is therefore neither a conventional $q\overline{q}$ state nor a $K\overline{K}$ bound state). Exploring the corresponding pole position the $a_0(980)$ is found to be rather broad ($m_{a_0}=991$ MeV, $\Gamma_{a_0}=202$ MeV). The experimentally observed smaller width results from the influence of the nearby $K\overline{K}$ threshold on this pole.Comment: 25 pages, 15 Postscript figure

Orbit transfer rocket engine integrated control and health monitoring system technology readiness assessment

The objectives of this task were to: (1) estimate the technology readiness of an integrated control and health monitoring (ICHM) system for the Aerojet 7500 lbF Orbit Transfer Vehicle engine preliminary design assuming space based operations; and (2) estimate the remaining cost to advance this technology to a NASA defined 'readiness level 6' by 1996 wherein the technology has been demonstrated with a system validation model in a simulated environment. The work was accomplished through the conduct of four subtasks. In subtask 1 the minimally required functions for the control and monitoring system was specified. The elements required to perform these functions were specified in Subtask 2. In Subtask 3, the technology readiness level of each element was assessed. Finally, in Subtask 4, the development cost and schedule requirements were estimated for bringing each element to 'readiness level 6'

Knowledge, Food and Place: a way of producing a way of knowing

The article examines the dynamics of knowledge in the valorisation of local food, drawing on the results from the CORASON project (A cognitive approach to rural sustainable development: the dynamics of expert and lay knowledge), funded by the EU under its Framework Programme 6. It is based on the analysis of several in-depth case studies on food relocalisation carried out in 10 European countries

The role of shell crossing on the existence and stability of trapped matter shells in spherical inhomogeneous \Lambda-CDM models

We analyse the dynamics of trapped matter shells in spherically symmetric inhomogeneous \Lambda-CDM models. The investigation uses a Generalised Lema\^itre-Tolman-Bondi description with initial conditions subject to the constraints of having spatially asymptotic cosmological expansion, initial Hubble-type flow and a regular initial density distribution. We discuss the effects of shell crossing and use a qualitative description of the local trapped matter shells to explore global properties of the models. Once shell crossing occurs, we find a splitting of the global shells separating expansion from collapse into, at most, two global shells: an inner and an outer limit trapped matter shell. In the case of expanding models, the outer limit trapped matter shell necessarily exists. We also study the role of shear in this process, compare our analysis with the Newtonian framework and give concrete examples using density profile models of structure formation in cosmology.Comment: 17pp 12fig