13,935 research outputs found
Bondability of RTV silicon rubber
Glow discharge method for producing a bondable Room Temperature Vulcanizing (RTV) silicone is described. Mechanical and chemical properties of silicone specimens are described. Theory concerning the relationship between surface characteristics and bondability is examined with respect to the polymer specimen
Experimental creep data for a built-up aluminum/titanium structure subjected to heating and loading
Experimental creep, temperature, and strain data resulting from a laboratory experiment on a built-up aluminum/titanium structure are presented. The structure and the experiment are described in detail. A heating and loading experiment lasting approximately six hours is conducted on a test structure. Considerable creep strain resulted from compressive stresses in the heated skin. Large residual stresses were found after the experiment was completed. The residual stresses in the substructure frames were large enough to preclude further cycles of creep experiments with this built-up structure because of concern that the frame webs would buckle
Display system software for the integration of an ADAGE 3000 programmable display generator into the solid modeling package C.A.D. software
A software system that integrates an ADAGE 3000 Programmable Display Generator into a C.A.D. software package known as the Solid Modeling Program is described. The Solid Modeling Program (SMP) is an interactive program that is used to model complex solid object through the composition of primitive geomeentities. In addition, SMP provides extensive facilities for model editing and display. The ADAGE 3000 Programmable Display Generator (PDG) is a color, raster scan, programmable display generator with a 32-bit bit-slice, bipolar microprocessor (BPS). The modularity of the system architecture and the width and speed of the system bus allow for additional co-processors in the system. These co-processors combine to provide efficient operations on and rendering of graphics entities. The resulting software system takes advantage of the graphics capabilities of the PDG in the operation of SMP by distributing its processing modules between the host and the PDG. Initially, the target host computer was a PRIME 850, which was later substituted with a VAX-11/785. Two versions of the software system were developed, a phase 1 and a phase 2. In phase 1, the ADAGE 3000 is used as a frame buffer. In phase II, SMP was functionally partitioned and some of its functions were implemented in the ADAGE 3000 by means of ADAGE's SOLID 3000 software package
NASA participation in the AMST program
The objectives of the NASA Advanced Medium STOL Transport Experiments Program are discussed and several of the NASA experiments currently implemented and conducted on the YC-14 and YC-15 prototype aircraft are described. Emphasis is placed on experiments related to powered lift aerodynamics and acoustics
Long-range correlations and trends in Colombian seismic time series
We study long-range correlations and trends in time series extracted from the
data of seismic events occurred from 1973 to 2011 in a rectangular region that
contains mainly all the continental part of Colombia. The long-range
correlations are detected by the calculation of the Hurst exponents for the
time series of interevent intervals, separation distances, depth differences
and magnitude differences. By using a modification of the classical
method that has been developed to detect short-range correlations in time
series, we find the existence of persistence for all the time series considered
except for magnitude differences. We find also, by using the until the
third order, that the studied time series are not influenced by trends.
Additionally, an analysis of the Hurst exponent as a function of the number of
events in the time and the maximum window size is presented.Comment: 21 pages, 6 figures, 2 figures added, types corrected, accepted to be
published in Physica
Multi-hazard risk assessment using GIS in urban areas: a case study for the city of Turrialba, Costa Rica
In the framework of the UNESCO sponsored project on “Capacity Building for Natural Disaster Reduction” a case study was carried out on multi-hazard risk assessment of the city of Turrialba, located in the central part of Costa Rica. The city with a population of 33,000 people is located in an area, which is regularly affected by flooding, landslides and earthquakes. In order to assist the local emergency commission and the municipality, a pilot study was carried out in the development of a GIS –based system for risk assessment and management. The work was made using an orthophoto as basis, on which all buildings, land parcels and roads, within the city and its direct surroundings were digitized, resulting in a digital parcel map, for which a number of hazard and vulnerability attributes were collected in the field. Based on historical information a GIS database was generated, which was used to generate flood depth maps for different return periods. For determining the seismic hazard a modified version of the Radius approach was used and the landslide hazard was determined based on the historical landslide inventory and a number of factor maps, using a statistical approach. The cadastral database of the city was used, in combination with the various hazard maps for different return periods to generate vulnerability maps for the city. In order to determine cost of the elements at risk, differentiation was made between the costs of the constructions and the costs of the contents of the buildings. The cost maps were combined with the vulnerability maps and the hazard maps per hazard type for the different return periods, in order to obtain graphs of probability versus potential damage. The resulting database can be a tool for local authorities to determine the effect of certain mitigation measures, for which a cost-benefit analysis can be carried out. The database also serves as an important tool in the disaster preparedness phase of disaster management at the municipal level
A fast acting electrical servo for the actuation of full span, Fowler-type wing flaps in DLC applications: A detail design study
The philosophy and detail design of an electro-mechanical actuator for Fowler-type wing flaps which have a response time constant of 0.025 seconds are described. A conventional electrical servomotor with a power rating twice the maximum power delivered to the load is employed along with adaptive, gain-scheduled feedback and various logic circuits, including one to remove electrical excitation from the motor during extended periods when no motion of the flap is desired
- …