VUV-Vis optical characterization of Tetraphenyl-butadiene films on glass and specular reflector substrates from room to liquid Argon temperature

The use of efficient wavelength-shifters from the vacuum-ultraviolet to the photosensor's range of sensitivity is a key feature in detectors for Dark Matter search and neutrino physics based on liquid argon scintillation detection. Thin film of Tetraphenyl-butadiene (TPB) deposited onto the surface delimiting the active volume of the detector and/or onto the photosensor optical window is the most common solution in current and planned experiments. Detector design and response can be evaluated and correctly simulated only when the properties of the optical system in use (TPB film + substrate) are fully understood. Characterization of the optical system requires specific, sometimes sophisticated optical methodologies. In this paper the main features of TPB coatings on different, commonly used substrates is reported, as a result of two independent campaigns of measurements at the specialized optical metrology labs of ENEA and University of Tor Vergata. Measured features include TPB emission spectra with lineshape and relative intensity variation recorded as a function of the film thickness and for the first time down to LAr temperature, as well as optical reflectance and transmittance spectra of the TPB coated substrates in the wavelength range of the TPB emission

Fully-digital low-frequency lock-in amplifier for photoluminescence measurements

Lock-in amplifiers, used in several experimental physics applications, are instruments performing quadrature demodulation, which is useful when signals are affected by much noise. Generally, commercially-available lock-in amplifiers are very accurate, but expensive, especially if their operating range includes radiofrequencies. In many applications, high precision is not necessary for the measurements, but it is preferable to have low-cost, low-weight, compactness and a user-friendly graphical unit interface. In this paper, we describe a new fully-digital low-frequency lock-in amplifier developed at ENEA C.R. Frascati Laboratories for photoluminescence experiments based on an innovative low-cost architecture and processing algorithms. The hardware, firmware and software developed for the whole photoluminescence measurement set-up is presented. The present lock-in was first characterized with synthetic electrical sine wave signals and white noise. A dynamic reserve of 43 dB and a noise figure in the range of 25–44 dB were estimated. These results show compatibility with several measurement applications, such as photoluminescence, and the adequacy of the resolutions with respect to the hardware costs. Finally, preliminary results of photoluminescence measurements are presented

Optical spectroscopy and microscopy of radiationinduced light-emitting point defects in lithium fluoride crystals and films

Broad-band light-emitting radiation-induced F₂ and F₃⁺ electronic point defects, stable and laser-active at room temperature in lithium fluoride crystals and films, find applications in dosimeters, tuneable color-center lasers, broad-band miniaturized light sources and in novel radiation imaging detectors. A brief review of their photoemission properties is presented, and their peculiarities at liquid nitrogen temperature are discussed. A few experimental results about optical spectroscopy and fluorescence microscopy of these radiation-induced point defects in LiF crystals and thin films are presented to obtain information about the coloration curves, the point defects formation efficiency, the effects of the photo-bleaching processes, and so on. The control of local formation, stabilization and transformation of radiation-induced light-emitting defect centers is crucial for the development of optical active micro-components and nanostructures. Some of the advantages of low temperature measurements for novel confocal laser scanning fluorescence microscopy techniques, widely used for the spatial mapping of these point defects thorough the optical reading of their visible photoluminescence, are highlighted

High resolution and high efficiency coloration of lithium fluoride by soft X-rays irradiation

The efficient coloration of LiF material, in the form of bulk and films, by EUV and soft X-rays emitted by a laser-plasma source is demonstrated. The short penetration depth of soft-X-rays is exploited to obtain high spatial resolution luminescent patterns while the high dynamic range of proportionality between X-ray dose and coloration is exploited for using LiF as image detector in micro-radiography and soft X-ray microscopy applications

Contact X-ray microscopy of living cells by using LiF crystal as imaging detector

In this paper, the use of lithium fluoride (LiF) as imaging radiation detector to analyse living cells by single-shot soft X-ray contact microscopy is presented. High resolved X-ray images on LiF of cyanobacterium Leptolyngbya VRUC135, two unicellular microalgae of the genus Chlamydomonas and mouse macrophage cells (line RAW 264.7) have been obtained utilizingX-ray radiation in the water window energy range from a laser plasma source. The used method is based on loading of the samples, the cell suspension, in a special holder where they are in close contactwith a LiF crystal solid-state Xray imaging detector. After exposure and sample removal, the images stored in LiF by the softX-ray contactmicroscopy technique are read by an optical microscope in fluorescence mode. The clear image of the mucilaginous sheath the structure of the filamentous Leptolyngbya and the visible nucleolus in the macrophage cells image, are noteworthiness results. The peculiarities of the used X-ray radiation and of the LiF imaging detector allow obtaining images in absorption contrast revealing the internal structures of the investigated samples at high spatial resolution. Moreover, thewidedynamicrangeof theLiF imaging detector contributes to obtain high-quality images. In particular, we demonstrate that this peculiar characteristic of LiF detector allows enhancing the contrast and reveal details even when they were obscured by a nonuniform stray light

The Top-Implart Proton Linear Accelerator: Interim Characteristics of the 35 Mev Beam

In the framework of the Italian TOP-IMPLART project (Regione Lazio), ENEA-Frascati, ISS and IFO are developing and constructing the first proton linear accelerator based on an actively scanned beam for tumor radiotherapy with final energy of 150 MeV. An important feature of this accelerator is modularity: an exploitable beam can be delivered at any stage of its construction, which allows for immediate characterization and virtually continuous improvement of its performance. Currently, a sequence of 3 GHz accelerating modules combined with a commercial injector operating at 425 MHz delivers protons up to 35 MeV. Several dosimetry systems were used to obtain preliminary characteristics of the 35-MeV beam in terms of stability and homogeneity. Short-term stability and homogeneity better than 3% and 2.6%, respectively, were demonstrated; for stability an improvement with respect to the respective value obtained for the previous 27 MeV beam