Effects of feeding management and breed type on muscle chemical composition and relationships between carcass and muscle compositional traits in steers

peer-reviewedThere is little published information on the chemical composition of muscle from beef steers produced in Irish production systems. The objective of this study was to determine the effects of feeding management and breed type on m. longissimus chemical composition of steers, and to examine relationships between selected carcass traits and measures of carcass and muscle composition. A total of 117 steers (65 Friesians and 52 Charolais Friesians) were assigned on weight within breed type to a pre-experimental slaughter group and to one of 12 finishing groups (6 feeding treatments by 2 finishing periods). The 6 feeding treatments were: (1) silage only offered ad libitum (SO), (2) and (3) SO plus a low concentrate level, (4) and (5) SO plus a high concentrate level, (6) concentrates ad libitum. In Treatments 2 and 4, the silage and concentrates were offered separately whereas in Treatments 3 and 5 they were offered as a total mixed ration (TMR). The two finishing periods were 105 and 175 days. Mean low, high and ad libitum concentrate levels were proportionately 0.415, 0.732 and 0.927, respectively, of daily dry matter intake. Carcass weight, fat depth, fat proportion in the rib joint and m. longissimus lipid concentration all increased (P < 0.01) asymptotically with increasing concentrate level. Carcass fat class (P < 0.07), perinephric plus retroperitoneal fat weight (P < 0.001), fat depth (P < 0.06), fat proportion in the rib joint (P < 0.001) and m. longissimus lipid concentration (P < 0.001) were higher for Friesians than for Charolais crosses. Carcass weight increased (P < 0.001) with increased duration of the finishing period, as did carcass fat class (P < 0.06), fat proportion in the rib joint (P < 0.001) and m. longissimus lipid concentration (P < 0.001). Method of feeding had no effect on any of the traits measured

Comparison of pasture and concentrate finishing of Holstein Friesian, Aberdeen Angus × Holstein Friesian and Belgian Blue × Holstein Friesian steers

peer-reviewedCrossbreeding Holstein Friesian dairy cows with both early and late maturing beef breed bulls is common in Ireland. This study concerned the comparison of spring-born Holstein Friesian (HF), Aberdeen Angus × Holstein Friesian (AA) and Belgian Blue × Holstein Friesian (BB) steers slaughtered directly off pasture in the autumn or following a period of concentrate finishing indoors. Male calves (18 per breed type) were reared together until August of their second year when they were assigned to a 3 (breed type) × 3 (finishing strategy) factorial experiment. The three finishing strategies were (i) pasture only for 94 days to slaughter (PE), (ii) concentrate ad libitum indoors for 94 days to slaughter (CE), and (iii) pasture only for 94 days followed by concentrate ad libitum indoors for 98 days to slaughter (PC). For HF, AA, and BB, mean carcass weight, carcass conformation score and carcass fat score values were 275, 284 and 301 (s.e. 5.1) kg, 1.75, 2.42 and 2.89 (s.e. 0.11), and 2.48, 2.89 and 2.17 (s.e. 0.11), respectively. Pasture alone supported live-weight and carcass-weight gains of approximately 800 g/day and 400 g/day, respectively. Live-weight and carcass-weight gains on concentrate ad libitum were approximately 1400 and 870 g/day, respectively. For PE, CE and PC, mean carcass weight, carcass conformation score and carcass fat score values were 244, 287 and 329 (s.e. 5.1) kg, 1.81, 2.56 and 2.69 (s.e. 0.11), and 1.83, 2.71 and 3.01 (s.e. 0.11), respectively. It is concluded that none of the breed types reached an acceptable carcass weight on PE and only HF had acceptable carcass finish. All breed types were acceptably finished on both concentrate finishing strategies

Analysis of an information-theoretic model for communication

We study the cost-minimization problem posed by Ferrer i Cancho and Sol\'e in their model of communication that aimed at explaining the origin of Zipf's law [PNAS 100, 788 (2003)]. Direct analysis shows that the minimum cost is $\min {\lambda, 1-\lambda}$, where $\lambda$ determines the relative weights of speaker's and hearer's costs in the total, as shown in several previous works using different approaches. The nature and multiplicity of the minimizing solution changes discontinuously at $\lambda=1/2$, being qualitatively different for $\lambda 1/2$, and $\lambda=1/2$. Zipf's law is found only in a vanishing fraction of the minimum-cost solutions at $\lambda = 1/2$ and therefore is not explained by this model. Imposing the further condition of equal costs yields distributions substantially closer to Zipf's law, but significant differences persist. We also investigate the solutions reached by the previously used minimization algorithm and find that they correctly recover global minimum states at the transition.Comment: 19 pages, 4 figures. Important references and new results adde

Optimising The Response To Supplementary Concentrates By Beef Cattle In Winter

End of project reportConcentrates are a major component of feed costs in winter finishing of beef cattle. Two separate experiments were carried out to evaluate the response to increasing supplementary concentrate level with grass silage and the effects of feeding the silage and concentrates separately or as a total mixed ration (TMR). In experiment 1, a total of 117 finishing steers (initial live weight 538 kg, s.d. 35.5) were assigned to a preexperimental slaughter group of 9 animals and to 6 feeding treatments of 18 animals each. The feeding treatments were: 1) silage (SO) only offered ad libitum, 2) SO plus a low level of concentrates offered separately (LS), 3) SO plus a low level of concentrates offered as a TMR (LM), 4) SO plus a medium level of concentrates offered separately (MS), 5) SO plus a medium level of concentrates offered as a TMR (MM), and 6) concentrates ad libitum plus a restricted silage allowance (AL). Low and medium target concentrate levels were 3 and 6 kg dry matter (DM) per head daily. When silage and concentrates were fed separately, the daily concentrate allowance was given in one morning feed. The animals were individually fed for a mean period of 132 days. After slaughter, carcasses were weighed and graded and the ribs joint was dissected into its component tissues. Silage DM intake decreased but total DM intake increased with increasing concentrate level. Live weight gains for SO, LS, LM, MS, MM and AL were 0.34, 0.86, 0.86, 1.02, 1.00 and 1.12 (s.e. 0.064) kg/day, respectively. Corresponding carcass weight gains were 0.25, 0.58, 0.58, 0.71, 0.68 and 0.82 (s.e. 0.028) kg/day. All measures of fatness increased, ribs joint bone proportion decreased, and muscle proportion was not significantly affected by dietary concentrate level. There were no significant interactions between concentrate level and method of feeding. Compared with offering the feeds separately, feeding a TMR increased silage DM intake by proportionately 0.06 and total DM intake by proportionately 0.04. Otherwise, method of feeding had no significant effect on performance, slaughter or carcass traits. Mean rumen pH decreased while ammonia concentration tended to increase with increasing concentrate level. Total volatile fatty acids and the acetate to propionate ratio were lowest for SO. Method of feeding had no significant effect on rumen fermentation

A note on the effect of post-mortem maturation on colour of bovine Longissimus dorsi muscle

peer-reviewedFinancial support to P.G. Dunne was provided under the Walsh Fellowship programme of Teagasc.Fifteen heifers were housed and fed a concentrate diet while 54 counterparts grazed at pasture for 90 days at which stage six heifers from each group were slaughtered. The remaining animals in the pasture group were then housed and offered either: concentrate only; concentrate plus grass silage with silage accounting for either 20% or 50% of the total dry matter offered; or zero-grazed grass plus concentrate with grass accounting for 83% of the dry matter offered. Heifers (3/diet) were slaughtered 28, 56, 91 and 120 days thereafter. Colour characteristics of M. longissimus dorsi (LD) were measured at 48 h post mortem. The LD was then vacuum-packaged and stored at between 0 and 4 °C in darkness for 12 days, when colour characteristics were again measured. Maturation of LD resulted in meat that had higher redness values (‘a’ value; P<0.001) and a more intense red colour (higher ‘C’ value; P<0.001) at 14 days post mortem than at 2 days, regardless of diet/duration of feeding. Maturation also resulted in a brighter colour (higher ‘L’ value; P<0.001) but this difference was greatest when cattle were slaughtered the day-56 time point

Length-weight relationships for some important forage crustaceans from South Africa

The diet of marine animals is usually determined by stomach content analysis. Although partially digested prey fragments can often be identified to species level, it is difficult to estimate the original mass of the prey organism. This information, however, is essential for calculating both the total food intake as well as the relative contribution of each prey item. In this study we present regression equations that can be used to estimate the original mass of 18 common South African crustaceans from various indigestible fragments such as the carapace (length and width), chelae (length and width of left and right dactylus) and eye (length and width)

Facile Synthesis and Versatilities of Polyanthraquinoylamine Nanofibril Bundles with Self Stability and High Carbon Yield

A facile synthesis for nanosized conducting polymers with inherent self-stability and multi-functionalities is a main challenge. Here we simply synthesize intrinsically self-stabilized nanofibril bundles of poly(1-anthraquinoylamine) (PAQ) by a template-free method. The critical polymerization parameters were studied to significantly optimize the synthesis, size, properties, and functionalities of the resulted fine nanofibrils with a diameter of ca. 30 nm and length of ~6 &#x3bc;m. The PAQ obtained with ammonium persulfate possesses higher polymerization yield, purer composition, higher conductivity, better melting behaviour, higher thermostability, lower burning enthalpy, and slower degradation than that with other oxidants. Furthermore, the polymer nanofibrils exhibit high self-stability, powerful redispersibility, high purity, and clean surface because of a complete avoidance of the contamination from external stabilizer. The PAQ exhibits widely controllable conductivity moving across ten orders of magnitudes from 10^-9^ to 50 S/cm, photoluminescence, lead-ion adsorbability, very high thermostability in air and extremely high char yield in nitrogen at 1000&#x2da;C. These materials would be useful as advanced materials including photoluminescent materials, highly cost-effective carbon precursors, sorbents of toxic metal ions, and cost-efficient conductive nanocomposite with low percolation threshold

Mode-locking in vertical external-cavity surface-emitting lasers with type-II quantum-well configurations

A microscopic study of mode-locked pulse generation is presented for vertical external-cavity surface-emitting lasers utilizing type-II quantum well configurations. The coupled Maxwell semiconductor Bloch equations are solved numerically where the type-II carrier replenishment is modeled via suitably chosen reservoirs. Conditions for stable mode-locked pulses are identified allowing for pulses in the \unit[100]{fs} range. Design strategies for type-II configurations are proposed that avoid potentially unstable pulse dynamics.Comment: Main paper with supplementary material

Production and carcass traits of high dairy genetic merit Holstein, standard dairy genetic merit Friesian and Charolais × Holstein-Friesian male cattle

peer-reviewedThe increased proportion of Holstein genetic material in the dairy herd has consequences for beef production in Ireland. A total of 72 spring-born male calves (24 Holsteins (HO), 24 Friesian (FR) and 24 Charolais × Holstein-Friesians (CH)) were reared from calfhood to slaughter. Calves were artificially reared indoors and spent their first summer at pasture following which they were assigned, on a breed basis, to a factorial combination of two production systems (intensive 19-month bull beef and extensive 25-month steer beef) and two slaughter weights (560 and 650 kg). After slaughter the pistola hind quarter was separated into fat, bone and muscle. Live-weight gain, carcass gain, kill-out proportion, carcass conformation and carcass fat scores were 830, 811 and 859 (s.e. 14.9) g/day, 540, 533, 585 (s.e. 7.7) g/day, 526, 538 and 561 (s.e. 3.0) g/kg, 1.51, 2.18 and 2.96 (s.e. 0.085), and 3.40, 4.25 and 4.06 (s.e. 0.104) for HO, FR and CH, respectively. Corresponding values for pistola weight as a proportion of carcass weight, pistola muscle proportion and pistola fat proportion were 458, 459 and 461 (s.e. 2.6) g/kg, 657, 645 and 667 (s.e. 3.7) g/kg, and 132, 161 and 145 (s.e. 4.1) g/kg. Compared with the intensive system, animals on the extensive system had a lower (P < 0.001) daily live-weight gain, kill-out proportion and a lower muscle proportion in the pistola. Increasing slaughter weight increased (P < 0.001) carcass weight and carcass fat score and reduced the proportion of muscle in the pistola. Allometric regression coefficients for pistola weight on side weight, and total bone, muscle and fat weights on pistola weight were 0.898, 0.755, 0.900 and 1.910 respectively. It is concluded that HO grew at least as fast as FR but had a lower killout proportion. Carcass conformation and fat scores were greater for FR than for HO and muscle proportion in the pistola was lower and total fat proportion was higher. Compared with FR, CH had heavier carcasses, a higher kill-out proportion and less fat and more muscle in the pistola

Body and carcass measurements, carcass conformation and tissue distribution of high dairy genetic merit Holstein, standard dairy genetic merit Friesian and Charolais x Holstein-Friesian male cattle

peer-reviewedThe increased proportion of Holstein genes in the dairy herd may have undesirable consequences for beef production in Ireland. A total of 72 spring-born calves, (24 Holstein (HO), 24 Friesian (FR) and 24 Charolais X Holstein-Friesian (CH)) were reared from calfhood to slaughter. Calves were artificially reared indoors and spent their first summer at pasture following which they were assigned to a 3 breeds (HO, FR and CH) 2 production systems (intensive 19-month bull beef and extensive 25-month steer beef) 2 slaughter weights (560 and 650 kg) factorial experiment. Body measurements of all animals were recorded at the same time before the earliest slaughter date. After slaughter, carcasses were graded and measured and the pistola hind-quarter was separated into fat, bone and muscle. HO had significantly higher values for withers height, pelvic height and chest depth than FR, which in turn had higher values than CH. HO had a longer back and a narrower chest than either FR or CH, which were not significantly different. Carcass length and depth, pistola length, and leg length were 139.2, 134.4 and 132.0 (s.e. 0.81), 52.1, 51.3 and 47.7 (s.e. 0.38), 114.4, 109.0 and 107.0 (s.e. 0.65) and 76.7, 71.9 and 71.4 (s.e. 0.44) cm for HO, FR and CH, respectively. Breed differences in pistola tissue distribution between the joints were small and confined to the distal pelvic limb and ribs. There were relatively small breed differences in the distribution of pistola muscle weight between individual muscles. Body measurements were significantly greater for animals on the intensive system (bulls) than the extensive system (steers) in absolute terms, but the opposite was so when they were expressed relative to live weight. The only significant difference in relative carcass measurements between the production systems was for carcass depth, which was lower for the intensive compared with the extensive system. Increasing slaughter weight significantly increased all carcass measurements in absolute terms but reduced them relative to weight. It is concluded that there were large differences between the breed types in body and carcass measurements, and hence in carcass shape and compactness but differences in tissue distribution were small