6 research outputs found
Combination of FDM 3D Printing and Compressed Tablet for Preparation of Baclofen as Gastro-Floating Drug Delivery System (Conference Paper )#
This study aimed to develop an oral drug delivery system for gastro-retentive sustained drug release of baclofen by using a 3D printed capsular device since baclofen has a short half-life of 2.5 to 4 hours and has a narrow absorption window. Firstly sustained-release tablets of baclofen were formulated through the hot-melt extrusion of various thermoplastic polymers and direct compression of the extrudate, then a capsular device was designed and 3D printed to contain two air pockets to enable floating of the device and has four windows for drug release.
3D printing of the capsular device was done by an FDM printer using biodegradable PLA filament, and the sustained release tablets were inserted into the device to allow the medicine to be released into the stomach over a longer period. An in vitro buoyance test and an in vitro dissolution test were used to examine the buoyancy and sustained-release features of the formulated gastro-floating system.
Five sustained release formulas were developed using different thermoplastic polymers in hot-melt extrusion. Produced tablets were assayed for drug content, hardness, and friability while a DSC study was done on the selected formula. F 5 which contains 20% baclofen, 55% Eudragit RS-100, 20% ethylcellulose, and 5% PEG 4000 showed sustained release where the complete dissolution of the drug occurred in 12 hours, and the gastro-floating device remained floating all the time.
This method has a great potential for developing various floating drug delivery systems with the required release profile
Investigation of Solubility Enhancement Approaches of Ticagrelor
ABSTRACT
Ticagrelor is an orally administered antiplatelet medicine, direct-acting P2Y12-receptor antagonist. Ticagrelor binds reversibly and noncompetitively to the P2Y12 receptor at a site distinct from that of the endogenous agonist adenosine diphosphate (ADP). Inhibition of platelet aggregation stimulated by ADP is a commonly used pharmacodynamic parameter for P2Y12-receptor antagonists.
Ticagrelor is a crystalline powder with an aqueous solubility of approximately 10?g/mL at room temperature. Ticagrelor exhibits no pKa value within the physiological range. Ticagrelor does not exhibit pH-dependent solubility and is defined as ‘low solubility low permeability’ under the Biopharmaceutics Classification System (Class IV). The mean absolute bioavailability of ticagrelor in healthy volunteers is 36 %
Nanoparticles preparation and complexation is one of the recently used approaches to enhance the solubility of drugs. The aim of the present work was to improve the solubility and dissolution of ticagrelor by preparing nanoparticles and cyclodextrin inclusion complex of ticagrelor and then incorporated in to tablet dosage form. Fifteen formulas of nanoparticles were prepared by antisolvent precipitation method (solvent displacement method) utilizing one of the three polymers (PVP, Poloxamer, and HPMC) at three different drugs: polymer and solvent: anti-solvent ratios and nine formulas of cyclodextrin inclusion complex with HP?CD by three preparation methods, physical trituration, kneading and solvent evaporation, which increase the solubility and dissolution rate of ticagrelor via formation of inclusion complex with HP?CD.
The prepared formulas were characterized regarding the saturated solubility, polydispersity index, particle size by nano laser particle size analyzer, % yield, entrapment efficiency, and flowability, FTIR, DSC, and SEM. The selected formulas were prepared as tablets.
The prepared tablets were evaluated for drug content, weight variation, hardness, and friability. In vitro dissolution data of the prepared tablets were analyzed using similarity factor (f2) and dissolution efficiency (DE).
Among all the prepared nanoparticles formulas, formula (F12) which contain HPMC as a polymer at polymer: drug ratio of (1:1) and solvent: antisolvent ratio of (1:1) was considered as the optimum formula which shows good evaluation parameters in addition to the increment in the solubility to about 9 times than that of the pure drug. The nanoparticle of the selected formula (F12) incorporated tablets showed an acceptable tablet properties in addition to a considerable increase in the dissolution efficiency to (DE=92 % and 88 % in PH 1.2 and PH 6.8 respectively) in comparison to that of the marketed tablet (DE=89% and 85% in PH 1.2 and PH 6.8 respectively). Moreover, the analysis by DSC and SEM of the nanoparticles of the selected formula (F12) indicate a reduction in the crystallinity and amorphization of the drug. It can be concluded that the selected formula is a promising formula for the preparation of ticagrelor nanoparticles the incorporation in a tablet dosage form.
Regarding ticagrelor inclusion complex with HP?CD Solvent evaporation method was the most effective method regarding ticagrelor solubilization and optimum formula of inclusion complex (F23) show increment in saturated solubility about ten times that of pure drug.
The ticagrelor inclusion complex of the selected formula (F23) incorporated tablets showed an acceptable tablet properties in addition to a considerable increase in the dissolution efficiency to (DE=92 % and 90 % in PH 1.2 and PH 6.8 respectively) in comparison to that of the marketed tablet (DE=89% and 85% in PH 1.2 and PH 6.8 respectively).
Fusidic acid/tea-tree oil nanoemulsions : a potentially safe and effective anti MRSA/MSSA topical agent for chronic wound healing
Fusidic acid (FA) is clinically used as an antibacterial agent for the treatment of Gram-positive bacterial infections. It interferes with bacterial protein synthesis, specifically by preventing the translocation of the elongation factor G on the ribosome. In the present work, oil-in-water nanoemulsion (NE) was developed as a carrier for the transdermal delivery of FA. Different oils, surfactants and co-surfactants were screened. The solubility of FA, the emulsifying capacity of the surfactants and phase diagrams for each oil and surfactant mix were constructed. From the analysis, eight stable NE formulations were chosen, and their physicochemical properties were further evaluated. The antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) were also evaluated, and cytotoxicity was conducted on HS-27 cell line to determine the safety of the formula. It was found that the NE produced from tea tree oil has the most optimal stability with promising antibacterial activity against MRSA as compared to a commercially available product. The safety profile of the NE was also comparable to the commercial product; thus, the formulated FA-NE is promising for clinical use
Comparison In-vitro Release and pH Effect Among Different Oral Antidiabetic Drugs: Review Article
Diabetes is a metabolic condition that affects how the body utilizes digested food for growth and energy. The majority of the food we consume is broken down into glucose, which is the form of sugar in our blood. Glucose is the body's primary fuel source. The solubility of glibenclamide (glibenclamide), metformin, and sitagliptin were evaluated in triplicate in different pH using a water bath shaker at 37oC using the shake-flask technique. The quantity of medicine accessible for absorption is determined by the drug release. Each drug's physiochemical characteristics substantially impact release along the G.I.T. For each medication, a calibration curve and solubility measurement were performed. In the duodenum and the small intestine, glibenclamide was released more efficiently and fast than metformin and sitagliptin, which had higher pKa values than glibenclamide, i.e., the metformin and sitagliptin were released more quickly and efficiently in pH 1.2 and pH 5.8. Glibenclamide is absorbed from the stomach, if not completely
Kneading Technique for Preparation of Binary Solid Dispersion of Meloxicam with Poloxamer 188
The aim of the present study was to enhance the dissolution rate of meloxicam (MLX), a practically water-insoluble drug by preparation of solid dispersion using a hydrophilic polymer, poloxamer 188 (PXM). The kneading technique was used to prepare solid dispersions. A 32 full factorial design approach was used for optimization wherein the drug, polymer ratio (X1), and the kneading time (X2) were selected as independent variables and the dissolution efficiency at 60 min (%DE60) and yield percent were selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of MLX from PXM solid dispersions, a high level of X1 and a high level of X2 were suitable. The use of a factorial design approach helped in optimization of the preparation and formulation of solid dispersion. The optimized formula was characterized by solubility studies, angle of repose, and contact angle; Fourier transform infrared spectroscopy, differential scanning calorimetry, x-ray diffraction studies, and scanning electron microscopy demonstrated that enhanced dissolution of MLX from solid dispersion might be due to a decrease in the crystallinity of MLX and PXM. Analysis of dissolution data of optimized formula indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics as Fickian diffusion. In conclusion, dissolution enhancement of MLX was obtained by preparing its solid dispersion with PXM using kneading technique