Reducing Transfer of Salmonella and Aerobic Mesophilic Bacteria on Melon Rinds Surfaces to Fresh Juice by Washing With Chlorine: Effect of Waiting Period Before Refrigeration of Prepared Juice

Cantaloupes, honeydew melons and watermelons inoculated with Salmonella cocktail at 4.5, 3.8, and 3.2 log10 CFU/cm2, respectively, were sanitized with 200 ppm chlorine before rinds removal, cutting, and juice preparation. Efficacy of 200 ppm chlorine in reducing transfer of Salmonella, aerobic mesophilic bacteria, yeast and mold, and Pseudomonas from the melon surfaces to freshly prepared fruit juice was investigated including the effect of waiting period before refrigeration of the juices. The melon juice filtrates were refrigerated immediately or stored at room temperature (~22°C) for 3 and 5 h before refrigeration. Average Salmonella bacteria recovered in fresh melon juice prepared from unwashed whole cantaloupes, watermelon and honeydew melons was 1.4, 0.5, and 0.4 log10 CFU/ml, respectively. Juices from unwashed inoculated melons had the highest bacterial populations and storage at an abusive temperature of 10°C led to proliferation. Holding these juices at room temperature for 5 h before refrigeration allowed Salmonella bacteria to increase by 0.5–0.8 log in cantaloupe juice and 0.3–0.5 log in watermelon and honeydew juices. No Salmonella bacteria was determined in fresh juices prepared from melons washed with chlorinated water. The results of this study showed that washing melons with 200 ppm chlorine before juice preparation and immediately refrigerating the juice will minimize the chances of Salmonella proliferation

Molecular Level Comparison of Water Extractives of Maple and Oak with Negative and Positive Ion ESI FT-ICR Mass Spectrometry

Soluble extractives in wood function to protect living trees from destructive agents and also contribute to wood color and fragrance. Some extractive components have biological activities with medical applications. They also play important roles in wood processing and related applications. To increase the knowledge of wood chemistry, maple and oak were extracted by water. Ultraviolet/visible (UV/vis) spectroscopy indicated the presence of a phenolic compound, resorcinol, in maple extractives having higher molecular mass and more aromatic components than oak extractives. Negative and positive electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR-MS) identified thousands of formulas in the two samples in the m/z range of 200 to 800. They mainly fall into the lignin-like, carbohydrate-like, and tannin-like compound categories. The top 25 peaks (ie, formulas) with the highest relative magnitude in negative ESI represented nearly 50% of the summed total spectral magnitude of all formulas assigned in the maple and oak extractives. Furthermore, the base peak (ie, most abundant peak) accounted for about 14% of the total abundance in each wood sample. Literature comparisons identified 17 of 20 formulas in the top five peaks of the four spectra as specific bioactive compounds in trees and other plants, implying the potential to explore utilization of maple and oak extractives for functional and medicinal applications. The various profiling of the top 25 peaks from the two samples also suggested the possible application of FT-ICR-MS for detecting chemical markers useful in profiling and identification of wood types and sources

Chemical Composition and Thermogravimetric Behaviors of Glanded and Glandless Cottonseed Kernels

Common “glanded” (Gd) cottonseeds contain the toxic compound gossypol that restricts human consumption of the derived products. The “glandless” (Gl) cottonseeds of a new cotton variety, in contrast, show a trace gossypol content, indicating the great potential of cottonseed for agro-food applications. This work comparatively evaluated the chemical composition and thermogravimetric behaviors of the two types of cottonseed kernels. In contrast to the high gossypol content (3.75 g kg−1) observed in Gd kernels, the gossypol level detected in Gl kernels was only 0.06 g kg−1, meeting the FDA’s criteria as human food. While the gossypol gland dots in Gd kernels were visually observed, scanning electron microcopy was not able to distinguish the microstructural difference between ground Gd and Gl samples. Chemical analysis and Fourier transform infrared (FTIR) spectroscopy showed that Gl kernels and Gd kernels had similar chemical components and mineral contents, but the former was slightly higher in protein, starch, and phosphorus contents. Thermogravimetric (TG) processes of both kernels and their residues after hexane and ethanol extraction were based on three stages of drying, de-volatilization, and char formation. TG-FTIR analysis revealed apparent spectral differences between Gd and Gl samples, as well as between raw and extracted cottonseed kernel samples, indicating that some components in Gd kernels were more susceptible to thermal decomposition than Gl kernels. The TG and TG-FTIR observations suggested that the Gl kernels could be heat treated (e.g., frying and roasting) at an optimal temperature of 140–150 °C for food applications. On the other hand, optimal pyrolysis temperatures would be much higher (350–500 °C) for Gd cottonseed and its defatted residues for non-food bio-oil and biochar production. The findings from this research enhance the potential utilization of Gd and Gl cottonseed kernels for food applications

Effects of Particle Size on the Morphology and Water- and Thermo-Resistance of Washed Cottonseed Meal-Based Wood Adhesives

Water washing of cottonseed meal is more cost-efficient and environmentally friendly than protein isolation by means of alkaline extraction and acidic precipitation. Thus, water-washed cottonseed meal (WCSM) is more promising as biobased wood adhesives. In this work, we examined the effects of the particle size on the morphology and adhesive performance of WCSM. Pilot-scale produced and dried WCSM was treated by three grinding methods: (1) ground by a hammer mill and passed through a 0.5-mm screen, (2) further ground by a cyclone mill and passed through a 0.5-mm screen, or (3) further ground by a ball mill and passed through a 0.18-mm screen. Micro-morphological examination revealed two types of particles. The filament-like particles were mainly fibrous materials from residual linters. Chunk-like particles were more like aggregates or accumulations of small particles, with proteins as the major component. Further grinding of the 0.5-mm Hammer product with the Cyclone and Ball mill led to more fine (smaller) particles in the WCSM products. The impact of further grinding on the dry and soaked adhesive strengths was minimal. However, the decrease of the hot and wet strengths of WCSM products by the additional grinding was significant (p ≤ 0.05). Data presented in this work is useful in developing the industrial standards of WCSM products used in wood bonding

Survival potential of Phytophthora infestans sporangia in relation to environmental factors and late blight occurrence

Potato is an important crop globally and late blight (Phytophthora infestans) often results in severe crop loss. The cost for late blight control can be in excess of $210 million in the United States. We utilised a non-parametric density distribution analysis of local temperature (T) and relative humidity (RH), from 2005 to 2009, to assess and validate sporangia survival potential using survival model and late blight risks during the potato cropping season at Presque Isle, in the northern part of the state of Maine, USA. Modelbased analyses showed that ambient temperatures of 3−30°C and RH values of 45−100% were conducive for sporangia survival. Disease outbreaks and risk periods coincided with a high sporangia survival probability (15−35%). Due to the omission of solar radiation (SR) in the computation of survival potential in previous research, we applied a Cox proportional model to estimate the probability of sporangia survival [i.e. hazard at a specific time H(t)] as a function of baseline hazard (H0) and the influencing parameters. The model is: H(t) = H0(t) × exp(0.067ET + 0.138T + 0.083RH + 0.001SR) where ET is exposure time. The survival model indicated that RH (β = 0.083) and T (β = 0.138) were significant (p < 0.05) factors in sporangia survival in comparison to SR (β = 0.001). The hazard ratio, indicative of sporangia survival risk, varied with the predictors. For the unit increase of T, sporangia survival hazard increased by 1.148 times. The Cox model and sporangia hazard probabilities can be used for short-term disease forecasts based on the risk period most conducive for pathogen survival and targeted fungicide applications for optimum late blight management

Potato Growth and Yield Characteristics under Different Cropping System Management Strategies in Northeastern U.S.

Cropping systems and management practices that improve soil health may greatly enhance crop productivity. Four different potato cropping systems designed to address specific management goals of soil conservation (SC), soil improvement (SI), disease suppression (DS), and a status quo (SQ) standard rotation, along with a non-rotation (PP) control, were evaluated for their effects on potato crop growth, nutrient, and yield characteristics under both irrigated and non-irrigated (rainfed) conditions in field trials in Maine, USA, from 2004 to 2010. Both cropping system and irrigation significantly (p &lt; 0.05) affected most potato crop parameters associated with growth and yield. All rotations increased tuber yield relative to the non-rotation PP control, and the SI system, which included yearly compost amendments, resulted in overall higher yields and a higher percentage of large-size tubers than all other systems with no irrigation (increases of 14 to 90%). DS, which contained disease-suppressive green manures and cover crops, produced the highest yields overall under irrigation (increases of 11 to 35%). Irrigation increased tuber yields in all cropping systems except SI (average increase of 27&ndash;37%). SI also resulted in significant increases in leaf area duration and chlorophyll content (as indicators of photosynthetic potential) and root and shoot biomass relative to other cropping systems, particularly under non-irrigated conditions. SI also resulted in higher shoot and tuber tissue concentrations of N, P, and K, but not most micronutrients. Overall, cropping systems that incorporate management practices such as increased rotation length and the use of cover crops, green manures, reduced tillage, and particularly, organic amendments, can substantially improve potato crop growth and yield. Irrigation also substantially increased growth and yield under normal field conditions in Maine, but SI, with its large organic amendments, was essentially a substitute for irrigation, producing comparable results without irrigation

Potato Growth and Yield Characteristics under Different Cropping System Management Strategies in Northeastern U.S.

Cropping systems and management practices that improve soil health may greatly enhance crop productivity. Four different potato cropping systems designed to address specific management goals of soil conservation (SC), soil improvement (SI), disease suppression (DS), and a status quo (SQ) standard rotation, along with a non-rotation (PP) control, were evaluated for their effects on potato crop growth, nutrient, and yield characteristics under both irrigated and non-irrigated (rainfed) conditions in field trials in Maine, USA, from 2004 to 2010. Both cropping system and irrigation significantly (p < 0.05) affected most potato crop parameters associated with growth and yield. All rotations increased tuber yield relative to the non-rotation PP control, and the SI system, which included yearly compost amendments, resulted in overall higher yields and a higher percentage of large-size tubers than all other systems with no irrigation (increases of 14 to 90%). DS, which contained disease-suppressive green manures and cover crops, produced the highest yields overall under irrigation (increases of 11 to 35%). Irrigation increased tuber yields in all cropping systems except SI (average increase of 27–37%). SI also resulted in significant increases in leaf area duration and chlorophyll content (as indicators of photosynthetic potential) and root and shoot biomass relative to other cropping systems, particularly under non-irrigated conditions. SI also resulted in higher shoot and tuber tissue concentrations of N, P, and K, but not most micronutrients. Overall, cropping systems that incorporate management practices such as increased rotation length and the use of cover crops, green manures, reduced tillage, and particularly, organic amendments, can substantially improve potato crop growth and yield. Irrigation also substantially increased growth and yield under normal field conditions in Maine, but SI, with its large organic amendments, was essentially a substitute for irrigation, producing comparable results without irrigation