Dental restorations for oral rehabilitation – testing of laboratory properties versus clinical performance for clinical decision making *

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73116/1/j.1365-2842.2007.01812.x.pd

Reaction of fibroblasts to various dental casting alloys

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72968/1/j.1600-0714.1988.tb01547.x.pd

Fluoride content and recharge ability of five glassionomer dental materials

<p>Abstract</p> <p>Background</p> <p>The relationship between fluoride content and fluoride release for glass-ionomer cements is not well understood. The aim of this laboratory study was: to determine the fluoride concentrations at the surfaces of glass-ionomer materials with respect to different storage media and different pH environments; to examine the recharge ability of the materials after NaF immersion; and to assess the morphological changes at the material surfaces using scanning electron microscope and energy dispersive spectroscopic techniques (SEM/EDS).</p> <p>Methods</p> <p>Five glass-ionomer materials, Fuji Triage (FT), Fuji II LC (FII), Fuji VIII (FVIII), Fuji IX GP (FIX), and Ketac N100 (KN), were analyzed in this study. Resin-based fluoride releasing material Helioseal F (HSF) was used as a comparison material. The sample consisted of 120 cured cement disks (n = 20 disks of each tested material, 10 × 1.5 mm). Five disks of each material were stored in 4 different storage media (I- saline, II- acidic solution ph = 2.5, III- acid solution ph = 5.5, IV- NaF solution (c = 500/106). After 7 days, two disks of each material were transferred from media I, II and III to the NaF solution for 3 min. EDS analysis was conducted in 3 randomly selected spots of each experimental disk. SEM was used to determine morphological characteristics of the material surface. Differences between the experimental groups have been analyzed using Student's t-test with the level of significance set at p < 0.001.</p> <p>Results</p> <p>FT showed the highest fluoride content at the surface of the material. The lowest amounts of fluoride ions were detected at the surfaces of the FT disks stored at low pH environments, and this difference was statistically significant (p < 0.001). Glass-ionomers showed significantly higher fluoride concentrations when compared to the HSF (p < 0.001). After immersion in the NaF solution, fluoride concentrations at the surfaces of the disks increased when compared with previous storage media (FT>FVIII>KN>FII>FIX). SEM analysis of the surface morphology revealed numerous voids, cracks and microporosities in all experimental groups, except for KN and HSF. More homogenous material structure with more discrete cracks was observed in samples stored at neutral pH environment, compared to disks stored in acidic solutions.</p> <p>Conclusion</p> <p>The tested materials could be considered as promising dental materials with potential prophylactic characteristics due to their relatively high fluoride content, but also the ability to extensively reabsorb fluoride ions, especially in acidic environments.</p

The Microfloral Analysis of Secondary Caries Biofilm around Class I and Class II Composite and Amalgam Fillings

<p>Abstract</p> <p>Background</p> <p>Secondary caries is responsible for 60 percent of all replacement restorations in the typical dental practice. The diversity of the bacterial sources and the different types of filling materials could play a role in secondary caries. The aim of this study was to determine and compare the microbial spectrum of secondary caries biofilms around amalgam and composite resin restorations.</p> <p>Methods</p> <p>Clinical samples were collected from freshly extracted teeth diagnosed with clinical secondary caries. Samples were categorized into four groups according to the types of restoration materials and the classification of the cavity. Biofilms were harvested from the tooth-restoration interface using a dental explorer and after dilution were incubated on special agars. The bacteria were identified using the biochemical appraisal system. Statistical calculations were carried out using SPSS11.5 software to analyze the prevalence of the bacteria involved in secondary caries.</p> <p>Results</p> <p>Samples from a total of four groups were collected: two groups were collected from amalgam restorations, each had 21 samples from both Class I and Class II caries; and the other two groups were from composite resin restorations, each had 13 samples from both class I and class II caries. Our results showed: (1) Anaerobic species were dominant in both restoration materials. (2) In terms of the types of individual bacteria, no significant differences were found among the four groups according to the geometric mean of the detected bacteria (P > 0.05). However, there were significant differences among the detected bacteria within each group (P < 0.05). The composition of each bacterium had no statistical difference among the four groups (P > 0.05), but showed significant differences among the detected bacteria in each group (P < 0.05). (3) Among the four groups, there were no significant differences for the detection rate of each bacterium (P > 0.05), however, the detection rate of each bacterium within each group was statistically different among the detected bacteria (P < 0.05).</p> <p>Conclusions</p> <p>The proportion of obligatory anaerobic species was much greater than the facultative anaerobic species in the biofilm of secondary caries. Statistically, the materials of restoration and the location of secondary caries did not show any significant effects on the composition of the microflora.</p