Vanadium microalloyed steel for thin slab casting and direct rolling

Vanadium microalloyed steels with high yield strength (»600 MPa), good toughness and ductility have been successfully produced in commercial thin slab casting plants employing direct rolling after casting. Because of the high solubility of VN and VC, most of the vanadium is likely to remain in solution during casting, equalisation and rolling. While some vanadium is precipitated in austenite as cuboids and pins the grain boundaries, a major fraction is available for dispersion strengthening of ferrite. Despite a coarse as-cast grain size, significant grain refinement can be achieved by repeated recrystallisation during hot rolling. Consequently, a fine and uniform ferrite grain structure is produced in the final strip. Increasing the V and N levels increases dispersion strengthening which occurs together with a finer ferrite grain size. The addition of titanium to a vanadium containing steel, decreases the yield strength due to the formation of V-Ti(N) particles in austenite during both casting and equalisation These large particles reduced the amount of V and N available for subsequent precipitation of fine (~5nm) V rich dispersion strengthening particles in ferrite

Mitchell Baker Family History

This PDF includes information over my family and my ancestors. Familysearch.org and findagrave.com were assets that were used to find the majority of the information. Family stories were given to me by relatives that I was able to put together with other sources to make my family history

Simultaneous chromatic dispersion, polarization-mode-dispersion and OSNR monitoring at 40Gbit/s

A novel method for independent and simultaneous monitoring of chromatic dispersion ( CD), first-order PMD and OSNR in 40Gbit/s systems is proposed and demonstrated. This is performed using in-band tone monitoring of 5GHz, optically down-converted to a low intermediate-frequency (IF) of 10kHz. The measurement provides a large monitoring range with good accuracies for CD (4742 +/- 100ps/nm), differential group delay (DGD) (200 +/- 4ps) and OSNR (23 +/- 1dB), independently of the bit-rate. In addition, the use of electro-absorption modulators (EAM) for the simultaneous down-conversion of all channels and the use of low-speed detectors makes it cost effective for multi-channel operation. (C) 2008 Optical Society of Americ

Concepts for 18/30 GHz satellite communication system study. Executive summary

An examination of a multiplicity of interconnected parameters ranging from specific technology details to total system economic costs for satellite communication systems at the 18/30 GHz transmission bands are presented. It was determined that K sub A band systems can incur a small communications outage during very heavy rainfall periods and that reducing the outage to zero would lead to prohibitive system costs. On the other hand, the economics of scale, ie, one spacecraft accommodating 2.5 GHz of bandwidth coupled with multiple beam frequency reuse, leads to very low costs for those users who can tolerate the 5 to 50 hours per year of downtime. A multiple frequency band satellite network can provide the ultimate optimized match to the consumer performance/economics demands

Investigating the Feasibility of Incorporating an Agricultural Education Component: A Case Study of the Girl Power Project

The Girl Power Project is an existing girl’s empowerment program developed by the Just Like My Child Foundation in rural Uganda that equips girls to improve the wellbeing of their families and communities through the teaching of life skills and establishing of mentoring training. This program has experienced growth and success in their outreach to adolescent youth and has far reach into over 40 schools and communities in the Luweero Triangle where the programs are offered. According to the directors of the program, nearly all stakeholders of these communities have close ties to agriculture as a livelihood. However, agriculture education currently plays no role in the Girl Power Project curriculum. What is the feasibility of Just Like My Child to develop an agriculture education component for the Girl power Project, and for what challenges and opportunities should they be expecting and prepared for? This thesis study employs a case study method using semi-structured interviews among key stakeholder groups to answer this question

Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure

A study simulating thin slab continuous casting followed by direct charging into an equalisation furnace has been undertaken based on six low carbon (0.06wt-%) vanadium microalloyed steels. Mechanical and impact test data showed properties were similar or better than those obtained from similar microalloyed conventional thick cast as rolled slabs. The dispersion plus dislocation strengthening was estimated to be in the range 80-250MPa.A detailed TEM/EELS analysis of the dispersion sized sub-15nm particles showed that in all the steels, they were essentially nitrides with little crystalline carbon detected. In the Steels V-Nb, V-Ti and V-Nb-Ti, mixed transition metal nitrides were present. Modelling of equilibrium precipitates in these steels, based on a modified version of ChemSage, predicted that only vanadium rich nitrides would precipitate in austenite but that the C/N ratio would increase through the two phase field and in ferrite. The experimental analytical data clearly points to the thin slab direct charging process, which has substantially higher cooling rates than conventional casting, nucleating non-equilibrium particles in ferrite which are close to stoichiometric nitrides. These did not coarsen during the final stages of processing, but retained their highly stable average size of ~7nm resulting in substantial dispersion strengthening. The results are considered in conjunction with pertinent published literature