11 research outputs found
Chapter 3: MHD stability, operational limits and disruptions
Progress in the area of MHD stability and disruptions, since the
publication of the 1999 ITER Physics Basis document (1999 Nucl.
Fusion 39 2137-2664), is reviewed. Recent theoretical and
experimental research has made important advances in both understanding
and control of MHD stability in tokamak plasmas. Sawteeth are
anticipated in the ITER baseline ELMy H-mode scenario, but the tools
exist to avoid or control them through localized current drive or fast
ion generation. Active control of other MHD instabilities will most
likely be also required in ITER. Extrapolation from existing experiments
indicates that stabilization of neoclassical tearing modes by highly
localized feedback-controlled current drive should be possible in ITER.
Resistive wall modes are a key issue for advanced scenarios, but again,
existing experiments indicate that these modes can be stabilized by a
combination of plasma rotation and direct feedback control with
non-axisymmetric coils. Reduction of error fields is a requirement for
avoiding non-rotating magnetic island formation and for maintaining
plasma rotation to help stabilize resistive wall modes. Recent
experiments have shown the feasibility of reducing error fields to an
acceptable level by means of non-axisymmetric coils, possibly controlled
by feedback. The MHD stability limits associated with advanced scenarios
are becoming well understood theoretically, and can be extended by
tailoring of the pressure and current density profiles as well as by
other techniques mentioned here. There have been significant advances
also in the control of disruptions, most notably by injection of massive
quantities of gas, leading to reduced halo current fractions and a
larger fraction of the total thermal and magnetic energy dissipated by
radiation. These advances in disruption control are supported by the
development of means to predict impending disruption, most notably using
neural networks. In addition to these advances in means to control or
ameliorate the consequences of MHD instabilities, there has been
significant progress in improving physics understanding and modelling.
This progress has been in areas including the mechanisms governing NTM
growth and seeding, in understanding the damping controlling RWM
stability and in modelling RWM feedback schemes. For disruptions there
has been continued progress on the instability mechanisms that underlie
various classes of disruption, on the detailed modelling of halo
currents and forces and in refining predictions of quench rates and
disruption power loads. Overall the studies reviewed in this chapter
demonstrate that MHD instabilities can be controlled, avoided or
ameliorated to the extent that they should not compromise ITER
operation, though they will necessarily impose a range of constraints
Overview of the FTU results
Spontaneous increases in plasma density, up to similar to 1.6 times the Greenwald value, are observed in FTU with lithized walls. These plasmas are characterized by profile peaking up to the highest obtained densities. The transport analysis of these discharges shows a 20% enhancement of the energy confinement time, with respect to the ITER97 L-mode scaling, correlated with a threshold in the peaking factor. It has been found that 0.4 MW of ECRH power, coupled at q = 2 surface, are sufficient to avoid disruptions in 0.5 MA discharges. Direct heating of magnetic islands produced by MHD modes determines current quench delay or avoidance. Supra-thermal electrons generated by 0.5 MW of lower hybrid power are sufficient to trigger precursors of the electron-fishbone instability. Evidence of spatial redistribution of fast electrons, on the similar to 100 mu s typical mode timescale, is shown by the fast electrons bremsstrahlung diagnostic. From the presence of new magnetic island induced accumulation points in the continuous spectrum of the shear Alfven wave spectrum, the existence of new magnetic island induced Alfven eigenmodes (MiAE) is suggested. Due to the frequency dependence on the magnetic island size, the feasibility of utilizing MiAE continuum effects as a novel magnetic island diagnostic is also discussed. Langmuir probes have been used on FTU to identify hypervelocity (10 km s(-1)), micrometre size, dust grains. The Thomson scattering diagnostic was also used to characterize the dust grains, present in the FTU vacuum chamber, following a disruption. Analysis of the broad emitted light spectrum was carried out and a model taking into account the particle vaporization is compared with the data. A new oblique ECE diagnostic has been installed and the first results, both in the presence of lower hybrid or electron cyclotron waves, are being compared with code predictions. A time-of-flight refractometer at 60 GHz, which could be a good candidate for the ITER density feedback control system, has also been tested
Recommended from our members
Recent D-T results on TFTR
Routine tritium operation in TFTR has permitted investigations of alpha particle physics in parameter ranges resembling those of a reactor core. ICRF wave physics in a DT plasma and the influence of isotopic mass on supershot confinement have also been studied. Continued progress has been made in optimizing fusion power production in TFTR, using extended machine capability and Li wall conditioning. Performance is currently limited by MHD stability. A new reversed magnetic shear regime is being investigated with reduced core transport and a higher predicted stability limit
Recommended from our members
Overview of DT results from TFTR
Experiments with plasmas having nearly equal concentrations of deuterium and tritium have been carried out on TFTR. To date (September 1995), the maximum fusion power has been 10.7 MW, using 39.5 MW of neutral beam heating, in a supershot discharge and 6.7 MW in a high beta discharge following a current ramp-down. The fusion power density in the core of the plasma has reached 2.8 MW/m , exceeding that expected in the International Thermonuclear Experimental Reactor (ITER). The energy confinement time tau is observed to increase in DT, relative to D plasmas, by 20% and the n (0).T (0). tau product by 55%. The improvement in thermal confinement is caused primarily by a decrease in ion heat conductivity in both supershot and limiter H mode discharges. Extensive lithium pellet injection increased the confinement time to 0.27 s and enabled higher current operation in both supershot and high beta discharges. First measurements of the confined alpha particles have been performed and found to be in good agreement with TRANSP simulations assuming classical confinement. Measurements of the alpha ash profile have been compared with simulations using particle transport coefficients from helium gas puffing experiments. The loss of energetic alpha particles to a detector at the bottom of the vessel is well described by the first-orbit loss mechanism. No loss due to alpha particle driven instabilities has yet been observed. ICRF heating of a DT plasma, using the second harmonic of tritium, has been demonstrated. DT experiments on TFTR will continue both to explore the physics underlying the ITER design and to examine some of the physics issues associated with an advanced tokamak reactor. P E 1 1 E P
Recommended from our members
Overview of DT results from TFTR
Experiments with plasmas having nearly equal concentrations of deuterium and tritium have been carried out on TFTR. To date (September 1995), the maximum fusion power has been 10.7 MW, using 39.5 MW of neutral beam heating, in a supershot discharge and 6.7 MW in a high beta P discharge following a current ramp-down. The fusion power density in the core of the plasma has reached 2.8 MW/m3, exceeding that expected in the International Thermonuclear Experimental Reactor (ITER). The energy confinement time tau E is observed to increase in DT, relative to D plasmas, by 20% and the n1(0).T1(0). tau E product by 55%. The improvement in thermal confinement is caused primarily by a decrease in ion heat conductivity in both supershot and limiter H mode discharges. Extensive lithium pellet injection increased the confinement time to 0.27 s and enabled higher current operation in both supershot and high beta P discharges. First measurements of the confined alpha particles have been performed and found to be in good agreement with TRANSP simulations assuming classical confinement. Measurements of the alpha ash profile have been compared with simulations using particle transport coefficients from helium gas puffing experiments. The loss of energetic alpha particles to a detector at the bottom of the vessel is well described by the first-orbit loss mechanism. No loss due to alpha particle driven instabilities has yet been observed. ICRF heating of a DT plasma, using the second harmonic of tritium, has been demonstrated. DT experiments on TFTR will continue both to explore the physics underlying the ITER design and to examine some of the physics issues associated with an advanced tokamak reactor
Recommended from our members
Deuterium–tritium plasmas in novel regimes in the Tokamak Fusion Test Reactor
Experiments in the Tokamak Fusion Test Reactor (TFTR) [Phys. Plasmas 2, 2176 (1995)] have explored several novel regimes of improved tokamak confinement in deuterium–tritium (D–T) plasmas, including plasmas with reduced or reversed magnetic shear in the core and high-current plasmas with increased shear in the outer region (high [formula omitted]). New techniques have also been developed to enhance the confinement in these regimes by modifying the plasma-limiter interaction through in situ deposition of lithium. In reversed-shear plasmas, transitions to enhanced confinement have been observed at plasma currents up to 2.2 MA [formula omitted] accompanied by the formation of internal transport barriers, where large radial gradients develop in the temperature and density profiles. Experiments have been performed to elucidate the mechanism of the barrier formation and its relationship with the magnetic configuration and with the heating characteristics. The increased stability of high-current, high-[formula omitted] plasmas produced by rapid expansion of the minor cross section, coupled with improvement in the confinement by lithium deposition has enabled the achievement of high fusion power, up to 8.7 MW, with D–T neutral beam heating. The physics of fusion alpha-particle confinement has been investigated in these regimes, including the interactions of the alphas with endogenous plasma instabilities and externally applied waves in the ion cyclotron range of frequencies. In D–T plasmas with [formula omitted] and weak magnetic shear in the central region, a toroidal Alfvén eigenmode instability driven purely by the alpha particles has been observed for the first time. The interactions of energetic ions with ion Bernstein waves produced by mode conversion from fast waves in mixed-species plasmas have been studied as a possible mechanism for transferring the energy of the alphas to fuel ions. © 1997, American Institute of Physics. All rights reserved
Recommended from our members
Recent D-T results on TFTR
Routine tritium operation in TFTR has permitted investigations of alpha particle physics in parameter ranges resembling those of a reactor core. ICRF wave physics in a DT plasma and the influence of isotopic mass on supershot confinement have also been studied. Continued progress has been made in optimizing fusion power production in TFTR, using extended machine capability and Li wall conditioning. Performance is currently limited by MHD stability. A new reversed magnetic shear regime is being investigated with reduced core transport and a higher predicted stability limit
Recommended from our members
Deuterium–tritium plasmas in novel regimes in the Tokamak Fusion Test Reactor
Experiments in the Tokamak Fusion Test Reactor (TFTR) [Phys. Plasmas 2, 2176 (1995)] have explored several novel regimes of improved tokamak confinement in deuterium–tritium (D–T) plasmas, including plasmas with reduced or reversed magnetic shear in the core and high-current plasmas with increased shear in the outer region (high [formula omitted]). New techniques have also been developed to enhance the confinement in these regimes by modifying the plasma-limiter interaction through in situ deposition of lithium. In reversed-shear plasmas, transitions to enhanced confinement have been observed at plasma currents up to 2.2 MA [formula omitted] accompanied by the formation of internal transport barriers, where large radial gradients develop in the temperature and density profiles. Experiments have been performed to elucidate the mechanism of the barrier formation and its relationship with the magnetic configuration and with the heating characteristics. The increased stability of high-current, high-[formula omitted] plasmas produced by rapid expansion of the minor cross section, coupled with improvement in the confinement by lithium deposition has enabled the achievement of high fusion power, up to 8.7 MW, with D–T neutral beam heating. The physics of fusion alpha-particle confinement has been investigated in these regimes, including the interactions of the alphas with endogenous plasma instabilities and externally applied waves in the ion cyclotron range of frequencies. In D–T plasmas with [formula omitted] and weak magnetic shear in the central region, a toroidal Alfvén eigenmode instability driven purely by the alpha particles has been observed for the first time. The interactions of energetic ions with ion Bernstein waves produced by mode conversion from fast waves in mixed-species plasmas have been studied as a possible mechanism for transferring the energy of the alphas to fuel ions. © 1997, American Institute of Physics. All rights reserved
Recommended from our members
TFTR DT experiments
The Tokamak Fusion Test Reactor (TFTR) is a large tokamak which has performed experiments with 50:50 deuterium-tritium fuelled plasmas. Since 1993, TFTR has produced about 1090 D-T plasmas using about 100 grams of tritium and producing about 1.6 GJ of D-T fusion energy. These plasmas have significant populations of 3.5 MeV alphas (the charged D-T fusion product). TFTR research has focused on alpha particle confinement, alpha driven modes, and alpha heating studies. Maximum D-T fusion power production has aided these studies, requiring simultaneously operation at high input heating power and large energy confinement time (to produce the highest temperature and density), while maintaining low impurity content. The principal limitation to the TFTR fusion power production was the disruptive stability limit. Secondary limitations were the confinement time, and limiter power handling capability. © 1997 IOP Publishing Ltd