An analysis of bi-directional use of frequencies for satellite communications

The bi-directional use of frequencies allocated for space communications has the potential to double the orbit/spectrum capacity available. The technical feasibility of reverse band use (RBU) at C-band (4 GHz uplinks and 6 GHz downlinks) is studied. The analysis identifies the constraints under which both forward and reverse band use satellite systems can share the same frequencies with terrestrial, line of sight transmission systems. The results of the analysis show that RBU satellite systems can be similarly sized to forward band use (FBU) satellite systems. In addition, the orbital separation requirements between RBU and FBU satellite systems are examined. The analysis shows that a carrier to interference ratio of 45 dB can be maintianed between RBU and FBU satellites separated by less than 0.5 deg., and that a carrier to interference ratio of 42 dB can be maintained in the antipodal case. Rain scatter propagation analysis shows that RBU and FBU Earth stations require separation distances fo less than 10 km at a rain rate of 13.5 mm/hr escalating to less than 100 km at a rain rate of 178 mm/hr for Earth station antennas in the 3 to 10 m range

Superintegrable Systems in Darboux spaces

Almost all research on superintegrable potentials concerns spaces of constant curvature. In this paper we find by exhaustive calculation, all superintegrable potentials in the four Darboux spaces of revolution that have at least two integrals of motion quadratic in the momenta, in addition to the Hamiltonian. These are two-dimensional spaces of nonconstant curvature. It turns out that all of these potentials are equivalent to superintegrable potentials in complex Euclidean 2-space or on the complex 2-sphere, via "coupling constant metamorphosis" (or equivalently, via Staeckel multiplier transformations). We present tables of the results

The Angular Momentum Operator in the Dirac Equation

The Dirac equation in spherically symmetric fields is separated in two different tetrad frames. One is the standard cartesian (fixed) frame and the second one is the diagonal (rotating) frame. After separating variables in the Dirac equation in spherical coordinates, and solving the corresponding eingenvalues equations associated with the angular operators, we obtain that the spinor solution in the rotating frame can be expressed in terms of Jacobi polynomials, and it is related to the standard spherical harmonics, which are the basis solution of the angular momentum in the Cartesian tetrad, by a similarity transformation.Comment: 13 pages,CPT-94/P.3027,late

Applications of satellite data relay to problems of field seismology

A seismic signal processor was developed and tested for use with the NOAA-GOES satellite data collection system. Performance tests on recorded, as well as real time, short period signals indicate that the event recognition technique used is nearly perfect in its rejection of cultural signals and that data can be acquired in many swarm situations with the use of solid state buffer memories. Detailed circuit diagrams are provided. The design of a complete field data collection platform is discussed and the employment of data collection platforms in seismic network is reviewed

Process feasibility study in support of silicon material task 1

Initial results for gas thermal conductivity of silicon tetrafluoride and trichlorosilane are reported in respective temperature ranges of 25 to 400 C and 50 to 400 C. For chemical engineering analyses, the preliminary process design for the original silane process of Union Carbide was completed for Cases A and B, Regular and Minimum Process Storage. Included are raw material usage, utility requirements, major process equipment lists, and production labor requirements. Because of the large differences in surge tankage between major unit operations the fixed capital investment varied from $19,094,000 to$11,138,000 for Cases A and B, respectively. For the silane process the original flowsheet was revised for a more optimum arrangement of major equipment, raw materials and operating conditions. The initial issue of the revised flowsheet (Case C) for the silane process indicated favorable cost benefits over the original scheme

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 1B: Concise review

Reports on the design process, support of the design process, IPAD System design catalog of IPAD technical program elements, IPAD System development and operation, and IPAD benefits and impact are concisely reviewed. The approach used to define the design is described. Major activities performed during the product development cycle are identified. The computer system requirements necessary to support the design process are given as computational requirements of the host system, technical program elements and system features. The IPAD computer system design is presented as concepts, a functional description and an organizational diagram of its major components. The cost and schedules and a three phase plan for IPAD implementation are presented. The benefits and impact of IPAD technology are discussed