Schottky barriers measurements through Arrhenius plots in gas sensors based on semiconductor films

The oxygen adsorption effects on the Schottky barriers height measurements for thick films gas sensors prepared with undoped nanometric SnO2 particles were studied. From electrical measurements, the characteristics of the intergranular potential barriers developed at intergrains were deduced. It is shown that the determination of effective activation energies from conduction vs. 1/temperature curves is not generally a correct manner to estimate barrier heights. This is due to gas adsorption/desorption during the heating and cooling processes, the assumption of emission over the barrier as the dominant conduction mechanism, and the possible oxygen diffusion into or out of the grains.Fil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Effects of previous treatments on the electrical response of SnO2-thick films exposed to a CO atmosphere

The influence of CO on the electrical conductivity on SnO2 thick films is studied. Possible sensing mechanisms are discerned by measuring the conductivity as a function of temperature during heating and cooling, and the transient responses to step changes in CO pressure at constant temperature. Studies of samples with prior treatments confirm the proposed mechanisms responsible for the observed film responses. The film conductivity is affected by CO adsorption and by reaction with previously adsorbed oxygen. Also, the oxygen vacancy concentration in the grains can be altered and, as a consequence, the sample resistivity.Fil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Field-Assisted and Thermionic Contributions to Conductance in SnO2 Thick-Films

A deep analysis of conductance in nanostructured SnO2 thick films has been performed. A model for field-assisted thermionic barrier crossing is being proposed to explain the film conductivity. Themodel has been applied to explain the behavior of resistance in vacuum of two sets of nanostructured thick-films with grains having two well-distinct characteristic radii (R = 25nm and R = 125 nm). In the first case the grain radius is shorter than the depletion region width, a limit at which overlapping of barriers takes place, and in the second case it is longer. The behavior of resistance in the presence of dry air has been explained through the mechanism of barrier modulation through gas chemisorption.Fil: Malagú, C.. Universita Di Ferrara; ItaliaFil: Carotta, M. Cristina. Universita Di Ferrara; ItaliaFil: Martinelli, Giuliano. Universita Di Ferrara; ItaliaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Grain size effect on the electrical response of SnO2 thin and thick film gas sensors

Porous nano and micro crystalline tin oxide films were deposited by RF Magnetron Sputtering and doctor blade techniques, respectively. Electrical resistance and impedance spectroscopy measurements, as a function of temperature and atmosphere, were performed in order to determine the influence of the microstructure and working conditions over the electrical response of the sensors. The conductivity of all samples increases with the temperature and decreases in oxygen, as expected for an n-type semiconducting material. The impedance plots indicated the existence of two time constants related to the grains and the grain boundaries. The Nyquist diagrams at low frequencies revealed the changes that took place in the grain boundary region, with the contribution of the grains being indicated by the formation of a second semicircle at high frequencies. The better sensing performance of the doctor bladed samples can be explained by their lower initial resistance values, bigger grain sizes and higher porosity.Fil: Savu, Raluca. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Joanni, Ednan. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Bueno, Paulo Roberto. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Cilense, Mario. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Varela, Jose Arana. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Longo, Elson. Universidade Estadual Paulista Julio de Mesquita Filho; Brasi

Study of the oxygen vacancies changes in SnO2 polycrystalline thick films using impedance and photoemission spectroscopies

Changes in the concentration of oxygen vacancies within the grains of polycrystalline SnO2, due to different atmosphere exposures, were detected using impedance and photoemission spectroscopies. From measured capacitance values, variations of the potential barrier widths could be determined. It is shown that under the presence of an oxygen rich atmosphere, at relatively low temperature, the width of intergranular potential barriers increase to the point that grains become completely depleted of carriers. With subsequent exposure to vacuum, capacitance adopts a higher value, indicative of intergranular barriers and quasi-neutral regions at the center of the grains. X-ray and ultraviolet photoemission spectroscopy measurements showed that SnO2 samples treated in oxidizing or reducing environments have similar barrier heights and different work functions. Results are especially relevant in the study of mechanisms responsible for metal oxide gas sensingFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Joanni, Ednan. CTI Renato Archer. Sao Paulo; BrasilFil: Williams, Federico Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Vanadium doping effect on multifunctionality of SnO2 nanoparticles

In the present study, tin oxide (SnO2) nanoparticles were synthesized by a precursor polymeric method. The obtained nanoparticles were doped with vanadium. The samples were characterized by powder XRD, TEM, optical UV and EPR studies. XRD and TEM showed the rutile crystal structure and its revealed that the lattice cell parameters and particles size were decreased with dopant level. Optical and EPR data confirmed that the doped V enters into SnO2 and distorted the host material symmetry. The films sensing characteristics have been studied from the aspect of doping level of sensing material and microstructure. It is found that V doping on SnO2 enhance sensor sensitivity towards CO gas. The results demonstrated that V doping can improving numerous applications which the SnO2 response is maximized.Fil: Alvarez Roca, Roman. Universidade Federal do São Carlos; BrasilFil: Desimone, Paula Mariela. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: da Silva, Mitchell. Universidade Federal do São Carlos; BrasilFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Longo, Elson. Universidade Federal do São Carlos; Brasi

Modification of sensitivity of BaSnO3 sensor due to parameters of synthesis and formation of the device

Powders of BaSnO3 were synthesized to obtain gas sensor thick films (using the screen printing technique) for the detection of O2 and CO. Impedance spectroscopy was used at different atmospheres and temperatures. In the presence of O2, the films showed a maximum value of sensitivity at 300 °C, with the powders formed by Pechini presenting greater reproducibility and sensitivity (with an order of magnitude greater than that for the powders formed by precipitation). Results showed that the films formed with powders obtained using the Pechini method presented a better response to CO, with a maximum sensitivity at 450 °C. In addition, in the presence of CO and for T > 250 °C, these films showed an anomalous behavior regarding their sensitivity as a function of time when platinum electrodes were used: a great increase in the electrical resistance value for exposure times greater than 10 min.Fil: Ochoa, Yasser H.. Universidad del Cauca; ColombiaFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Rodriguez Paez, Jorge Enrique. Universidad del Cauca; ColombiaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Novel approaches of nanoceria with magnetic, photoluminescent, and gas-sensing properties

The modification of CeO2 with rare-earth elements opens up a wide range of applications as biomedical devices using infrared emission as well as magnetic and gas-sensing devices, once the structural, morphological, photoluminescent, magnetic, electric, and gas-sensing properties of these systems are strongly correlated to quantum electronic transitions between rare-earth f-states among defective species. Quantitative phase analysis revealed that the nanopowders are free from secondary phases and crystallize in the fluorite-type cubic structure. Magnetic coercive field measurements on the powders indicate that the substitution of cerium with lanthanum (8 wt %), in a fluorite-type cubic structure, created oxygen vacancies and led to a decrease in the fraction of Ce species in the 3+ state, resulting in a stronger room-temperature ferromagnetic response along with high coercivity (160 Oe). In addition to the magnetic and photoluminescent behavior, a fast response time (5.5 s) was observed after CO exposure, indicating that the defective structure of ceria-based materials corresponds to the key of success in terms of applications using photoluminescent, magnetic, or electrical behaviors.Fil: Rocha, Leandro S.R.. Universidade Federal do São Carlos; BrasilFil: Amoresi, Rafael A.C.. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Moreno, Henrique. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Ramirez, Miguel A.. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Foschini, Cesar R.. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Longo, Elson. Universidade Federal do São Carlos; BrasilFil: Simões, Alexandre Z.. Universidade Estadual Paulista Julio de Mesquita Filho; Brasi

Low-temperature impedance spectroscopic analyses of ceramic electrodes based on Mo and Co co-doped SnO2

Low resistive electrodes based on Co and Mo co-doped SnO2 were prepared by the conventional solid-state reaction and sintered at 1250 °C for 2 h. Concentration of Co2O3 precursor was unchanged (1 mol%), while MoO3 was varied (0.25, 0.50 to 0.75 mol%) to promote conductivity. The structural and microstructural characterization revealed that the samples have a rutile-type structure without secondary phases and large rutile grains with low porosity. Electrical measurements on DC mode have shown a semiconductor behaviour of the SnO2 samples doped with 0.25 and 0.75 at. % of Mo at temperatures below 50 K, indicating their suitability for low-temperature electronic applications. Impedance measurements indicate reduced energy barriers of less than 1 meV formed between highly conductive crystallites for the SnO2 samples doped with 0.25 and 0.75 at. % of Mo. The sample with Mo content of 0.50 at. % presented a higher energy barrier at a few hundredths of eV, with space charges at the crystallite boundaries.Fil: Ferreira, Diego. Universidade Federal de Itajubá; BrasilFil: Vaz, Isabela. Universidade Federal de Itajubá; BrasilFil: Rubinger, Rero. Universidade Federal de Itajubá; BrasilFil: Buono, Camila. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Rocha, Leandro. Universidade Federal do São Carlos; BrasilFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Longo, Elson. Universidade Federal do São Carlos; BrasilFil: Simoes, Wilma Alexandre. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Moura, Francisco. Universidade Federal de Itajubá; Brasi

Synthesis and defect characterization of hybrid ceria nanostructures as a possible novel therapeutic material towards COVID-19 mitigation

This study reports the synthesis of hybrid nanostructures composed of cerium dioxide and microcrystalline cellulose prepared by the microwave-assisted hydrothermal route under distinct temperature and pH values. Their structural, morphological and spectroscopic behaviors were investigated by X-Rays Diffraction, Field Emission Gun Scanning Electron Microscopy, High-Resolution Transmission Electron Microscopy, and Fourier-Transform Infrared, Ultraviolet–Visible, Raman and Positron Annihilation Lifetime spectroscopies to evaluate the presence of structural defects and their correlation with the underlying mechanism regarding the biocide activity of the studied material. The samples showed mean crystallite sizes around 10 nm, characterizing the formation of quantum dots unevenly distributed along the cellulose surface with a certain agglomeration degree. The samples presented the characteristic Ce–O vibration close to 450 cm−1 and a second-order mode around 1050 cm−1, which is indicative of distribution of localized energetic levels originated from defective species, essential in the scavenging of reactive oxygen species. Positron spectroscopic studies showed first and second lifetime components ranging between 202–223 ps and 360–373 ps, respectively, revealing the presence of two distinct defective oxygen species, in addition to an increment in the concentration of Ce3+-oxygen vacancy associates as a function of temperature. Therefore, we have successfully synthesized hybrid nanoceria structures with potential multifunctional therapeutic properties to be further evaluated against the COVID-19.Fil: Silva Rosa Rocha, Leandro. Universidade Federal do São Carlos; BrasilFil: Simões, A. Z.. Universidade Estadual Paulista Julio de Mesquita Filho; BrasilFil: Macchi, Carlos Eugenio. Universidad Nacional del Centro de la Provincia de Buenos Aires. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tandil. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires. - Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires; ArgentinaFil: Somoza, Alberto Horacio. Universidad Nacional del Centro de la Provincia de Buenos Aires. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tandil. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires. - Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigaciones en Física e Ingeniería del Centro de la Provincia de Buenos Aires; ArgentinaFil: Giulietti, G.. Universidad Nacional de Mar del Plata; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Longo, E.. Universidade Federal do São Carlos; Brasi