Friction and Molecular Deformation in the Tensile Regime

Recent molecular level studies of energy dissipation in sliding friction have suggested a contribution from adhesive forces. In order to observe this directly, we have constructed a scanning force microscope with decoupled lateral and normal force sensors to simultaneously observe the onset of both friction and attractive forces. Measurements made on self-assembling alkanethiol films with chemically different tail groups show that friction can increase with stronger adhesive intermolecular forces and from the associated tensile deformation and collective motion of the thiol chains

Accurate Method for Determining Adhesion of Cantilever Beams

Using surface micromachined samples, we demonstrate the accurate measurement of cantilever beam adhesion by using test structures which are adhered over long attachment lengths. We show that this configuration has a deep energy well, such that a fracture equilibrium is easily reached. When compared to the commonly used method of determining the shortest attached beam, the present method is much less sensitive to variations in surface topography or to details of capillary drying

Density hardening plasticity and mechanical aging of silica glass under pressure: A Raman spectroscopic study

In addition of a flow, plastic deformation of structural glasses (in particular amorphous silica) is characterized by a permanent densification. Raman spectroscopic estimators are shown to give a full account of the plastic behavior of silica under pressure. While the permanent densification of silica has been widely discussed in terms of amorphous-amorphous transition, from a plasticity point of view, the evolution of the residual densification with the maximum pressure of a pressure cycle can be discussed as a density hardening phenomenon. In the framework of such a mechanical aging effect, we propose that the glass structure could be labelled by the maximum pressure experienced by the glass and that the saturation of densification could be associated with the densest packing of tetrahedra only linked by their vertices

Accurate method for determining adhesion of cantilever beams

Using surface micromachined samples, we demonstrate the accurate measurement of cantilever beam adhesion by using test structures which are adhered over long attachment lengths. We show that this configuration has a deep energy well, such that a fracture equilibrium is easily reached. When compared to the commonly used method of determining the shortest attached beam, the present method is much less sensitive to variations in surface topography or to details of capillary drying

Integrated modeling and testing of a micro hinged structure for sliding friction measurement

This paper summarizes the design, modeling, and initial evaluation of a hinged structure for friction measurement in surface micromachining technology. While the area requirements are small, the present structure allows a much larger velocity and pressure range to be evaluated as compared to comb drive structures. The device consists of a cantilevered driver beam connected to a friction pad through a strategically located hinge. AC excitation of the beam flexure forces axial sliding of the friction pad due to beam foreshortening. Normal force is controlled by DC voltage on wings adjacent to the friction pad. While the achievable slip is small (10--30 nm), it is sufficient to disengage contacting asperities and engage new points of contact, and thus should be representative of frictional processes. Furthermore, the design enables the friction pad contact area to remain relatively constant over the excitation cycle. Computer simulation results are provided to mimic on-going experimental work. Increased friction forces are shown to enhance the size of hysteresis loops relating beam deflection to driver voltage

Electric Field Induced Surface Modification of Au

We discuss the role of localized high electric fields in the modification of Au surfaces with a W probe using the Interfacial Force Microscope. Upon bringing a probe close to a Au surface, we measure both the interfacial force and the field emission current as a function of separation with a constant potential of 100 V between tip and sample. The current initially increases exponentially as the separation decreases. However, at a distance of less than {approximately} 500{angstrom} the current rises sharply as the surface begins to distort and rapidly close the gap. Retraction of the tip before contact is made reveals the formation of a mound on the surface. We propose a simple model, in which the localized high electric field under the tip assists the production of mobile Au adatoms by detachment from surface steps, and a radial field gradient causes a net flux of atoms toward the tip by surface diffusion. These processes give rise to an unstable surface deformation which, if left unchecked, results in a destructive mechanical contact. We discuss our findings with respect to earlier work using voltage pulses in the STM as a means of nanofabrication

Electric field induced surface modification of Au

We discuss the role of localized high electric fields in the modification of Au surfaces with a W probe using the Interfacial Force Microscope. Upon bringing a probe close to a Au surface, we measure both the interfacial force and the field emission current as a function of separation with a constant potential of 100 V between tip and sample. The current initially increases exponentially as the separation decreases. However, at a distance of less than {approximately} 500{angstrom} the current rises sharply as the surface begins to distort and rapidly close the gap. Retraction of the tip before contact is made reveals the formation of a mound on the surface. We propose a simple model, in which the localized high electric field under the tip assists the production of mobile Au adatoms by detachment from surface steps, and a radial field gradient causes a net flux of atoms toward the tip by surface diffusion. These processes give rise to an unstable surface deformation which, if left unchecked, results in a destructive mechanical contact. We discuss our findings with respect to earlier work using voltage pulses in the STM as a means of nanofabrication

Stress-corrosion mechanisms in silicate glasses

The present review is intended to revisit the advances and debates in the comprehension of the mechanisms of subcritical crack propagation in silicate glasses almost a century after its initial developments. Glass has inspired the initial insights of Griffith into the origin of brittleness and the ensuing development of modern fracture mechanics. Yet, through the decades the real nature of the fundamental mechanisms of crack propagation in glass has escaped a clear comprehension which could gather general agreement on subtle problems such as the role of plasticity, the role of the glass composition, the environmental condition at the crack tip and its relation to the complex mechanisms of corrosion and leaching. The different processes are analysed here with a special focus on their relevant space and time scales in order to question their domain of action and their contribution in both the kinetic laws and the energetic aspects.Comment: Invited review article - 34 pages Accepted for publication in J. Phys. D: Appl. Phy

Nanoscale Science, Engineering and Technology Research Directions

This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry