Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis

Fringe analysis is a commonly used method to quantify soot nanostructures. However, the settings of the involved filters and their impact on the results are rarely addressed. In this study, the influence of the three filter parameters as well as two aspects of the image acquisition was assessed experimentally. For the analysis, a carbon black as well as one diesel engine and one gasoline direct injection (GDI) engine soot sample were used. Gaussian low-pass filter standard deviations larger 1.5 yielded only minor differences in fringe metrics. Standard deviations between 2.0 and 3.0 enabled realistic representation of fringes. A linear correlation was found between the white top-hat transformation disk size and all fringe analysis metrics. For realistic nanostructure representation, disk sizes of 5 px and 7 px are most suitable. Threshold values as calculated by Otsu's method generally yielded the best nanostructure representation. Any deviation distorted the extracted fringes and noticeably reduced their total number. Thus, consistent use of Otsu thresholds without alterations is advised. Deviating from the neutral electron microscope focus point by under- and over-focusing resulted in distinctive drops in both fringe lengths and Otsu thresholds. Consistent focusing with the help of fast Fourier transformations of the respective particles is vital for reliable results. The effect of reduced noise levels by repeated averaged images was found to be minor beyond the model of the camera used. The region of interest size correlated linearly with the number of extracted fringes, however, it did not affect the fringe metrics. For statistically reliable analysis, a minimum of 4000 fringes is suggested. The GDI sample exhibited the shortest fringes and the highest tortuosity. For diesel soot and carbon black, similar fringe lengths could be observed. The highest tortuosity was found for GDI soot, followed by diesel soot and carbon black

Nested Case–Control Study of Autoimmune Disease in an Asbestos-Exposed Population

OBJECTIVE: To explore the potential association between asbestos exposure and risk of autoimmune disease, we conducted a case–control study among a cohort of 7,307 current and former residents of Libby, Montana, a community with historical occupational and environmental exposure to asbestos-contaminated vermiculite. METHODS: Cases were defined as those who reported having one of three systemic autoimmune diseases (SAIDs): systemic lupus erythematosus, scleroderma, or rheumatoid arthritis (RA). Controls were randomly selected at a 3:1 ratio from among the remaining 6,813 screening participants using frequency-matched age and sex groupings. RESULTS: The odds ratios (ORs) and 95% confidence intervals (CIs) for SAIDs among those ≥ 65 years of age who had worked for the vermiculite mining company were 2.14 (95% CI, 0.90–5.10) for all SAIDs and 3.23 (95% CI, 1.31–7.96) for RA. In this age group, exposure to asbestos while in the military was also an independent risk factor, resulting in a tripling in risk. Other measures of occupational exposure to vermiculite indicated 54% and 65% increased risk for SAIDs and RA, respectively. Those who had reported frequent contact with vermiculite through various exposure pathways also demonstrated elevated risk for SAIDs and RA. We found increasing risk estimates for SAIDs with increasing numbers of reported vermiculite exposure pathways (p < 0.001). CONCLUSION: These preliminary findings support the hypothesis that asbestos exposure is associated with autoimmune disease. Refined measurements of asbestos exposure and SAID status among this cohort will help to further clarify the relationship between these variables

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?

Formation of soot is a known phenomenon for diesel engines, however, only recently emerged for gasoline engines with the introduction of direct injection systems. Soot-in-oil samples from a three-cylinder turbo-charged gasoline direct injection (GDI) engine have been analysed. The samples were collected from the oil sump after periods of use in predominantly urban driving conditions with start-stop mode activated. Thermogravimetric analysis (TGA) was performed to measure the soot content in the drained oils. Soot deposition rates were similar to previously reported rates for diesel engines, i.e. 1 wt% per 15,000 km, thus indicating a similar importance. Morphology was assessed by transmission electron microscopy (TEM). Images showed fractal agglomerates comprising multiple primary particles with characteristic core-shell nanostructure. Furthermore, large amorphous structures were observed. Primary particle sizes ranged from 12 to 55 nm, with a mean diameter of 30 nm and mode at 31 nm. Particle agglomerates were measured by nanoparticle tracking analysis (NTA). The agglomerates were found to range between 42 and 475 nm, with a mean size of 132 nm and mode at 100 nm. The distribution was shifted towards larger sizes with a minor concentration of very large agglomerates observed around 382 nm. While deposition rate and agglomerate morphology were similar to diesel engines, distinctive amorphous carbon and smaller particles were observed. Hence, existing knowledge for diesel applications might not be directly transferrable

Field-free deterministic ultra fast creation of skyrmions by spin orbit torques

Magnetic skyrmions are currently the most promising option to realize current-driven magnetic shift registers. A variety of concepts to create skyrmions were proposed and demonstrated. However, none of the reported experiments show controlled creation of single skyrmions using integrated designs. Here, we demonstrate that skyrmions can be generated deterministically on subnanosecond timescales in magnetic racetracks at artificial or natural defects using spin orbit torque (SOT) pulses. The mechanism is largely similar to SOT-induced switching of uniformly magnetized elements, but due to the effect of the Dzyaloshinskii-Moriya interaction (DMI), external fields are not required. Our observations provide a simple and reliable means for skyrmion writing that can be readily integrated into racetrack devices

The Influence of Corporate Front-Group Stealth Campaigns

This research examined corporate front-group stealth campaigns. An experiment was conducted to examine the influence of front-group stealth campaigns on a variety of measures. It was anticipated that corporate front-group stealth campaigns, which feature names that mask the true interests of sponsors, positively affect public opinion, unless they are exposed as intentionally misleading, in which case they boomerang against sponsors. The experiment examined the potential of the inoculation strategy to preempt the influence of corporate front-group stealth campaigns. The pattern of results supported all of these expectations. Front-group stealth campaigns proved to be effective, at least in the short term. Front-group stealth campaigns eroded public attitudes toward the issue in question and boosted perceptions of the front group, but not the corporate sponsor. However, when front-group stealth campaigns were subsequently exposed, positive effects dissipated and perceptions of corporate sponsors boomeranged. Results revealed that inoculation can protect against the influence of front-group stealth campaigns.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline

Indirect excitation of ultrafast demagnetization

Does the excitation of ultrafast magnetization require direct interaction between the photons of the optical pump pulse and the magnetic layer? Here, we demonstrate unambiguously that this is not the case. For this we have studied the magnetization dynamics of a ferromagnetic cobalt/palladium multilayer capped by an IR-opaque aluminum layer. Upon excitation with an intense femtosecond-short IR laser pulse, the film exhibits the classical ultrafast demagnetization phenomenon although only a negligible number of IR photons penetrate the aluminum layer. In comparison with an uncapped cobalt/palladium reference film, the initial demagnetization of the capped film occurs with a delayed onset and at a slower rate. Both observations are qualitatively in line with energy transport from the aluminum layer into the underlying magnetic film by the excited, hot electrons of the aluminum film. Our data thus confirm recent theoretical predictions

Can Inoculation Withstand Multiple Attacks?: An Examination of the Effectiveness of the Inoculation Strategy Compared to the Supportive and Restoration Strategies

This investigation introduced multiple competitive attacks in order to assess the effectiveness of inoculation treatments in protecting established attitudes in a natural setting. A four-phase experiment was conducted involving 433 participants. The results revealed that the effectiveness of refutational inoculation messages dissipated some in the face of an additional attack. Still, refutational inoculation messages proved to be more effective than supportive, restoration, and control (no message) conditions in protecting established attitudes in the face of multiple attacks. The content of an additional attack (the same as the first attack or different) did not affect the capacity of inoculation refutational messages to confer resistance to competitive attacks.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline

Razine antinuklearnoga antitijela i reumatoidnoga faktora u radnika izloženih silicijevu dioksidu

A lot of workers in industries such as foundry, stonecutting, and sandblasting are exposed to higher than permissible levels of crystalline silica. Various alterations in humoral immune function have been reported in silicosis patients and workers exposed to silica dust. The aim of this study was to measure antinuclear antibody (ANA) and rheumatoid factor (RF) levels in foundry workers exposed to silica and to compare them with a control group without such exposure. ANA and RF were measured in 78 exposed and 73 non-exposed workers, and standard statistical methods were used to compare them. The two groups did not significantly differ in age and smoking. Mean work duration of the exposed and non-exposed workers was (14.9±4.72) years and (12.41±6.3) years, respectively. Ten exposed workers had silicosis. ANA was negative in all workers in either group. Its mean titer did not differ significantly between the exposed and control workers [(0.39±0.15) IU mL-1 vs. (0.36±0.17) IU mL-1, respectively]. RF was positive in two workers of each group. Other studies have reported an increase in ANA and RF associated with exposure to silica dust and silicosis. In contrast, our study suggests that exposure to silica dust does not increase the level of ANA and RF in exposed workers.Mnogi su radnici izloženi kristalnomu silicijevu dioksidu u razinama iznad dopuštenih. U oboljelih od silikoze i radnika izloženih prašinama koje sadržavaju silicijev dioksid zamijećen je niz oštećenja humoralne obrane. Budući da su radnici u ljevaonicama izloženi visokim razinama kristalnoga silicijeva dioksida, u njih bismo očekivali ovakve humoralne poremećaje. Cilj je ovog ispitivanja bio izmjeriti i usporediti razine antinuklearnih protutijela (ANA) i reumatoidnoga faktora (RF) u krvi radnika u ljevaonici izloženih silicijevu dioksidu i neizložene kontrolne skupine. ANA i RF izmjereni su u 78 izloženih radnika i 73 neizložena radnika te su uspoređeni s pomoću standardnih statističkih metoda. Dvije se skupine nisu bitno razlikovale u broju pušača i u dobi. Prosječna duljina radnog vijeka izloženih radnika bila je (14,9±4,72) godine, a neizloženih (12,41±6,3) godine. Deset izloženih radnika imalo je silikozu. Nalazi ANA bili su negativni u obje skupine radnika. Srednja vrijednost titra ANA iznosila je (0,39±0,15) IU mL-1 u izloženih ispitanika, a (0,36±0,17) IU mL-1 u kontrola, što je statistički zanemariva razlika. Nalaz RF-a bio je pozitivan u dva izložena te dva kontrolna radnika. Naše ispitivanje upućuje na to da prašine silicijeva dioksida ne uzrokuju porast razina ANA i RF-a u izloženih radnika