990 research outputs found

    Fatigue resistance of new and used nickel-titanium rotary instruments: a comparative study

    Get PDF
    Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones

    GaAs hetero-epitaxial layers grown by MOVPE on exactly-oriented and off-cut (1 1 1)Si: Lattice tilt, mosaicity and defects content

    Get PDF
    Integration of III-V devices with Si-photonics and fabrication of monolithic III-V/Si tandem solar cells require the heteroepitaxy of III-V compounds on Si. We report on the lattice tilt, mosaicity and defects content of relaxed GaAs grown by MOVPE on exactly-oriented and 4°-offcut (1 1 1)Si. Thin GaAs single-layers grown at 400 °C and annealed at 700 °C show ∼ 3×10^8 cm−2 density of surface pinholes. Double-layer samples were obtained by GaAs overgrowth at 700 °C. GaAs epilayers are tilted by (0.05–0.14)° with respect to Si. Rotational twins were observed in X-ray diffraction (XRD) pole figures: the most abundant ones originate from 60°-rotation of GaAs around the [1 ̄1 ̄1 ̄] growth direction and are identified as micro-twins along the GaAs/Si hetero-interface. Twins obtained by rotations around the [1 ̄1 ̄1], [11 ̄1 ̄], and [1 ̄11 ̄] directions or by combined rotations around the growth direction and one of the former, were also observed. The GaAs mosaicity and block size were studied through high-resolution XRD intensity mapping: for single-layer samples crystal blocks are ascribed to 3–5 nm thin micro-twins, whose size does not change upon annealing. In double-layer samples thicker (32–35 nm) micro-twins occur. GaAs samples grown on offcut (1 1 1)Si show less rotational twins but a reduced mosaic block size with respect to exactly-oriented Si

    Role of the flat-designed surface in improving the cyclic fatigue resistance of endodontic NiTi rotary instruments

    Get PDF
    The aim of this study was to investigate the role of the flat-designed surface in improving the resistance to cyclic fatigue by comparing heat-treated F-One (Fanta Dental, Shanghai, China) nickel-titanium (NiTi) rotary instruments and similar prototypes, differing only by the absence of the flat side. The null hypothesis was that there were no differences between the two tested instruments in terms of cyclic fatigue lifespan. A total of 40 new NiTi instruments (20 F-One and 20 prototypes) were tested in the present study. The instruments were rotated with the same speed (500 rpm) and torque (2 N) using an endodontic motor (Elements Motor, Kerr, Orange, CA, USA) in the same stainless steel, artificial canal (90° angle of curvature and 5 mm radius). A Wilcoxon-Mann-Whitney test was performed to assess the differences in terms of time to fracture and the length of the fractured segment between the flat- and non-flat-sided instruments. Significance was set at p = 0.05. The differences in terms of time to fracture between non-flat and flat were statistically significant (p < 0.001). In addition, the differences in terms of fractured segment length were statistically significant (p = 0.034). The results of this study highlight the importance of flat-sided design in increasing the cyclic fatigue lifespan of NiTi rotary instruments

    The influence of a new clinical motion for endodontic instruments on the incidence of postoperative pain

    Get PDF
    Previous studies showed that motor motions play an important role in determining apical extrusion of debris. Therefore a new clinical motion (MIMERACI) has been proposed. The basic idea is to progress slowly (1mm advancement), and after each 1mm, to remove the instrument from the canal, clean flutes and irrigate. The aim of the study was to prove whether the clinical use of MIMERACI technique would influence or not postoperative pain.MATERIALS AND METHODS: 100 teeth requesting endodontic treatment were selected for the study and divided into two similar groups based on anatomy, pre-operative symptoms and vitality, presence or absence of periapical lesion. All teeth were shaped, cleaned and obturated by the same operator, using the same NiTi instruments. The only difference between the two groups was the instrumentation technique: tradional (group A) vs MIMERACI (group B). Assessment of postoperative pain was performed 3 days after treatment. Presence, absence and degree of pain were recorded with a visual analogue scale (VAS), validated in previous studies. Collected data statistically analyzed using one-way ANOVA post hoc Tukey test. RESULTS: For VAS pain scores MIMERACI technique showed significantly better results than group A (p=0,031). Overall, both incidence and intensity of symptoms were significantly lower. Flare ups occurred in 3 patients, but none treated with the MIMERACI Technique. CONCLUSIONS: Since extruded debris can elicit more postoperative pain, results obtained by using MIMERACI technique are probably due to many factors: better mechanical removal and less production of debris and more efficient irrigation during instrumentation

    Oral lichen planus in children: an italian case series with literature review

    Get PDF
    Objectives. Oral lichen planus is a chronic mucous inflammatory disease. The prevalence in adults ranges between 0.5% and 2%, whereas children are involved just in 0.03% of cases. The purpose of this paper is to review the current literature and to present six Italian cases of Oral Lichen Planus in children (OLPc). Methods. We reported the data about a retrospective study on 6 cases of oral lichen planus in children. A detailed history was retrieved from clinical notes of each patient. Patients younger than 18 years old were enrolled in the study. All of them had the OLP diagnosis confirmed by clinical findings, history, and histopathology. Results. The family history for lichen planus was negative in all patients, the mean age was 11 years (range 6-14); there was no cutaneous involvement, whereas 2 patients had concomitant autoimmune diseases. Topical corticosteroids was the only treatment used in 66.67% of patients with good response in a mean time of 4.75 weeks. Conclusions. The rarity of OLPc may be due to the lack of symptoms that prevents the patient or his family from noticing the presence of the condition, but also to misdiagnosis of the dentist or the paediatrician. Thus, though LP in children is uncommon and oral mucosal involvement extremely rare, clinicians should be aware of its existence and management, and this diagnosis should be taken into account in children presenting oral white lesions

    Changes of radiographic trabecular bone density and peri-implant marginal bone vertical dimensions around non-submerged dental implants with a laser-microtextured collar after 5 years of functional loading

    Get PDF
    Objectives: The progressive peri-implant bone remodeling caused by dynamic cycles of microdamage may change peri-implant bone characteristics and volume after the functional loading. This prospective study was designed to evaluate the radiographic trabecular bone density and peri-implant vertical dimensional changes around the non submerged dental implant with a laser-microtextured collar (NSLI)s after 5 years of functional loading. Methods: Digital periapical radiographs of 58 NSLIs supported fixed single crowns and fixed partial dentures in 26 patients (14 men, mean age of 52 ± 3.8 years) were used for comparative evaluation between the implant placement [Baseline (BSL)], the definitive Crowns Delivery (CD) and the 5 years post-functional loading examination (T5). Regions of interest (ROI) were taken into consideration for the measurement of mean gray levels, standard deviation, and variation coefficient. The texture parameters, such as contrast, correlation, angular second moment and entropy, were investigated by using the software ImageJ (v.1.50i), by means of the Gray-level Co-occurrence Matrix (GLCM) Texture Tool plugin. Vertical Periimplant Marginal Bone Level (VPMBL) was assessed at the mesial and the distal sides of each implant by subtracting the measure at BSL from the measure at T5 by means of dedicate software (VixWin Platinum Imaging Software). Mixed regression models were adopted to analyze data. The possible effects of some variables, such as the use of provisional denture, location, crown/implant ratio, type of prosthetic design (single or splinted), on radiographic dimensional vertical changes, gray levels and texture analysis variables were also evaluated. Results: From BSL to T5, mesial and distal VPMBL showed a statistically significant gain of 0.9 ±0.5, and 0.10 mm ±0.6, respectively (P<0.05). From CD to T5, mean gray levels increased from 94.4±26.8) to 111.8±27.1 (P<0.05), while the coefficient of variation decreased from 0.08±0,03 to 0.05±0.04) (P<0.05). Variables showed no statistically significant correlation with texture parameters (P > 0.05). Conclusion: NSLIs showed an increase in radiographic vertical peri-implant marginal bone levels and bone density up to 5 years of loading

    Laser microgrooved vs. machined healing abutment disconnection/reconnection: a comparative clinical, radiographical and biochemical study with split-mouth design

    Get PDF
    Background: Repeated removal and replacement of healing abutments result in frequent injuries to the soft tissues.Purpose: The purpose of this study was to evaluate the effect of disconnection/reconnection of laser microgrooved vs. machined healing and prosthetic abutments on clinical periodontal parameters, marginal bone levels, and proinflammatory cytokine levels around dental implants.Material and methods: Twenty-four patients each received 2 implants with one-stage protocol in a split-mouth design on the same jaw. In each patient, one healing and prosthetic abutments with a laser microgrooved surface (LMS group) and one healing and prosthetic abutments with machined surface (MS group) were used. Four months following implant placement (T0), the healing abutments were disconnnected and reconnected three times to carry out the impression procedures and metal framework try-in. Four weeks later (T1), definitive prosthetic abutments were installated with screw-retained crowns. Modified plaque index (mPI), modified gingival index (mGI) bleeding on probing (BOP), and probing depth (PD) were recorded at T0 and T1. At the same time points, samples for immunological analyses were taken from the sulcus around each implant. Peri-implant crevicular fluid (PICF) samples were analyzed for interleukin-1beta (IL-1 beta), interleukin-6 (IL-6), and tumor necrosis factor (TNF)-alpha levels using the ELISA kit.Results: At T0 and T1, mPI and mGI showed no statistical difference between the two groups, while higher PD and BoP values were noted for the MS group (P < 0.05). The mean PICF volume and mean concentrations of IL-1 beta, IL-6, and (TNF)-alpha in the LMS group were statistically less than those in the MS group (P < 0.05). In addition, comparison of IL-6 and IL-1 beta mean concentrations at T0 and T1 in the MS group showed a statistically significant increase (p < 0.05) over time, which was not noted for the LMS.Conclusion: Disconnection/reconnection of healing and prosthetic abutments with a laser-microgrooved surface resulted in less inflammatory molecular response compared with conventional machined ones

    Peri-implant marginal bone changes and soft tissue conditions around single implants with laser-microgrooved collar placed in regenerated extraction sockets and in native bone: 2-year results of RCT

    Get PDF
    The aim of present study was to compare peri-implant marginal bone changes and soft tissues conditions around single implants placed in alveolar sockets regenerated with porcine xenograft and collagen membrane or non-regenerated native bone. Forty patients who required single tooth extraction and single implant placement in premolar/molar area, were enrolled in this study. Subjects were randomly assigned to the control group (S; extraction sockets spontaneously healed) or to the test group (R; extraction sockets grafted with porcine-derived bone and covered with collagen membrane). Six months after extractions, single tapered implants with laser-microgrooved collars were inserted. For each implant, radiographic MBL and clinical parameters were evaluated during 2 years of function. At the 24-month follow-up, a survival rate of 100% was reported for all implants. For the S group, the mean marginal bone loss (MBL) was 0.118 ± 0.07 mm while for the R group the mean MBL was 0.131± 0.03 mm. No statistically significant differences were reported among groups (P >0.05). Between the two groups, no statistically significant differences were found also for plaque index, bleeding on probing, probing depth and gingival recession. At the 24-month follow-up, results showed that implants with laser-microgrooved collar surface placed in regenerated extraction sockets and in native bone did not performed differently with respect to implant survival, MBL and peri-implant soft tissue parameters
    • …
    corecore