454 research outputs found
Adsorption from Solution
A major problem of the thermodynamic theory of adsorption
at the solid/liquid interface is concerned with the definition of
the heterogeneous surface in terms of mathematically treatable
model. The paper gives a review of the theoretical approaches
applied to studies of adsorption from concentrated and diluted
binary mixtures.
Experimental work has enjoyed much success since the
uniform surface, graphitized carbon blacks became available.
Results are described and discussed of measurements of heats
of immersion on such surfaces
Adsorption from Solution
A major problem of the thermodynamic theory of adsorption
at the solid/liquid interface is concerned with the definition of
the heterogeneous surface in terms of mathematically treatable
model. The paper gives a review of the theoretical approaches
applied to studies of adsorption from concentrated and diluted
binary mixtures.
Experimental work has enjoyed much success since the
uniform surface, graphitized carbon blacks became available.
Results are described and discussed of measurements of heats
of immersion on such surfaces
A Study of the Mechanism of Micropore Filling. I. Molecular Sieve Effects
The adsorptive properties of two microporous carbons and a
microporous silica have been investigated and compared using
argon and benzene. The micropore volumes determined using the
Theory for Volume filling of Micropores (TVFM) agreed to within
40/o of the total micropore volumes determined from the a8 method
of pore analysis. Adsorption data of argon at 77 °K and benzene
at 298 °K on the microporous carbons were interpreted in terms
of the Dubinin-Astakhov and Dubinin-Radushkevich equations,
and Weibull and Gaussian distributions of the adsorption free
energy with pore volume, respectively. The Weibull distribution
was found to apply better than the Gaussian distribution, although
variations from linear D-A plots occurred. The adsorption data on
the silica sample were best interpreted as a two-term D-R equation.
Plots of the distribution of adsorption energy with pore volume of
the silica sample for each term of the D-R equation and their
effective contribution to the cumulative distribution curve gave
conclusive evidence of the ordering of the adsorption process
within micropores of varying dimensions
Production of large-particle-size monodisperse latexes
The research program achieved two objectives: (1) it has refined and extended the experimental techniques for preparing monodisperse latexes in quantity on the ground up to a particle diameter of 10 microns; and (2) it has demonstrated that a microgravity environment can be used to grow monodisperse latexes to larger sizes, where the limitations in size have yet to be defined. The experimental development of the monodisperse latex reactor (MLR) and the seeded emulsion polymerizations carried out in the laboratory prototype of the flight hardware, as a function of the operational parameters is discussed. The emphasis is directed towards the measurement, interpretation, and modeling of the kinetics of seeded emulsion polymerization and successive seeded emulsion polymerization. The recipe development of seeded emulsion polymerization as a function of particle size is discussed. The equilibrium swelling of latex particles with monomers was investigated both theoretically and experimentally. Extensive studies are reported on both the type and concentration of initiators, surfactants, and inhibitors, which eventually led to the development of the flight recipes. The experimental results of the flight experiments are discussed, as well as the experimental development of inhibition of seeded emulsion polymerization in terms of time of inhibition and the effect of inhibitors on the kinetics of polymerization
Computational Fluid Dynamics of Reacting Flows at Surfaces: Methodologies and Applications
This review presents the numerical algorithms and speed-up strategies developed to couple continuum macroscopic simulations and detailed microkinetic models in the context of multiscale approaches to chemical reactions engineering. CFD simulations and hierarchical approaches are discussed both for fixed and fluidized systems. The foundations of the methodologies are reviewed together with specific examples to show the applicability of the methods. These concepts play a pivotal role to enable the first-principles multiscale approach to systems of technological relevance
Sorption of Water and Polar-Nonpolar Organic Vapors on Microporous Chromia
High surface area, narrow particle size distribution chromic;t
was investigated for its microporosity. Adsorption studies with
argon, water vapor, methanol, isopropanol, butane, isobutane, neopentane,
and heptane indicated alternative approaches to the
determination of micropore volume
Project management information systems (Pmiss): A statistical-based analysis for the evaluation of software packages features
Project Managers (PMs) working in competitive markets are finding Project Management Information Systems (PMISs) useful for planning, organizing and controlling projects of varying complexity. A wide variety of PMIS software is available, suitable for projects differing in scope and user needs. This paper identifies the most useful features found in PMISs. An extensive literature review and analysis of commercial software is made to identify the main features of PMISs. After-wards, the list is reduced by a panel of project management experts, and a statistical analysis is performed on data acquired by means of two different surveys. The relative importance of listed features is properly computed, and the interactions between the respondent’s profiles and PMIS features are also investigated by cluster and respondents’ analyses. The paper provides information for researchers and practitioners interested in PMISs packages and their applications. Furthermore, the analyses may help practitioners when choosing a PMIS, and also for developers of PMISs software in understanding user needs
Economic and Environmental Assessment of Biomass Power Plants in Southern Italy
In 2019, Europe adopted the New Green Deal as a strategic plan to become a competitive, resource-efficient, and driven economy by reducing its gas emissions and carbon footprint. Due the COVID-19 pandemic, this strategic plan was recently updated to expedite the green transition of European industries. Therefore, the present paper deals with the problem of deciding an appropriate size for a biomass plant that directly produces electric energy by means of two different conversion processes: combustion and gasification. After an initial estimation of the energy potential in western Sicily, GIS data of biomass growth were used to identify the appropriate size for the power plants under investigation. The economic feasibility of biomass utilization was evaluated over a capacity range of 10 to 30 MW, considering total capital investments, revenues from energy sales, and total operating costs. Moreover, the effect of variations on incentive prices was analyzed by means of a sensitivity analysis. Comparing the different plant solutions considered, the environmental sustainability was also analyzed using the life cycle assessment (LCA) approach. The results showed that the combustion solution had a higher profitability and a lower environmental impact for each plant size. The obtained results also demonstrated that providing power from residual biomass in small agricultural communities would significantly reduce their environmental impacts while improving the economic feasibility of their waste management practices
Occupational health and safety issues in human-robot collaboration: State of the art and open challenges
Human-Robot Collaboration (HRC) refers to the interaction of workers and robots in a shared workspace. Owing to the integration of the industrial automation strengths with the inimitable cognitive capabilities of humans, HRC is paramount to move towards advanced and sustainable production systems. Although the overall safety of collaborative robotics has increased over time, further research efforts are needed to allow humans to operate alongside robots, with awareness and trust. Numerous safety concerns are open, and either new or enhanced
technical, procedural and organizational measures have to be investigated to design and implement inherently safe and ergonomic automation solutions, aligning the systems performance and the human safety. Therefore, a bibliometric analysis and a literature review are carried out in the present paper to provide a comprehensive overview of Occupational Health and Safety (OHS) issues in HRC. As a result, the most researched topics and application areas, and the possible future lines of research are identified. Reviewed articles stress the central role
played by humans during collaboration, underlining the need to integrate the human factor in the hazard analysis and risk assessment. Human-centered design and cognitive engineering principles also require further investigations to increase the worker acceptance and trust during collaboration. Deepened studies are compulsory in the healthcare sector, to investigate the social and ethical implications of HRC. Whatever the application context is, the implementation of more and more advanced technologies is fundamental to overcome the current HRC safety concerns, designing low-risk HRC systems while ensuring the system productivity
The first products made in space: Monodisperse latex particles
The preparation of large particle size 3 to 30 micrometer monodisperse latexes in space confirmed that original rationale unequivocally. The flight polymerizations formed negligible amounts of coagulum as compared to increasing amounts for the ground-based polymerizations. The number of offsize large particles in the flight latexes was smaller than in the ground-based latexes. The particle size distribution broadened and more larger offsize particles were formed when the polymerizations of the partially converted STS-4 latexes were completed on Earth. Polymerization in space also showed other unanticipated advantages. The flight latexes had narrower particle size distributions than the ground-based latexes. The particles of the flight latexes were more perfect spheres than those of the ground-based latexes. The superior uniformity of the flight latexes was confirmed by the National Bureau of Standards acceptance of the 10 micrometer STS-6 latex and the 30 micrometer STS-11 latexes as Standard Reference Materials, the first products made in space for sale on Earth. The polymerization rates in space were the same as those on Earth within experimental error. Further development of the ground-based polymerization recipes gave monodisperse particles as large as 100 micrometer with tolerable levels of coagulum, but their uniformity was significantly poorer than the flight latexes. Careful control of the polymerization parameters gave uniform nonspherical particles: symmetrical and asymmetrical doublets, ellipsoids, egg-shaped, ice cream cone-shaped, and popcorn-shaped particles
- …