4-Hydr­oxy-3-[(2E)-3-(3,4,5-trimethoxy­phen­yl)prop-2-eno­yl]-2H-chromen-2-one

A new chalcone of the coumarin, C21H18O7, containing an annulated α-pyrone ring, was obtained by condensation of the borate complex of ac­yl(hydr­oxy)coumarin with trimethoxy­benzaldehyde. The structure exhibits intra­molecular hydrogen bonding between the hydroxyl oxygen and the ketonic oxygen in the coumarin group. The bicyclic coumarin fragment and the benzene ring form a dihedral angle of 17.1 (4)°. The crystal packing involves dimers inter­connected by C—H⋯O hydrogen bonding

Alleviation of Associated Drought and Salinity Stress’ Detrimental Impacts on an Eggplant Cultivar (‘Bonica F1’) by Adding Biochar

To investigate the impact of biochar on eggplant growth, physiology, and yield parameters under separate and associated drought and salt stress, a pot experiment was carried out. An eggplant variety (‘Bonica F1’) was exposed to one NaCl concentration (S1 = 300 mM), three irrigation regimes (FI: full irrigation; DI: deficit irrigation; ARD: alternate root-zone drying irrigation), and one dose of biochar (B1 = 6% by weight). Our findings demonstrated that associated drought and salt stress had a greater negative impact on ‘Bonica F1’ performance in comparison to single drought or salt stress. Whereas, adding biochar to the soil improved the ability of ‘Bonica F1’ to alleviate the single and associated effects of salt and drought stress. Moreover, in comparison to DI under salinity, biochar addition in ARD significantly increased plant height, aerial biomass, fruit number per plant, and mean fresh weight per fruit by 18.4%, 39.7%, 37.5%, and 36.3%, respectively. Furthermore, under limited and saline irrigation, photosynthetic rate (An), transpiration rate (E), and stomatal conductance (gs) declined. In addition, the interaction between ARD and biochar effectively restored the equilibrium between the plant chemical signal (ABA) and hydraulic signal (leaf water potential). As a result, mainly under salt stress, with ARD treatment, intrinsic water use efficiency (WUEi) and yield traits were much higher than those in DI. Overall, biochar in combination with ARD could be an efficient approach for preserving crop productivity

Single and Associated Effects of Drought and Heat Stresses on Physiological, Biochemical and Antioxidant Machinery of Four Eggplant Cultivars

The impact of heat and drought stresses, either individually or combined, on physiological and biochemical parameters of four eggplant varieties (Solanum melongena L.) was investigated. The results showed that associated stress generated the highest increment in proline content, MDA concentration, and H2O2 accumulation and generated the lowest increment in RWC. In addition, ‘Bonica’ and ‘Galine’ exhibited higher starch accumulation and lower electrolyte leakage (EL) under combined stress. Moreover, drought and heat stresses applied individually contributed to a substantial decline in Chla, Chlb, total Chl, Chla/b, and carotenoids (p > 0.05) in ‘Adriatica’ and ‘Black Beauty’. The decreasing level of pigments was more substantial under associated drought and heat stresses. The simultaneous application of drought and heat stresses reduced PSII efficiency (Fv/Fm), quantum yield (ΦPSII), and photochemical efficiency (qp) and boosted non-photochemical quenching (NPQ) levels. However, the change recorded in the chlorophyll fluorescence parameters was less pronounced in ‘Bonica’ and ‘Galine’. In addition, the gas exchange parameters, transpiration rate (E), CO2 assimilation rate (A), and net photosynthesis (Pn) were decreased in all varieties under all stress conditions. However, the reduction was more pronounced in ‘Adriatica’ and ‘Black Beauty’. Under associated stress, antioxidant enzymes, SOD, APX, CAT, and GR exhibited a significant increment in all eggplant cultivars. However, the rising was more elevated in ‘Bonica’ and ‘Galine’ (higher than threefold increase) than in ‘Adriatica’ and ‘Black Beauty’ (less than twofold increase). Furthermore, ‘Bonica’ and ‘Galine’ displayed higher non-enzyme scavenging activity (AsA and GSH) compared to ‘Adriatica’ and ‘Black Beauty’ under associated stress. Under stressful conditions, nutrient uptake was affected in all eggplant cultivars; however, the root, stem, and leaf N, P, and K contents, in ‘Adriatica’ and ‘Black Beauty’ were lower than in ‘Bonica’ and ‘Galine’, thereby showing less capacity in accumulating nutrients. The coexistence of drought and heat stresses caused more damage on eggplant varieties than the single appearance of drought or heat stress separately. ‘Bonica’ and ‘Galine’ showed better distinguished performance compared to ‘Adriatica’ and ‘Black Beauty’. The superiority of ‘Bonica’ and ‘Galine’ in terms of tolerance to heat and drought stresses was induced by more effective antioxidant scavenging potential, enhanced osmolyte piling-up, and prominent ability in keeping higher photosynthetic efficiency and nutrient equilibrium compared with ‘Adriatica’ and ‘Black Beauty’

Ecological Synthesis of CuO Nanoparticles Using <i>Punica granatum</i> L. Peel Extract for the Retention of Methyl Green

The aqueous extract from the bark of Punica granatum L. was invested to generate CuO nanoparticles from CuSO4 using a green, economical, ecological, and clean method. The synthesized nanoparticles were characterized and were successfully used as adsorbents for methyl green retention of an absorptive capacity amounting to 28.7 mg g−1. Methyl green equilibrium adsorption data were correlated to the Langmuir model following the pseudo-second order kinetics model. This study clearly corroborates that copper nanoparticles exhibit a high potential for use in wastewater treatment

Ecological Synthesis of CuO Nanoparticles Using Punica granatum L. Peel Extract for the Retention of Methyl Green

The aqueous extract from the bark of Punica granatum L. was invested to generate CuO nanoparticles from CuSO4 using a green, economical, ecological, and clean method. The synthesized nanoparticles were characterized and were successfully used as adsorbents for methyl green retention of an absorptive capacity amounting to 28.7 mg g&minus;1. Methyl green equilibrium adsorption data were correlated to the Langmuir model following the pseudo-second order kinetics model. This study clearly corroborates that copper nanoparticles exhibit a high potential for use in wastewater treatment

Salt stress induced changes in photosynthesis and metabolic profiles of one tolerant (‘Bonica’) and one sensitive (‘Black Beauty’) eggplant cultivars (Solanum melongena l.)

The impact of salinity on the physiological and biochemical parameters of tolerant ('Bonica') and susceptible ('Black Beauty') eggplant varieties (Solanum melongena L.) was determined. The results revealed that the increase in salinity contributes to a significant decline in net photosynthesis (A(n)) in both varieties; however, at the highest salt concentration (160 mM NaCl), the decrease in photorespiration (R-l) was less pronounced in the tolerant cultivar 'Bonica'. Stomatal conductance (g(s)) was significantly reduced in 'Black Beauty' following exposure to 40 mM NaCl. However, g(s) of 'Bonica' was only substantially reduced at the highest level of NaCl (160 mM). In addition, a significant decrease in Chla, Chlb, total Chl, Chla/b and carotenoids (p > 0.05) was found in 'Black Beauty', and soluble carbohydrates accumulation and electrolyte leakage (EL) were more pronounced in 'Black Beauty' than in 'Bonica'. The total phenols increase in 'Bonica' was 65% higher than in 'Black Beauty'. In 'Bonica', the roots displayed the highest enzyme scavenging activity compared to the leaves. Salt stress contributes to a significant augmentation of root catalase and guaiacol peroxidase activities. In 'Bonica', the Na concentration was higher in roots than in leaves, whereas in 'Black Beauty', the leaves accumulated more Na. Salt stress significantly boosted the Na/K ratio in 'Black Beauty', while no significant change occurred in 'Bonica'. ACC deaminase activity was significantly higher in 'Bonica' than in 'Black Beauty'

Biodegradable composite films based on mucilage from Opuntia ficus-indica (Cactaceae): Microstructural, functional and thermal properties

International audienceThis study evaluated the feasibility of using cactus mucilage (CM) to elaborate biobased composite films blended with styrene-butadiene rubber latex (SBL). The CM was extracted and precipitated with ethanol (CMET) and isopropanol (CMIS). Mucilage-based films were formulated using three levels of mucilage (4, 6, and 8 wt%). The microstructure, thickness, moisture content, density, water contact angle, water vapor permeability, film solubility, thermal stability, and toughness of mucilage films blended with SBL (SBL/CMET and SBL/CMIS) were measured. The properties of mucilage-based films varied systematically, depending on the concentration of mucilage. The addition of SBL to CM film produces compatible, hydrophobic, flexible, and stiffer films with low moisture contents and good barrier properties. The mucilage film incorporated with 6 wt% CMET and CMIS reached the highest Young's modulus of 1512 ± 21 and 1988 ± 55 MPa, respectively. The DSC of produced films reveals that the Tg of SBL/CMIS is lower than that of SBL/CMIS. The synthesized films were structurally stable at high temperatures. The biodegradability of the composite films buried in the ground shows that the produced films are 100 % biodegradable after 40 days. Thus, CM blended with SBL can benefit specific applications, especially food packaging

Optimization of the Preparation of Activated Carbon from Prickly Pear Seed Cake for the Removal of Lead and Cadmium Ions from Aqueous Solution

In this study, we evaluated the use of prickly pear seed cake, a by-product of prickly pear seed oil extraction, as a new precursor for producing activated carbon by phosphoric acid activation, and the obtained carbon’s capacity for heavy metal removal from aqueous solution. Response surface methodology based on the full factorial design at two levels (24) was developed to reduce the number of experiments and reach optimal preparation conditions for the removal of cadmium and lead ions from aqueous solutions. Design Expert 11.1.2.0 Trial software was used for generating the statistical experimental design and analyzing the observed data. Factors influencing the activation process, such as carbonization temperature, activation temperature, activation time, and impregnation ratio, were studied. Responses were studied in depth with an analysis of variance to estimate their significance. Each response was outlined by a first-order regression equation demonstrating satisfactory correspondence between the predicted and experimental results as the adjusted coefficients of correlation. Based on the statistical data, the best conditions for the removal of heavy metals from aqueous solution by the obtained activated carbon were indicated. The maximum iodine number and methylene blue index were 2527.3 mg g−1 and 396.5 mg g−1, respectively, using activated carbon obtained at the following conditions: Tc = 500 °C, Ta = 500 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of two hours. The maximum adsorption reached 170.2 mg g−1 and 158.4 mg g−1 for Cd2+ and Pb2+, respectively, using activated carbon obtained at the following conditions: Tc = 600 °C, Ta = 400 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of one hour. The activated carbon obtained was characterized by Boehm titration, pH of point of zero charge (pHPZC), Brunauer–Emmett–Teller surface area (SBET), and scanning electron microscopy. Adsorption was performed according to different parameters: pH solution, adsorbent dosage, temperature, contact time, and initial concentration. Regeneration experiments proved that the obtained activated carbon still had a high removal capacity for Cd2+ and Pb2+ after five regeneration cycles