Design and Analysis of a Wide Loop-Bandwidth RF Synthesizer Using Ring oscillator For DECT Receiver

Wireless communication devices including cordless phones and modern digital cellular systems (DCSs) use portable transceiver systems. The frequency synthesis of this type of transceiver system is done using a phase-locked loop oscillator. Traditional on-chip implementation of a complete phase-locked loop using a ring type voltage controlled oscillator contributes higher noise at the output. An alternative architecture, phase-locked loop (PLL) with wide loop-bandwidth, is proposed in this research to suppress the noise from the traditional ring oscillator. The proposed PLL is amendable to on-chip integration as well as commercially suitable for a Digital Enhancement Cordless Telephone (DECT) system which needs flexible noise margin. In this research, a 1.5552 GHz PLL-based frequency synthesizer is designed with a noisy ring oscillator. The wide loop-bandwidth approach is applied in designing the PLL to suppress the VCO noise. In this type of frequency synthesizer, the frequency divider is operated at higher frequencies with less noise and care is taken to design the delay flip-flops and logic gates that can be operated at higher frequencies. Current-mode control can be employed in designing the logic gates and the delay flip-flop to enhance the speed performance of the divider. An alternate approach in designing a high-speed divider using a current-mode control approach is also presented

Effect of Foliar Application of Urea on Growth and Yield of Short Durative Lentil Variety (BARI Masur-9)

An experiment was conducted at Regional Agricultural Research Station, Jashore, Bangladesh during rabi season of (2019-2020) to evaluate the effect of foliar application of urea on growth and yield of short durative lentil variety (BARI Masur-9). The experiment was conducted in split plot design with three replications where time of urea spraying, P1= at branching stage, P2= at pod initiation stage were distributed in main plots and doses of urea spraying T1= application of 100% recommended fertilizers as basal except urea, T2= application of 100% recommended fertilizers as basal, T3= application of 75% of urea with 100% of other fertilizers as basal and rest of the 25% of urea by spraying, T4= application of 25% of urea with 100% of other fertilizers as basal and rest of the 75% of urea by spraying, T5= application of 50% of urea with 100% of other fertilizers as basal and rest of the 50% of urea by spraying were distributed in sub plots. The highest plant height, number of pods per plant were obtained from application of 75% of urea with 100% of other fertilizers as basal and rest of the 25% of urea spraying at pod initiation stage. The highest seed yield was also found from application of 75% of urea with 100% of other fertilizers as basal and rest of the 25% of urea spraying at pod initiation stage followed by application of 100% recommended fertilizers as basal and application of 50% of urea with 100% of other fertilizers as basal and rest of the 50% of urea by spraying at branching stage. Plant height, pods per plant and days to maturity showed positive correlation with seed yield. On the other hand days to flower and plants per m2 has no linear relationship with seed yield. The highest marginal benefit cost ratio (3.29) was recorded from application of 75% of urea with 100% of other fertilizers as basal and rest of the 25% of urea by spraying at pod initiation stage. So based on findings to increase the yield potential of BARI Masur-9 foliar application of urea may be a tool and hence application of 75% of urea with 100% of other fertilizers as basal and rest of the 25% of urea by spraying at pod initiation stage may be consider as the best treatment

Availability of aqua drugs and their uses in semi intensive culture farms at Patuakhali district in Bangladesh

A survey was undertaken to examine the accessibility of aqua-drugs and their applications in the semi-intensive aquaculture farms in Patuakhali district. A total of 83 stakeholders were selected and data gathered from aqua-medicine stores, representatives of different pharmaceuticals and semi-intensive aqua-farms owners via questionnaire interviews. PRA tools like focused group discussion, cross-checking, and key informant interviews were also used. Results show that 78% of farmers conduct polyculture and rest executes monoculture. Among the total fish farmer majority, 38% used lime for pond preparation and water quality management and potash used by 44% farmer as a disinfectant. For increasing dissolve-oxygen Oxy-rich (26%) was vastly used while 28% of farmers don’t use any oxygen supplier in their pond. However, 14% of farmers use commercial Megavit-Aqua growth promoters and 14% farmer used probiotics. For disease control, 52% and 14% of farmers use Renamycin and Renamox respectively due to its easy availability and affordability compared to probiotics. Several issues have been reported due to improper use of aquatic medications, such as lack of information about chemical use, sufficient dosage, form of application and indiscriminate use of antibiotics. This research result will help the policymaker to understand the requirement of fishers for healthy and sustainable aquaculture practices

Marketing system of summer tomato in Jashore district of Bangladesh

The study was conducted for the assessment of marketing system of summer tomato in Jashore. Summer tomato had high demand and high value crop in summer season among the consumers. Data were collected from 30 randomly selected tomato farmers and 60 traders from different market of Jashore district of Bangladesh during July-October, 2019. Farmer, faria, bepari, wholesaler, commission agents and retailer were involved in marketing of summer tomato. Marketing cost of farmar, faria, bepari, wholesaler, retailer (urban) and retailer (rural) were 430.00, 691.00, 2184.00, 2443.00, 1857.00 and 1074.00 Tk ton-1, respectively. Net margin or profit of the faria, bepari, wholesaler and retailer were 1300.00, 817.00, 557.00 and 2143.00 Tk ton-1, respectively. There were seven marketing channel exist in tomato marketing. Total marketing cost of all intermediaries was 7604.00 Tk ton-1 and net margin was 4826.00 Tk ton-1. Marketing efficiency was 2.25. Price spread between consumer paid and producer received was 8000.00 Tk ton-1. On the other hand, producer share was 78 percent. Spoilage and damage, transportation and packaging were the main marketing problem of summer tomato. Int. J. Agril. Res. Innov. Tech. 12(1): 12-17, June 202

60-66 of Honey and Sugar Solution on the Shelf Life and Quality of Dried Banana (Musa paradisiaca) Slices

Abstract The main purpose of the study was to investigate the effect of solution on the shelf life and quality of banana slices and development of high quality dehydrated banana products. Ripe banana collected from local market cut into 3, 5 and 7 mm slices. Solution effect was assessed using honey, sugar and mixed (honey plus sugar, 1:1) solution. The osmosis samples were dried in a mechanical drier at 65°C for 24 hour up to moisture content 14.6%. Fresh and dehydrated banana were analyzed for their chemical composition. The effect of pre-treatment (4 min steam blanching plus 20 min sulphyting) and nutrient content also evaluate. Percent solid gain was assumed as indicator of solution of solution effect. Percent solid gain slightly decreased (per unit weight) with increasing thickness of banana slices at constant immersion time (3 hour) and concentration (72% TSS). This gain was higher in honey solution followed by sugar solution. The response of taste panel revealed that banana slices prepared by 4 min steaming plus 20 min sulphyting (0.5% KMS) and subsequently dipping in honey solution gave better colour and flavor. It has been also revealed that pre-treatment by 4 min steaming plus 20 min sulphyting (0.3% KMS) and subsequently dripping in honey was gave better colour and flavour of banana slices. So these pre-treated dehydrated products showed highest degree of acceptability. Studies on the effect of various packaging materials showed that the single layer polythene plus keep in tin can gave the best result for storing the dried banana slices. Among the different storage condition of dried banana slices (75% RH, 80%RH and 90% RH), the 75% RH was found most effective for storing the processed slices. However, in all packaging systems and storage conditions, the slices absorbed moisture over the storage period and lost its quality. To maintain better quality of slices for longer shelflife, the low relative humidity and moisture proof packaging system (polythene plus kept in tin can or laminated aluminum foil) may be required

Taxonomic diversity of weed flora in pulse crops growing field at south-western part of Bangladesh

Pulses are important field crops in Bangladesh and weed infestation in pulses field is a great concern now a days. So, a rigorous field survey was conducted throughout the pulses growing season at pulses grower farmers’ field of south-western part of Bangladesh to know the present status of weed infestation in pulses field. During the survey, fresh samples were collected along with other related information e.g., habitat, location, collection date, flowering time, crop/plant association. Fresh samples were dried well for making herbarium specimens. A sum of 13 weed species under 12 genera and 08 families were collected and documented their uses in various ailments. Among the families, Amaranthaceae is the highest-represented family with 03 species. Among the genera, the largest genera Amaranthus represented by 2 species. Cyperous rotundus, Cynodon dactylon, Chenopodium album, Amaranthus spinosus, Croton bonplandianum, Coccinia grandis are the common and major weed species in pulse crop growing field in south-western part of Bangladesh. The knowledge generated from the present research would be helpful for the management practices of pulse crop associated weeds as well as for getting high economic benefits from beneficial species

Room temperature control of grain orientation via directionally modulated current pulses

Traditional approaches to control the microstructure of materials, such as annealing, require high temperature treatment for long periods of time. In this study, we present a room temperature microstructure manipulation method by using the mechanical momentum of electrical current pulses. In particular, a short burst of high-density current pulses with low duty cycle is applied to an annealed FeCrAl alloy, and the corresponding response of microstructure is captured by using Electron Backscattered Diffraction (EBSD) analysis. We show evidence of controllable changes in grain orientation at specimen temperature around 28 °C. To demonstrate such microstructural control, we apply the current pulses in two perpendicular directions and observe the corresponding grain rotation. Up to 18° of grain rotation was observed, which could be reversed by varying the electropulsing direction. Detailed analysis at the grain level reveals that electropulsing in a specific direction induces clockwise rotation from their pristine state, while subsequent cross-perpendicular electropulsing results in an anticlockwise rotation. In addition, our proposed room temperature processing yields notable grain refinement, while the average misorientation and density of low-angle grain boundaries (LAGBs) remain unaltered. The findings of this study highlight the potentials of ‘convective diffusion’ in electrical current based materials processing science towards microstructural control at room temperature

Percutaneous balloon kyphoplasty, a good minimally invasive surgical option for osteoporotic thoracolumbar compression fracture

The aim of this study is to evaluate balloon kyphoplasty as a surgical option for osteoporotic thoracolumbar compression fracture. The study was conducted on 30 patients from January 2014 to December 2017. The anterior vertebral height, kyphotic angle and functional evaluation by Oswestry disability index (ODI) and visual analogue scale (VAS) score were recorded preoperatively, immediate post-operatively at 3, 6, 12 months and yearly then on. All patients showed improvement in mean kyphotic angle from 16.4 ± 3.5 to 5.6 ± 1.7 post-operatively and 8.4 ± 1.6 at final follow-up. There was significant increase in mean anterior vertebral height from 51 ± 7.3% before surgery to 75.5 ± 7.4% at one day after surgery and 71.2 ± 3.2% at the last follow-up. There was significant improvement in mean VAS score from 8.1 ± 0.9 before surgery to 2.2 ± 0.4 at one day, and 2.4 ± 0.3 at final follow-up. The improvement in patients’ ODI score after surgery from 71.4 ± 3.4 to 26.0 ± 4.8 at one day and 21.2 ± 5.5 at final follow-up was noted. The mean operating time was 45.5 ± 15.5 min for each vertebra. Within first day of surgery improvement in pain relief and mobility was experienced by all patients. The orthopedic balloon ruptured in one patient and it was replaced then procedure was continued with no complications. There were no neurological complications in all cases and there was no infections and any occurrence of symptomatic pulmonary embolism. In conclusion, balloon kyphoplasty is a good minimally invasive procedure where along with reduction of pain and disability there is also restoration of sagittal alignment post-operatively

Percutaneous balloon kyphoplasty, a good minimally invasive surgical option for osteoporotic thoracolumbar compression fracture

The aim of this study is to evaluate balloon kyphoplasty as a surgical option for osteoporotic thoracolumbar compression fracture. The study was conducted on 30 patients from January 2014 to December 2017. The anterior vertebral height, kyphotic angle and functional evaluation by Oswestry disability index (ODI) and visual analogue scale (VAS) score were recorded preoperatively, immediate post-operatively at 3, 6, 12 months and yearly then on. All patients showed improvement in mean kyphotic angle from 16.4 ± 3.5 to 5.6 ± 1.7 post-operatively and 8.4 ± 1.6 at final follow-up. There was significant increase in mean anterior vertebral height from 51 ± 7.3% before surgery to 75.5 ± 7.4% at one day after surgery and 71.2 ± 3.2% at the last follow-up. There was significant improvement in mean VAS score from 8.1 ± 0.9 before surgery to 2.2 ± 0.4 at one day, and 2.4 ± 0.3 at final follow-up. The improvement in patients’ ODI score after surgery from 71.4 ± 3.4 to 26.0 ± 4.8 at one day and 21.2 ± 5.5 at final follow-up was noted. The mean operating time was 45.5 ± 15.5 min for each vertebra. Within first day of surgery improvement in pain relief and mobility was experienced by all patients. The orthopedic balloon ruptured in one patient and it was replaced then procedure was continued with no complications. There were no neurological complications in all cases and there was no infections and any occurrence of symptomatic pulmonary embolism. In conclusion, balloon kyphoplasty is a good minimally invasive procedure where along with reduction of pain and disability there is also restoration of sagittal alignment post-operatively