Synthesis of Healable Organic Semiconductor Through Dioxaborolane Bond

The field of organic semiconductors have gained enormous attention the past few decades. Organic materials offer numerous advantages over their inorganic counterparts. Recently a number of works have demonstrated organic semiconductors with healable properties. We aim to investigate the healable ability of an organic semiconductor by mimicking a vitrimer system through the reversible dioxaborolane bond. Vitrimers are polymers with reversible crosslink system. It has been reported that the use of the borane-oxygen bond as the crosslink showed good mechanical performance. The electrical properties will be inspected for the vitrimer-like polymer. In this report we describe a Diketopyrrolopyrrole base polymer incorporating reversible dioxaborolane bonds synthesized through borane esterification. The electrical properties and the healing properties of the polymer will be investigated. Here, we present the progress of synthesizing to the monomer, and we report the trials for the reactions. The predicted result for the overall yield of the monomer is 30-40%

Bostonia: The Boston University Alumni Magazine. Volume 15

Founded in 1900, Bostonia magazine is Boston University's main alumni publication, which covers alumni and student life, as well as university activities, events, and programs

Reduced Lentivirus Susceptibility in Sheep with TMEM154 Mutations

Visna/Maedi, or ovine progressive pneumonia (OPP) as it is known in the United States, is an incurable slow-acting disease of sheep caused by persistent lentivirus infection. This disease affects multiple tissues, including those of the respiratory and central nervous systems. Our aim was to identify ovine genetic risk factors for lentivirus infection. Sixty-nine matched pairs of infected cases and uninfected controls were identified among 736 naturally exposed sheep older than five years of age. These pairs were used in a genome-wide association study with 50,614 markers. A single SNP was identified in the ovine transmembrane protein (TMEM154) that exceeded genome-wide significance (unadjusted p-value 3×10−9). Sanger sequencing of the ovine TMEM154 coding region identified six missense and two frameshift deletion mutations in the predicted signal peptide and extracellular domain. Two TMEM154 haplotypes encoding glutamate (E) at position 35 were associated with infection while a third haplotype with lysine (K) at position 35 was not. Haplotypes encoding full-length E35 isoforms were analyzed together as genetic risk factors in a multi-breed, matched case-control design, with 61 pairs of 4-year-old ewes. The odds of infection for ewes with one copy of a full-length TMEM154 E35 allele were 28 times greater than the odds for those without (p-value<0.0001, 95% CI 5–1,100). In a combined analysis of nine cohorts with 2,705 sheep from Nebraska, Idaho, and Iowa, the relative risk of infection was 2.85 times greater for sheep with a full-length TMEM154 E35 allele (p-value<0.0001, 95% CI 2.36–3.43). Although rare, some sheep were homozygous for TMEM154 deletion mutations and remained uninfected despite a lifetime of significant exposure. Together, these findings indicate that TMEM154 may play a central role in ovine lentivirus infection and removing sheep with the most susceptible genotypes may help eradicate OPP and protect flocks from reinfection

Backbone Flexibility On Conjugated Polymer\u27s Crystallization Behavior and Thin Film Mechanical Stability

Extensive efforts have been made to develop flexible electronics with conjugated polymers that are intrinsically stretchable and soft. We recently systematically investigated the influence of conjugation break spacers (CBS) on the thermomechanical properties of a series n-type naphthalene diimide-based conjugated polymer and found that CBS can significantly reduce chain rigidity, melting point, as well as glass transition temperature. In the current work, we further examined the influence of CBS on the crystallization behaviors of PNDI-C3 to C6, including isothermal crystallization kinetics, crystal polymorphism and subsequently time-dependent modulus, in a holistic approach using differential scanning calorimetry, X-ray scattering, polarized optical microscopy, atomic force microscopy, and pseudo-free-standing tensile test. Results demonstrate that increasing the length of CBS increases the crystallization half-time by 1 order of magnitude from PNDI-C3 to PNDI-C6 from approximately 103 to 104 s. The crystallization rate shows a bimodal dependence on the temperature due to the presence of different polymorphs. In addition, crystallization significantly affects the mechanical response, a stiffening in the modulus of nearly three times is observed for PNDI-C5 when annealed at room temperature for 12 h. Crystallization kinetic is also influenced by molecular weight (MW). Higher MW PNDI-C3 crystallizes slower. In addition, an odd–even effect was observed below 50°C, odd-number PNDI-Cxs (C3 and C5) crystallize slower than the adjacent even-numbered PNDI-Cxs (C4 and C6). Our work provides an insight to design flexible electronics by systematically tuning the mechanical properties through control of polymer crystallization by tuning backbone rigidity

N-Type Complementary Semiconducting Polymer Blends

Complementary semiconducting polymer blends (c-SPBs) have been demonstrated as an effective approach to balance performance and processing of semiconducting polymers for organic field-effect transistors. All previously reported c-SPBs have been exclusively based on p-type polymers. In this report, we designed and synthesized naphthalene diimide (NDI) based matrix polymers and systematically studied n-type charge transport behaviors of their corresponding polymer blends. NDI-Cm (m = 3–7) polymers displayed low melting points (55–105 °C) allowing for the lowest temperature melt-processing of organic transistors to date with mobilities up to 1.01 × 10–3 cm2 V–1 s–1. NDI-Cm polymers were revealed to be nearly amorphous by GIXRD and thin film UV–vis which explain the lowered thermal transitions and observed poor charge transport. Utilizing a c-SPB with 5% fully conjugated P(NDI2OD-T2), the transistor performance improved up to 100-fold of the pure matrix polymer despite the low crystallinity of NDI-Cm thin films

Impact of Backbone Rigidity On the Thermomechanical Properties of Semiconducting Polymers With Conjugation Break Spacers

There remains a lack of fundamental understanding in the role of backbone rigidity on the thermomechanical properties of conjugated polymers. Here, we provide the first holistic approach to understand the fundamental influence of backbone rigidity on an n-type naphthalene diimide-based conjugated polymer, denoted by PNDI-Cx, through insertion of a flexible conjugation break spacer (CBS). CBS lengths are varied from fully conjugated with zero alkyl spacer (PNDI-C0) to a seven-carbon alkyl spacer (PNDI-C7), with the CBS engineered into each repeat unit for systematic evaluation. Solution small-angle neutron scattering and oscillatory shear rheometry were employed to provide the first quantitative evidence of CBS influence over conjugated polymer chain rigidity and entanglement molecular weight (Me), demonstrating a reduction in the Kuhn length from 521 to 36 Å for fully conjugated PNDI-C0 and PNDI-C6, respectively, as well as a nearly consistent Me of ∼15 kDa upon the addition of CBS. Thermomechanical properties, such as elastic modulus and glass-transition temperature, were shown to decrease with an increasing length of CBS. An extraordinary ductility, upwards of 400% tensile strain before fracture, was observed for high-molecular-weight PNDI-C4, which we attribute to a high number of entanglements and disruption of crystallization. Furthermore, the deformation mechanism for PNDI-Cx was studied under strain through X-ray diffraction, polarized UV–vis spectroscopy, and atomic force microscopy. Overall, this work sheds light on the important role of backbone rigidity in designing flexible and stretchable conjugated polymers

Challenge and Solution of Characterizing Glass Transistion Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers highly depend on their glass transition temperature (T g). Differential scanning calorimetry (DSC) is commonly used to measure T g of polymers. However, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T g in such type of polymers. The changes in specific heat capacity (Δc p) at T g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δc p from flexible polymer (0.28 J g−1 K−1 for polystyrene) to rigid CPs (10−3 J g−1 K−1 for a naphthalene diimide‐based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δc p at T g by a factor of 10, confirming that backbone rigidity reduces the Δc p. Additionally, an increase in the crystalline fraction of the CPs further reduces Δc p. We conclude that the difficulties of determining T g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D‐A CPs with weak transition signals