Structural perfection in poorly lattice matched heterostructures

Continuum elastic theory is applied to the formation of misfit dislocations and point defects in strained layer structures. Explicit calculations of the energies of misfit dislocations in the double‐ and single‐kink geometries yield line tensions below which strained films are stable with respect to defect formation. Our results yield a mismatch‐dependent stability limit which, in the double kink case, differs from the Matthews–Blakeslee model by a geometrical factor and by the addition of a stress term associated with climb of the misfit dislocation. While our calculations yield equilibrium stability limits which may not correspond to observed critical thicknesses, the calculated stresses may be applied to descriptions of the kinetics of strain relief in films grown beyond these limits. Last, calculations of strain‐related contributions to the free energy of formation of point defects suggest a contribution │ΔG_(strain)│ ≃0.25 eV for a 5% lattice mismatch. This suggests a means of suppressing or enhancing the formation of vacancies or interstitials in semiconductors favoring these defects

Examining the role of smart TVs and VR HMDs in synchronous at-a-distance media consumption

This article examines synchronous at-a-distance media consumption from two perspectives: How it can be facilitated using existing consumer displays (through TVs combined with smartphones), and imminently available consumer displays (through virtual reality (VR) HMDs combined with RGBD sensing). First, we discuss results from an initial evaluation of a synchronous shared at-a-distance smart TV system, CastAway. Through week-long in-home deployments with five couples, we gain formative insights into the adoption and usage of at-a-distance media consumption and how couples communicated during said consumption. We then examine how the imminent availability and potential adoption of consumer VR HMDs could affect preferences toward how synchronous at-a-distance media consumption is conducted, in a laboratory study of 12 pairs, by enhancing media immersion and supporting embodied telepresence for communication. Finally, we discuss the implications these studies have for the near-future of consumer synchronous at-a-distance media consumption. When combined, these studies begin to explore a design space regarding the varying ways in which at-a-distance media consumption can be supported and experienced (through music, TV content, augmenting existing TV content for immersion, and immersive VR content), what factors might influence usage and adoption and the implications for supporting communication and telepresence during media consumption

Deformational sequence of a portion of the Michipicoten greenstone belt, Chabanel Township, Ontario

Detailed mapping at a scale of one inch = 400 feet is being carried out within a fume kill, having excellent exposure, located in the southwestern portion of the Michipicoten Greenstone Belt near Wawa, Ontario. The rocks are metasediments and metavolcanics of lower greenschist facies. U-Pb geochronology indicates that they are at least 2698 + or - 11 Ma old. The lithologic packages strike northeast to northwest, but the dominant strike is approximately east-west. Sedimentary structures and graded bedding are well preserved, aiding in the structural interpretation of this multiply deformed area. At least six phases of deformation within a relatively small area of the Michipicoten Greenstone Belt have been tentatively identified. These include the following structural features in approximate order of occurrence: (0) soft-sediment structures; (1) regionally overturned rocks, flattened pebbles, bedding parallel cleavage, and early, approximately bedding parallel faults; (2) northwest to north striking cleavage; (3) northeast striking cleavage and associated folds, and at least some late movement on approximately bedding parallel faults; (4) north-northwest and northeast trending faults; and (5) diabase dikes and associated fracture cleavages. Minor displacement of the diabase dikes occurs on faults that appear to be reactivated older structures

Preliminary structural model for the southwestern part of the Michipicoten greenstone belt, Ontario

The southwestern part of the Michipicoten Greenstone Belt includes a 100 sq km fume kill extending northeastwards from the twon of Wawa, Ontario. Except for a strip along the Magpie River that is covered by Pleistocene gravels, outcrop in the fume kill averages about 30-50%. Within this area are all the major lithologic belts characteristic of the southwestern fourth of the Michipicoten Greenstone Belt. All of the area mapped to date lies within Chabenel Township, recently mapped at 4" = 1 mile. Following a brief reconnaissance in 1983, mapping at a scale of 1" = 400' was begun within and adjacent to the fume kill in 1984. Two objectives are sought (1) determinaion of the geometry and sequence of folding, faulting, cleavage development, and intrusion; and (2) defining and tracing lithologic packages, and evaluating the nature of the contacts between these packages. Results for objective (1) are discussed in a companion abstract; this abstract will present tentative results for objective

New negative differential resistance device based on resonant interband tunneling

We propose and demonstrate a novel negative differential resistance device based on resonant interband tunneling. Electrons in the InAs/AlSb/GaSb/AlSb/InAs structure tunnel from the InAs conduction band into a quantized state in the GaSb valence band, giving rise to a peak in the current-voltage characteristic. This heterostructure design virtually eliminates many of the competing transport mechanisms which limit the performance of conventional double-barrier structures. Peak-to-valley current ratios as high as 20 and 88 are observed at room temperature and liquid-nitrogen temperature, respectively. These are the highest values reported for any tunnel structure

Observation of large peak-to-valley current ratios and large peak current densities in AlSb/InAs/AlSb double-barrier tunnel structures

We report improved peak-to-valley current ratios and peak current densities in InAs/AlSb double-barrier, negative differential resistance tunnel structures. Our peak-to-valley current ratios are 2.9 at room temperature and 10 at liquid-nitrogen temperatures. Furthermore, we have observed peak current densities of 1.7×10^5 A/cm^2. These figures of merit are substantially better than previously reported values. The improvements are obtained by adding spacer layers near the barriers, thinner well regions, and thinner barriers

Demonstration of large peak-to-valley current ratios in InAs/AlGaSb/InAs single-barrier heterostructures

We report large peak-to-valley current ratios in InAs/AlxGa1−xSb/InAs single-barrier tunnel structures. The mechanism for single-barrier negative differential resistance (NDR) has been proposed and demonstrated recently. A peak-to-valley current ratio of 3.4 (1.2) at 77 K (295 K), which is substantially larger than what has been previously reported, was observed in a 200-Å-thick Al0.42Ga0.58Sb barrier. A comparison with a calculated current-voltage curve yields good agreement in terms of peak current and the slope of the NDR region. The single-barrier structure is a candidate for high-speed devices because of expected short tunneling times and a wide NDR region

Enhancing design learning using a digital repository

The process of design is context dependent and open-ended, and therefore does not revolve around a specific body of information or knowledge. The educational paradigm shift in the area of engineering design from teaching to coaching and the increased use of social constructivist learning ideals requires students to have access to as wide a range of information as possible. Digital resources provide an excellent opportunity for extending the range of information available to design students and to this end, as part of a joint research program with Stanford University, the University of Strathclyde has developed a groupware product called LauLima to provide students with a collaborative environment which allows them to gather, organise, store and share information. This paper describes the improvement to design learning, based on a Design Knowledge Framework, in a 3rd year product design engineering project from session 03/04 to 04/05 which has been facilitated by the implementation of this technology