Fuel Injector: Air swirl characterization aerothermal modeling, phase 2, volume 2

A well integrated experimental/analytical investigation was conducted to provide benchmark quality data relevant to prefilming type airblast fuel nozzle and its interaction with combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) equipment was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM) and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems

Fuel injector: Air swirl characterization aerothermal modeling, phase 2, volume 1

A well integrated experimental/analytical investigation was conducted to provide benchmark quality relevant to a prefilming type airblast fuel nozzle and its interaction with the combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM), and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems

Temperature thresholds for surface blistering of platinum and stainless steel exposed to curium-242 alpha radiations

Implantation of helium in materials exposed to alpha-emitting radionuclides such as /sup 242/Cm causes surface blistering at elevated temperatures. The temperature thresholds for such blistering are of practical importance to the selection of suitable container materials for radionuclides, and are of fundamental interest with regard to the mechanisms of helium blistering of materials in radiation environments. The purpose of this investigation was to establish temperature thresholds for surface blistering of platinum and stainless-steel container materials by post-irradiation heating of specimens exposed at room temperature to alpha particles from an external /sup 242/Cm source. These thresholds were compared with (1) the analogous temperature thresholds for surface blistering of materials exposed to external beams of accelerator helium ions, and (2) thresholds for swelling and grain-boundary cracking of materials in which helium is generated internally by (n,..cap alpha..) reactions during reactor exposures

We must become gatekeepers : editing indigenous writing

With the proliferation of Indigenous texts currently published by specialist and mainstream publishers, non-Indigenous editors increasingly find themselves negotiating the uncomfortable territories of race, politics and power for which current training (in an Australian context) leaves them poorly prepared. Indigenous writer Anita Heiss advocates the employment of Indigenous editors as an \u27ideal\u27 solution, though few are currently working in the Australian industry. Margaret McDonell, an experienced non-Indigenous editor of Indigenous texts, suggests non-Indigenous editors need to \u27undertake a journey of learning\u27 during which \u27assumptions, biases, tastes and preconceptions\u27 are examined. Yet this presents a difficult task within a postcolonial society, when, as identified by Clare Bradford, even the classification of texts into genres such as fiction and the short story represents an entirely Eurocentric construct, \u27not readily correspond[ing] with Aboriginal schemata\u27. The Australian Society of Authors\u27 discussion paper \u27Writing about Indigenous Australia: Some Issues to Consider and Protocols to Follow\u27 provides practical guidelines that may be adapted for editorial use. This article canvasses these and other ideas with a focus on establishing an ethical and appropriately sensitive cross-cultural approach to editing Indigenous writing.<br /

Psychoeducation and the family burden in schizophrenia: a randomized controlled trial

Abstract Background The majority of patients with schizophrenia live with their relatives in Pakistan, thereby families experience a considerable burden. We aimed to study the impact of psychoeducation on the burden of schizophrenia on the family in a randomised controlled trial. Methods A total of 108 patients with schizophrenia and their family members from the outpatient department of a teaching hospital in Lahore, Pakistan were randomised. Both groups received psychotropic drugs but one group received psychoeducation in addition. Family burden was assessed at the time of recruitment and at 6 months post intervention. Results In all, 99 patients and their relatives completed the treatment. There was significant reduction in burden at post-intervention assessment in the psychoeducation group based on intention to treat analysis. Conclusion Family psychoeducation can be an important intervention for patients with schizophrenia in Pakistan.</p