2,523 research outputs found

    Applicability and Utility of the Astromaterials X-Ray Computed Tomography Laboratory at Johnson Space Center

    Get PDF
    The Astromaterials Acquisition and Curation Office at NASAs Johnson Space Center is responsible for curating all of NASAs astromaterial sample collections (i.e. Apollo samples, Luna Samples, Antarctic Meteorites, Cosmic Dust Particles, Microparticle Impact Collection, Genesis solar wind atoms, Stardust comet Wild-2 particles, Stardust interstellar particles, and Hayabusa asteroid Itokawa particles) [1-3]. To assist in sample curation and distribution, JSC Curation has recently installed an X-ray computed tomography (XCT) scanner to visualize and characterize samples in 3D. [3] describes the instrumental set-up and the utility of XCT to astromaterials curation. Here we describe some of the current and future projects and illustrate the usefulness of XCT in studying astromaterials

    The Opera Instrument: An Advanced Curation Development for Mars Sample Return Organic Contamination Monitoring

    Get PDF
    Mars Sample Return (MSR) requires strict organic contamination control (CC) and contamination knowledge (CK) as outlined by the Mars 2020 Organic Contamination Panel (OCP). This includes a need to monitor surficial organic contamination to a ng/sq. cm sensitivity level. Archiving and maintaining this degree of surface cleanliness may be difficult but has been achieved. MSR's CK effort will be very important because all returned samples will be studied thoroughly and in minute detail. Consequently, accurate CK must be collected and characterized to best interpret scientific results from the returned samples. The CK data are not only required to make accurate measurements and interpretations for carbon-depleted martian samples, but also to strengthen the validity of science investigations performed on the samples. The Opera instrument prototype is intended to fulfill a CC/CK role in the assembly, cleaning, and overall contamination history of hardware used in the MSR effort, from initial hardware assembly through post-flight sample curation. Opera is intended to monitor particulate and organic contamination using quartz crystal microbalances (QCMs), in a self-contained portable package that is cleanroom-compliant. The Opera prototype is in initial development capable of approximately 100 ng/sq. cm organic contamination sensitivity, with additional development planned to achieve 1 ng/sq. cm. The Opera prototype was funded by the 2017 NASA Johnson Space Center Innovation Charge Account (ICA), which provides funding for small, short-term projects

    Can Silicon-Smelting Contribute to the Low O/Si Ratio on the Surface of Mercury?

    Get PDF
    The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft collected data that provided important insights into the structure, chemical makeup, and compositional diversity of Mercury. Among the many discoveries about Mercury made by MESSENGER, several surprising compositional characteristics of the surface were observed. These discoveries include elevated sulfur abundances (up to 4 wt.%), elevated abundances of graphitic carbon (0-4.1 wt.% across the surface with an additional 1-3 wt.% graphite above the global average in low reflectance materials), low iron abundances (less than 2 wt.%), and low oxygen abundances (O/Si weight ratio of 1.20+/-0.1). These exotic characteristics likely have important implications for the thermochemical evolution of Mercury and point to a planet that formed under highly reducing conditions. In the present study, we focus specifically on the low O/Si ratio of Mercury, which is anomalous compared to all other planetary materials. A recent study that considered the geochemical implications of the low O/Si ratio reported that 12-20% of the surface materials on Mercury are composed of Si-rich, Si-Fe alloys. They further postulated that the origin of the metal is best explained by a combination of space weathering and graphite-induced smelting that was facilitated by interaction of graphite with boninitic and komatiitic parental liquids. The goal of the present study is to assess the plausibility of smelting on Mercury through experiments run at the conditions that McCubbin et al. indicated would be favorable for Si-smelting

    Measurement of direct photon production at Tevatron fixed target energies

    Full text link
    Measurements of the production of high transverse momentum direct photons by a 515 GeV/c piminus beam and 530 and 800 GeV/c proton beams in interactions with beryllium and hydrogen targets are presented. The data span the kinematic ranges of 3.5 < p_T < 12 GeV/c in transverse momentum and 1.5 units in rapidity. The inclusive direct-photon cross sections are compared with next-to-leading-order perturbative QCD calculations and expectations based on a phenomenological parton-k_T model.Comment: RevTeX4, 23 pages, 32 figures, submitted to Phys. Rev.

    Robotic geometric and volumetric inspection of high value and large scale aircraft wings

    Get PDF
    Increased demands in performance and production rates require a radical new approach to the design and manufacturing of aircraft wings. Performance of modern robotic manipulators has enabled research and development of fast automated non-destructive testing (NDT) systems for complex geometries. This paper presents recent outcomes of work aimed at removing the bottleneck due to data acquisition rates, to fully exploit the scanning speed of modern 6-DoF manipulators. The geometric assessment of the parts is carried out with a robotised dynamic laser scanner encoded through an absolute laser tracker. This method allows scanning speeds up to 330mm/s at 1mm pitch. State of the art ultrasonic instrumentation has been integrated into a large robot cell to enable fast data acquisition, high scan resolutions and accurate positional encoding. A fibre optic connection between the ultrasonic instrument and the server computer enables data transfer rates up to 1.6 GB/s. The robotic inspection system presented herein is currently being tested for industrial exploitation. The adopted system integration strategies allow traditional ultrasonic phased array scanning as well as full matrix capture (FMC) and other novel scanning approaches (e.g. multi-Tx phased array). Scan results, relative to a 1.2m x 3m carbon fibre sample, are presented. The system shows a reference scanning rate of 25.3m2/hour with an 8Tx/8Rx PA approach and an ultrasonically reachable scanning rate over 100m2/hour with the novel techniques

    Lunar Outgassing, Transient Phenomena and The Return to The Moon, I: Existing Data

    Full text link
    Herein the transient lunar phenomena (TLP) report database is subjected to a discriminating statistical filter robust against sites of spurious reports, and produces a restricted sample that may be largely reliable. This subset is highly correlated geographically with the catalog of outgassing events seen by the Apollo 15, 16 and Lunar Prospector alpha-particle spectrometers for episodic Rn-222 gas release. Both this robust TLP sample and even the larger, unfiltered sample are highly correlated with the boundary between mare and highlands, as are both deep and shallow moonquakes, as well as Po-210, a long-lived product of Rn-222 decay and a further tracer of outgassing. This offers another significant correlation relating TLPs and outgassing, and may tie some of this activity to sagging mare basalt plains (perhaps mascons). Additionally, low-level but likely significant TLP activity is connected to recent, major impact craters (while moonquakes are not), which may indicate the effects of cracks caused by the impacts, or perhaps avalanches, allowing release of gas. The majority of TLP (and Rn-222) activity, however, is confined to one site that produced much of the basalt in the Procellarum Terrane, and it seems plausible that this TLP activity may be tied to residual outgassing from the formerly largest volcanic ffusion sites from the deep lunar interior. With the coming in the next few years of robotic spacecraft followed by human exploration, the study of TLPs and outgassing is both promising and imperiled. We will have an unprecedented pportunity to study lunar outgassing, but will also deal with a greater burden of anthropogenic lunar gas than ever produced. There is a pressing need to study lunar atmosphere and its sources while still pristine. [Abstract abridged.]Comment: 35 pages, 3 figures, submitted to Icarus. Other papers in series found at http://www.astro.columbia.edu/~arlin/TLP

    Recommended Maximum Temperature For Mars Returned Samples

    Get PDF
    The Returned Sample Science Board (RSSB) was established in 2015 by NASA to provide expertise from the planetary sample community to the Mars 2020 Project. The RSSB's first task was to address the effect of heating during acquisition and storage of samples on scientific investigations that could be expected to be conducted if the samples are returned to Earth. Sample heating may cause changes that could ad-versely affect scientific investigations. Previous studies of temperature requirements for returned mar-tian samples fall within a wide range (-73 to 50 degrees Centigrade) and, for mission concepts that have a life detection component, the recommended threshold was less than or equal to -20 degrees Centigrade. The RSSB was asked by the Mars 2020 project to determine whether or not a temperature requirement was needed within the range of 30 to 70 degrees Centigrade. There are eight expected temperature regimes to which the samples could be exposed, from the moment that they are drilled until they are placed into a temperature-controlled environment on Earth. Two of those - heating during sample acquisition (drilling) and heating while cached on the Martian surface - potentially subject samples to the highest temperatures. The RSSB focused on the upper temperature limit that Mars samples should be allowed to reach. We considered 11 scientific investigations where thermal excursions may have an adverse effect on the science outcome. Those are: (T-1) organic geochemistry, (T-2) stable isotope geochemistry, (T-3) prevention of mineral hydration/dehydration and phase transformation, (T-4) retention of water, (T-5) characterization of amorphous materials, (T-6) putative Martian organisms, (T-7) oxidation/reduction reactions, (T-8) (sup 4) He thermochronometry, (T-9) radiometric dating using fission, cosmic-ray or solar-flare tracks, (T-10) analyses of trapped gasses, and (T-11) magnetic studies
    • …
    corecore