136 research outputs found
Proposal of a predictive mixed experimental-numerical approach for assessing the performance of farm tractor engines fuelled with diesel-biodiesel-bioethanol blends
The effect of biofuel blends on the engine performance and emissions of agricultural machines can be extremely complex to predict even if the properties and the effects of the pure substances in the blends can be sourced from the literature. Indeed, on the one hand, internal combustion engines (ICEs) have a high intrinsic operational complexity; on the other hand, biofuels show antithetic effects on engine performance and present positive or negative interactions that are difficult to determine a priori. This study applies the Response Surface Methodology (RSM), a numerical method typically applied in other disciplines (e.g., industrial engineering) and for other purposes (e.g., set-up of production machines), to analyse a large set of experimental data regarding the mechanical and environmental performances of an ICE used to power a farm tractor. The aim is twofold: i) to demonstrate the effectiveness of RSM in quantitatively assessing the effects of biofuels on a complex system like an ICE; ii) to supply easy-to-use correlations for the users to predict the effect of biofuel blends on performance and emissions of tractor engines. The methodology showed good prediction capabilities and yielded interesting outcomes. The effects of biofuel blends and physical fuel parameters were adopted to study the engine performance. Among all possible parameters depending on the fuel mixture, the viscosity of a fuel blend demonstrated a high statistical significance on some system responses directly related to the engine mechanical performances. This parameter can constitute an interesting indirect estimator of the mechanical performances of an engine fuelled with such blend, while it showed poor accuracy in predicting the emissions of the ICE (NOx, CO concentration and opacity of the exhaust gases) due to a higher influence of the chemical composition of the fuel blend on these parameters; rather, the blend composition showed a much higher accuracy in the assessment of the mechanical performance of the ICE
Bio-based benzoxazines synthesized in a deep eutectic solvent: A greener approach toward vesicular nanosystems
A green synthesis of benzoxazines, based upon reaction of cardanol with formaldehyde and primary amines, is achieved in high yields using choline chloride-urea mixture as deep eutectic solvent. Then, it is demonstrated how the cardanol-based benxoxazines can be employed as only component for the preparation of a nanovesicular systems
Thermal and structural characteristics of waste derived biomass for potential application in nanomaterials.
Soil Microbial Biomass Under Native Cerrado and Its Changes After the Pasture and Annual Crops Introduction
Mitigation of nitrous oxide emissions in grazing systems through nitrifcation inhibitors: a meta‑analysis
Grasslands are the largest contributor of nitrous oxide (N2O) emissions in the agriculture sector due to livestock excreta and nitrogen fertilizers applied to the soil. Nitrification inhibitors (NIs) added to N input have reduced N2O emissions, but can show a range of efficiencies depending on climate, soil, and management conditions. A meta-analysis study was
conducted to investigate the factors that influence
the efficiency of NIs added to fertilizer and excreta
in reducing N2O emissions, focused on grazing systems. Data from peer-reviewed studies comprising 2164 N2O emission factors (EFs) of N inputs with and without NIs addition were compared. The N2O EFs varied according to N source (0.0001–8.25%). Overall, NIs reduced the N2O EF from N addition
by 56.6% (51.1–61.5%), with no difference between
NI types (Dicyandiamide—DCD; 3,4-Dimethylpyrazole phosphate—DMPP; and Nitrapyrin) or N source (urine, dung, slurry, and fertilizer). The NIs were more efficient in situations of high N2O emissions compared with low; the reduction was 66.0% when EF>1.5% of N applied compared with 51.9% when EF≤0.5%. DCD was more efficient when applied at rates>10 kg ha−1. NIs were less efficient in urine with lower N content (≤7 g kg−1). NI efficiency was negatively correlated with soil bulk density, and positively correlated with soil moisture and temperature. Better understanding and management of NIs can
optimize N2O mitigation in grazing systems, e.g., by
mapping N2O risk and applying NI at variable rate,
contributing to improved livestock sustainabilit
Light-emitting porphyrin derivative obtained from a subproduct of the cashew nut shell liquid: A promising material for OLED applications
In this work, the meso-tetra[4-(2-(3-n-pentadecylphenoxy)ethoxy]phenylporphyrin (H2P), obtained from the cashew nut shell liquid (CNSL), and its zinc (ZnP) and copper (CuP) metallic complexes, were applied as emitting layers in organic light emitting diodes (OLEDs). These compounds were characterized via optical and electrochemical analysis and the electroluminescent properties of the device have been studied. We performed a cyclic voltammetry analysis to determine the Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energy levels for the porphyrins, in order to select the proper materials to assemble the device. H2P and ZnP presented fluorescence emission band in the red region, from 601 nm to 718 nm. Moreover, we verified that the introduction of bulky substituents hinders the π-πstacking, favoring the emission in the film. In addition, the strongest emitter, ZnP, presented a threshold voltage of 4 V and the maximum irradiance of 10 μW cm-2 with a current density (J) of 15 mA cm-2 at 10 V. The CuP complex showed to be a favorable material for the design of OLEDs in the infrared. These results suggest that the porphyrins derived from a renewable source, such as CNSL, is a promising material to be used in organic optoelectronic devices such as OLEDs
Mitigation of nitrous oxide emissions in grazing systems through nitrification inhibitors: a meta-analysis
Grasslands are the largest contributor of nitrous oxide (N2O) emissions in the agriculture sector due to livestock excreta and nitrogen fertilizers applied to the soil. Nitrification inhibitors (NIs) added to N input have reduced N2O emissions, but can show a range of efficiencies depending on climate, soil, and management conditions. A meta-analysis study was conducted to investigate the factors that influence the efficiency of NIs added to fertilizer and excreta in reducing N2O emissions, focused on grazing systems. Data from peer-reviewed studies comprising 2164 N2O emission factors (EFs) of N inputs with and without NIs addition were compared. The N2O EFs varied according to N source (0.0001-8.25%). Overall, NIs reduced the N2O EF from N addition by 56.6% (51.1-61.5%), with no difference between NI types (Dicyandiamide-DCD; 3,4-Dimethylpyrazole phosphate-DMPP; and Nitrapyrin) or N source (urine, dung, slurry, and fertilizer). The NIs were more efficient in situations of high N2O emissions compared with low; the reduction was 66.0% when EF > 1.5% of N applied compared with 51.9% when EF 10 kg ha(-1). NIs were less efficient in urine with lower N content (<= 7 g kg(-1)). NI efficiency was negatively correlated with soil bulk density, and positively correlated with soil moisture and temperature. Better understanding and management of NIs can optimize N2O mitigation in grazing systems, e.g., by mapping N2O risk and applying NI at variable rate, contributing to improved livestock sustainability
Magnetic nanosystem for cancer therapy using oncocalyxone A, an antitomour secondary metabolite isolated from a Brazilian plant
none14siThis paper describes the investigation and development of a novel magnetic drug delivery nanosystem (labeled as MO-20) for cancer therapy. The drug employed was oncocalyxone A (onco A), which was isolated from Auxemma oncocalyx, an endemic Brazilian plant. It has a series of pharmacological properties: antioxidant, cytotoxic, analgesic, anti-inflammatory, antitumor and antiplatelet. Onco A was associated with magnetite nanoparticles in order to obtain magnetic properties. The components of MO-20 were characterized by XRD, FTIR, TGA, TEM and Magnetization curves. The MO-20 presented a size of about 30 nm and globular morphology. In addition, drug releasing experiments were performed, where it was observed the presence of the anomalous transport. The results found in this work showed the potential of onco A for future applications of the MO-20 as a new magnetic drug release nanosystem for cancer treatment.openBarreto, Antônio C.H.; Santiago, Vivian R.; Freire, Rafael M.; Mazzetto, Selma E.; Denardin, Juliano C.; Mele, Giuseppe; Cavalcante, Igor M.; Ribeiro, Maria E.N.P.; Ricardo, Nágila M.P.S.; Gonçalves, Tamara; Carbone, Luigi; Lemos, Telma L.G.; Pessoa, Otília D.L.; Fechine, Pierre B.A.*Barreto, Antônio C. H.; Santiago, Vivian R.; Freire, Rafael M.; Mazzetto, Selma E.; Denardin, Juliano C.; Mele, Giuseppe; Cavalcante, Igor M.; Ribeiro, Maria E. N. P.; Ricardo, Nágila M. P. S.; Gonçalves, Tamara; Carbone, Luigi; Lemos, Telma L. G.; Pessoa, Otília D. L.; Fechine, Pierre B. A
- …