Low-Temperature Properties of the Sodium-Ion Electrolytes Based on EC-DEC, EC-DMC, and EC-DME Binary Solvents

Sodium-ion batteries are a promising class of secondary power sources that can replace some of the lithium-ion, lead–acid, and other types of batteries in large-scale applications. One of the critical parameters for their potential use is high efficiency in a wide temperature range, particularly below 0 °C. This article analyzes the phase equilibria and electrochemical properties of sodium-ion battery electrolytes that are based on NaPF6 solutions in solvent mixtures of ethylene carbonate and diethyl carbonate (EC:DEC), dimethyl carbonate (EC:DMC), and 1,2-dimethoxyethane (EC:DME). All studied electrolytes demonstrate a decrease in conductivity at lower temperatures and transition to a quasi-solid state resembling “wet snow” at certain temperatures: EC:DEC at −8 °C, EC:DMC at −13 °C, and EC:DME at −21 °C for 1 M NaPF6 solutions. This phase transition affects their conductivity to a different degree. The impact is minimal in the case of EC:DEC, although it partially freezes at a higher temperature than other electrolytes. The EC:DMC-based electrolyte demonstrates the best efficiency at temperatures down to −20 °C. However, upon further cooling, 1 M NaPF6 in EC:DEC retains a higher conductivity and lower resistivity in symmetrical Na3V2(PO4)3-based cells. The temperature range from −20 to −40 °C is characterized by the strongest deterioration in the electrochemical properties of electrolytes: for 1 M NaPF6 in EC:DMC, the charge transfer resistance increased 36 times, and for 1 M NaPF6 in EC:DME, 450 times. For 1 M NaPF6 in EC:DEC, the growth of this parameter is much more modest and amounts to only 1.7 times. This allows us to consider the EC:DEC-based electrolyte as a promising basis for the further development of low-temperature sodium-ion batteries

Lithium Ion Coupled Electron-Transfer Rates in Superconcentrated Electrolytes: Exploring the Bottlenecks for Fast Charge-Transfer Rates with LiMn₂O₄ Cathode Materials

The charge-transfer kinetics of lithium ion intercalation into Li_<i>x</i>Mn₂O₄ cathode materials was examined in dilute and concentrated aqueous and carbonate LiTFSI solutions using electrochemical methods. Distinctive trends in ion intercalation rates were observed between water-based and ethylene carbonate/diethyl carbonate solutions. The influence of the solution concentration on the rate of lithium ion transfer in aqueous media can be tentatively attributed to the process associated with Mn dissolution, whereas in carbonate solutions the rate is influenced by the formation of a concentration-dependent solid electrolyte interface (SEI). Some indications of SEI layer formation at electrode surfaces in carbonate solutions after cycling are detected by X-ray photoelectron spectroscopy. The general consequences related to the application of superconcentrated electrolytes for use in advanced energy storage cathodes are outlined and discussed

Sosnowskyi Hogweed-Based Hard Carbons for Sodium-Ion Batteries

Sodium-ion battery technology rapidly develops in the post-lithium-ion landscape. Among the variety of studied anode materials, hard carbons appear to be the realistic candidates because of their electrochemical performance and relative ease of production. This class of materials can be obtained from a variety of precursors, and the most ecologically important and interesting route is the synthesis from biomass. In the present work, for the first time, hard carbons were obtained from Heracleum sosnowskyi, a highly invasive plant, which is dangerous for humans and can cause skin burns but produces a large amount of green biomass in a short time. We proposed a simple synthesis method that includes the pretreatment stage and further carbonization at 1300 &deg;C. The effect of the pretreatment of giant hogweed on the hard carbon electrochemical properties was studied. Obtained materials demonstrate &gt;220 mAh g&minus;1 of the discharge capacity, high values of the initial Coulombic efficiency reaching 87% and capacity retention of 95% after 100 charge-discharge cycles in sodium half-cells. Key parameters of the materials were examined by means of different analytical, spectroscopic and microscopic techniques. The possibility of using the giant hogweed-based hard carbons in real batteries is demonstrated with full sodium-ion cells with NASICON-type Na3V2(PO4)3 cathode material

Sosnowskyi Hogweed-Based Hard Carbons for Sodium-Ion Batteries

Sodium-ion battery technology rapidly develops in the post-lithium-ion landscape. Among the variety of studied anode materials, hard carbons appear to be the realistic candidates because of their electrochemical performance and relative ease of production. This class of materials can be obtained from a variety of precursors, and the most ecologically important and interesting route is the synthesis from biomass. In the present work, for the first time, hard carbons were obtained from Heracleum sosnowskyi, a highly invasive plant, which is dangerous for humans and can cause skin burns but produces a large amount of green biomass in a short time. We proposed a simple synthesis method that includes the pretreatment stage and further carbonization at 1300 °C. The effect of the pretreatment of giant hogweed on the hard carbon electrochemical properties was studied. Obtained materials demonstrate >220 mAh g−1 of the discharge capacity, high values of the initial Coulombic efficiency reaching 87% and capacity retention of 95% after 100 charge-discharge cycles in sodium half-cells. Key parameters of the materials were examined by means of different analytical, spectroscopic and microscopic techniques. The possibility of using the giant hogweed-based hard carbons in real batteries is demonstrated with full sodium-ion cells with NASICON-type Na3V2(PO4)3 cathode material