Microbubble-enhanced DBD plasma reactor: Design, characterisation and modelling

The emerging field of atmospheric pressure plasmas (APPs) for treatment of various solutions and suspensions has led to a variety of plasma reactors and power sources. This article reports on the design, characterisation and modelling of a novel plasma-microbubble reactor that forms a dielectric barrier discharge (DBD) at the gas-liquid interface to facilitate the transfer of short-lived highly reactive species from the gas plasma into the liquid phase. The use of microbubbles enabled efficient dispersion of long-lived reactive species in the liquid and UVC-induced oxidation reactions are triggered by the plasma radiation at the gas-liquid interface. A numerical model was developed to understand the dynamics of the reactor, and the model was validated using experimental measurements. Fluid velocities in the riser region of the reactor were found to be an order of magnitude higher for smaller bubbles (~500 µm diameter) than for larger bubbles (~2500 µm diameter); hence provided well-mixed conditions for treatment. In addition to other reactive oxygen species (ROS) and reactive nitrogen species (RNS), 2 a dissolved ozone concentration of 3 µM was recoded after a 15-minute operation of the reactor, demonstrating the suitability of this design for various applications

Geometry optimization of linear and annular plasma synthetic jet actuators

The Electro-Hydro-Dynamic (EHD) interaction induced in atmospheric-pressure air by a surface Dielectric Barrier Discharge (DBD) actuator has been experimentally investigated. Plasma Synthetic Jets Actuators (PSJAs) are DBD actuators able to induce an air stream, perpendicular to the actuator surface. These devices can be used in the aerodynamics field to prevent or induce flow separation, modify the laminar to turbulent transition inside the boundary layer, and stabilize or mix air flows. They can also be used to enhance indirect plasma treatment effects, increasing the reactive species delivery rate onto surfaces and liquids. This can play a major role in plasma processing and chemical kinetics modelling, where only diffusive mechanisms are often considered. This paper reports on the importance that different electrode geometries can have on the performance of different PSJAs. A series of DBD aerodynamic actuators designed to produce perpendicular jets have been fabricated on 2-layer printed circuit boards (PCBs). Linear and annular geometries have been considered, testing different upper electrode distances in the linear case and different diameters in the annular one. AC voltage supplied at 11.5 kV peak and 5 kHz frequency has been used. Lower electrodes were connected to ground and buried in epoxy resin to avoid undesired plasma generation on the lower actuator surface. Voltage and current measurements have been carried out to evaluate the active power delivered to the discharges. Schlieren imaging allowed to visualize the induced jets and gave an estimate of their evolution and geometry. Pitot tube measurements were performed to obtain the PSJAs’ velocity profiles and to estimate the mechanical power delivered to the fluid. Optimal values of the inter-electrode distance and diameter have been found in order to maximize jet velocity, mechanical power or efficiency. Annular geometries are found to achieve the best performances

EHD-driven mass transport enhancement in surface dielectric barrier discharges

Surface Dielectric Barrier Discharges (S-DBDs) have received renewed attention in recent years for their potential application in emerging biomedical, environmental and agricultural applications. In most of these applications, the plasma is not in direct contact with the substrate being treated and the transport of reactive species from the plasma to the substrate is typically assumed to be controlled by diffusion. Here, we demonstrate that generally this is not the case and that electrohydrodynamic (EHD) forces can produce jets that enhance the delivery of these species, thereby influencing the efficacy of the S-DBD device. In particular, we have studied the degradation of potassium indigotrisulfonate solutions exposed to S-DBDs generated in devices with annular electrodes of diameters varying between 10mm and 50mm. All the devices were driven at constant linear power density (Watts per cm of plasma length) and although local plasma properties remained the same in all the devices, a three-fold efficacy enhancement was observed for devices of diameter ~30mm due to EHD effects

A microbubble plasma reactor for pretreatment of lignocellulosic biomass [Abstract]

A microbubble plasma reactor for pretreatment of lignocellulosic biomass [Abstract