7 research outputs found
Core-Sheath Electrospun Nanofibers Based on Chitosan and Cyclodextrin Polymer for the Prolonged Release of Triclosan
International audienceThis work focuses on the manufacture of core-sheath nanofibers (NFs) based on chitosan (CHT) as sheath and cyclodextrin polymer (PCD) as core and loaded with triclosan (TCL). In parallel, monolithic NFs consisting of blended CHT-PCD and TCL were prepared. Nanofibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier Transform Infrared spectroscopy (FTIR). SEM displayed the morphology of NFs and the structure of the nanowebs, while TEM evidenced the core-sheath structure of NFs prepared by coaxial electrospinning. The core diameters and sheath thicknesses were found dependent on respective flow rates of both precursor solutions. Nanofibers stability and TCL release in aqueous medium were studied and correlated with the antibacterial activity against Staphylococcus aureus and Escherichia coli. Results showed that the release profiles of TCL and therefore the antibacterial activity were directly related to the type of nanofibers. In the case of monolithic nanofibers, the NFs matrix was composed of polyelectrolyte complex (PEC formed between CHT and PCD) and resulted in a prolonged release of TCL and a sustained antibacterial effect. In the case of core-sheath NFs, the PEC was formed only at the core-sheath interface, leading to less stable NFs and therefore to a faster release of TCL, and to a less extended antibacterial activity compared to monolithic ones
Relaxometry, Luminescence Measurement, Electrophoresis, and Animal Biodistribution of Lanthanide(III) Complexes of Some Polyaza Macrocyclic Acetates Containing Pyridine
Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes
International audienceInfections represent a major medical concern and have severe impact on the public health economy. Antimicrobial coatings represent one major solution and are the subject of many investigations in academic and industrial research. Polyelectrolyte multilayers (PEMs) consist in the step-by-step deposition of polyanions and polycations films on surfaces. The wide range of disposable polyelectrolytes makes this approach among the most versatile methods as it allows to design surfaces that prevent bacterial adhesion, and kill bacteria by contact or by releasing antibacterial agents. The present work focused on the release-killing effect of an active PEM coating of a polyethylene terephthalate (PET) textile support. This activity was obtained thanks to the PEM film build up using cationic and anionic polyelectrolytes both based on cyclodextrins (PCD- and PCD+) that provided a reservoir property and prolonged release of triclosan (TCS). To this effect, a PET non-woven preliminarily modified with carboxylate groups by applying a thermofixation process was then treated by dip-coating, alternating soaking cycles in cationic PCD+ and in anionic PCD- solutions. Samples coated with such PEM film were then loaded with TCS whose release was assessed in dynamic mode in a phosphate buffered saline solution (PBS) at 37 °C. In parallel, TCS/PCD+ and TCS/PCD- interactions were investigated by Nuclear Magnetic Resonance (NMR) and phase solubility study, and the biocide activity was assessed against S. aureus and E. coli. Finally, the present study has demonstrated that our PCD+/PCD- PEM system presented release-killing properties that supplement the contact-killing effect of this system that was reported in a previous paper
Intercalation of Ciprofloxacin in Naturally Occurring Smectite from Bana: Potentiality as Drug Delivery System and Antimicrobial Effects on Escherichia coli and Staphylococcus aureus
International audienceCiprofloxacin (CFX) was loaded on Bana clay (Cameroon) and CFX loadedclayshave been evaluated as drug delivery system. Raw clays and CFX loadedcompounds have been characterized by some physico-chemicals methods. Invitro release studies have been done in gastric and phosphate buffer experimentalmediums; bacteriological studies have been made up on Escherichia coliand Staphylococcus aureus. X-ray diffractometry patterns of loaded compoundsshow a basal spacing increasing due to CFX intercalation. On Fourier-TransformedInfrared spectrometry spectra, appearance of CFX characteristic bandsand shifting of certain bands already presents on clay confirmed CFX intercalation.After 96 h of CFX released from release mediums, prolonged and continueprofiles have been observed. Diffusion tests displayed an inhibition radiusof ~2 cm on gelose seeded with Escherichia coli and Staphylococcus aureusdue to CFX. The overall results show a modified release of ciprofloxacinwith an effective antibacterial activity, giving the way for a new ciprofloxacindrug delivery system using Bana clay as carrier
Structures and Dynamics of Lanthanide(III) Complexes of Sugar-Based DTPA-bis(amides) in Aqueous Solution: A Multinuclear NMR Study
Injectable Chitosan-Based Hydrogels for Trans-Cinnamaldehyde Delivery in the Treatment of Diabetic Foot Ulcer Infections
International audienceDiabetic foot ulcers (DFU) are among the most common complications in diabetic patients and affect 6.8% of people worldwide. Challenges in the management of this disease are decreased blood diffusion, sclerotic tissues, infection, and antibiotic resistance. Hydrogels are now being used as a new treatment option since they can be used for drug delivery and to improve wound healing. This project aims to combine the properties of hydrogels based on chitosan (CHT) and the polymer of β cyclodextrin (PCD) for local delivery of cinnamaldehyde (CN) in diabetic foot ulcers. This work consisted of the development and characterisation of the hydrogel, the evaluation of the CN release kinetics and cell viability (on a MC3T3 pre-osteoblast cell line), and the evaluation of the antimicrobial and antibiofilm activity (S. aureus and P. aeruginosa). The results demonstrated the successful development of a cytocompatible (ISO 10993-5) injectable hydrogel with antibacterial (99.99% bacterial reduction) and antibiofilm activity. Furthermore, a partial active molecule release and an increase in hydrogel elasticity were observed in the presence of CN. This leads us to hypothesise that a reaction between CHT and CN (a Schiff base) can occur and that CN could act as a physical crosslinker, thus improving the viscoelastic properties of the hydrogel and limiting CN release
Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention
International audienceThe main cause of failure of angioplasty stenting is restenosis due to neointimal hyperplasia, a too high proliferation of smooth muscle cells (SMC). The local and sustained delivery of selective pleiotropic drugs to limit SMC proliferation seems to be the hopeful solution to minimize this post surgery complication. The aim of this study is to develop a stent covered by nanofibers (NFs) produced by electrospinning, loaded with simvastatin (SV), a drug commonly used for restenosis prevention. NFs were prepared from the electrospinning of a solution containing SV and a mixture of chitosan (cationic) and β-cyclodextrin (CD) polymer (anionic) which form together a polyelectrolyte complex that makes up the NFs matrix. First, the SV/CD interactions were studied by phase solubility diagram, DRX and DSC. The electrospinning process was then optimized to cover a self-expandable NiTiNOL stent and the mechanical resistance of the NFs sheath upon its introduction inside the delivery catheter was considered, using a crimper apparatus. The morphology, coating thicknesses and diameters of nanofibers were studied by scanning electron microscopy. The SV loading rates on the stents were controlled by the electrospinning time, and the presence of SV in the NFs was confirmed by FTIR. NFs stability in PBS pH 7.4 buffer could be improved after thermal post-treatment of NFs and in vitro release of SV in dynamic conditions demonstrated that the release profiles were influenced by the presence of CD polymer in NFs and by the thickness of the NFs sheath. Finally, a covered stent delivering 3 µg/mm2 of SV within 6 h was obtained, whose efficiency will be investigated in a further in vivo study