Laterally unrestrained bearing strength of hot-wet conditioned pultruded FRP material

Presented in this paper are test results of a study pertaining to the reduction in bearing strength due to the effect of hot-wet conditioning on specimens cut from a polyester matrix based pultruded FRP structural shape. A total of 100 coupons (for 20 batches of five) were immersed in distilled water for three and six months at a constant temperature of 40°C. Subsequently, they were load tested using stainless steel ‘pins’ of M10 and M20 sizes with material orientations of 0o, 45o and 90o to the direction of pultrusion. Furthermore, this test series considered the effect of loading with and without bolt thread in the bearing zone. Testing employed a non-standard set-up that accommodates smaller test coupons, allowing material to be sourced from the web and flange of a 254×254×9.53 mm wide flange shape. An evaluation of the salient results provides characteristic bearing strength values (in accordance with Annex D of EN1990) and comparisons are drawn between equivalent strengths for non-aged (zero months) material from a previous test series. The degree of strength reduction is found to be influenced by both the ‘pin’ size and type, and observations are drawn towards the safe and reliable design of bolted connections

Synthesis of TiO2(110) ultra-thin films on W(100) and their reactions with H2O

We present a study of the growth and reactivity of ultra-thin films of TiO2 grown on W(100). Three approaches to film growth are investigated, each resulting in films that show order in low-energy diffraction (LEED) and a low level of non-stoichiometry in X-ray photoelectron spectroscopy (XPS). H2O is used as a probe of the reactivity of the films, with changes in the Ti 2p and O 1s core levels being monitored by XPS. Evidence for the dissociation of H2O on the TiO2(110) ultra-thin film surface is adduced. These results are discussed with reference to related studies on native TiO2(110)

Trigeminal neuralgia: a practical guide

Trigeminal neuralgia (TN) is a highly disabling disorder characterised by very severe, brief and electric shock like recurrent episodes of facial pain. New diagnostic criteria, which subclassify TN on the basis of presence of trigeminal neurovascular conflict or an underlying neurological disorder, should be used as they allow better characterisation of patients and help in decision-making regarding medical and surgical treatments. MR, including high-resolution trigeminal sequences, should be performed as part of the diagnostic work-up. Carbamazepine and oxcarbazepine are drugs of first choice. Lamotrigine, gabapentin, pregabalin, botulinum toxin type A and baclofen can be used either alone or as add-on therapy. Surgery should be considered if the pain is poorly controlled or the medical treatments are poorly tolerated. Trigeminal microvascular decompression is the first-line surgery in patients with trigeminal neurovascular conflict while neuroablative surgical treatments can be offered if MR does not show any neurovascular contact or where patients are considered too frail for microvascular decompression or do not wish to take the risk

Surface science of ultrathin metal oxide films

The properties of metal oxide surfaces are key to their diverse technological applications. However, the semiconducting nature of metal oxides presents a problem - many surface science techniques are electron based and thus require samples to be conducting. As such, bulk crystal studies of metal oxides by techniques such as photoemission spectroscopy (PES) and scanning tunneling microscopy (STM) are limited to reduced surfaces. Alternatively, thin �films of a metal oxide can be synthesised on a suitable conducting substrate that mimic the bulk crystal surface whilst having sufficient conducting character to use these techniques. CeO2 is an important material found in three-way catalysts that remove pollutants from the exhaust gas of modern automobiles. Key to this application is the ability of reduced ceria to store and release oxygen depending on the composition of the exhaust. The addition of noble metals such as Pd to the ceria surface greatly improves the efficiency of pollutant conversion evidenced by X-ray photoelectron spectroscopy (XPS) by reducing the ceria. Resonance photoemission spectroscopy (RESPES) has been used to investigate the e�ect of Pd on ceria CeO2-x(110) thin �films grown on a Pt(111) substrate. RESPES is more surface speci�fic than XPS and thus reveals more information on the surface layers of ceria �films. TiO2(110) is the most studied metal oxide surface, and has a multitude of applications. Its chemistry with two of the most abundant chemical species - water (H2O) and oxygen (O2) - is thus very important. H2O has been shown to dissociate on TiO2 surfaces. TiO2 thin �films grown on W(100) were used as model system to study the chemistry of the reaction between TiO2 and H2O, and subsequently the reaction of hydrated surfaces with O2 using XPS. STM was used to examine the morphology of TiO2(110) �films grown on W(100)-(2 x 1)-O, changes with fi�lm thickness and methods of improving surface smoothness. The �first detailed STM images showing row structure of TiO2(110) �films grown on W are shown

Virtual characterization of delamination failures in pultruded GFRP angles

This paper deals with the application of cohesive zone models to study delamination failures in leg-angles of pultruded glass fibre reinforced polymer material using the general-purpose finite element software Abaqus. The objective of the study is present a finite element modelling methodology that can, for example, help to fill-in knowledge gaps in the available experimental data pertaining to the tying force resistance of angle-cleated jointing in frame construction. It may be used to optimize cleat shape and laminate lay-up (dependent on composite processing method) for the strongest cleat against a minimum cost requirement. A benchmark example taken from literature is used to show that the numerical predictions from the authors’ simulations are reliable. The approach is next used to analyse an equal leg-angle component where one leg is fixed and the other orthogonal leg is being deformed by a tensile force applied over the free end surface. Numerical results from Abaqus are used to show that a lamination produced by the pultrusion processing method fails unstably by delamination cracks radiating around the curved region and extending into the leg panels. As a preliminary study to show the potential of the new modelling methodology it is used to show the influence of the radius of curvature at the junction between the legs on the tying force resistance; based on the load at delamination onset a smaller radius reduces the cleat’s strength

The influence of eating psychopathology on autobiographical memory specificity and social problem-solving

The primary aim was to examine to influence of subclinical disordered eating on autobiographical memory specificity (AMS) and social problem solving (SPS). A further aim was to establish if AMS mediated the relationship between eating psychopathology and SPS. A non-clinical sample of 52 females completed the autobiographical memory test (AMT), where they were asked to retrieve specific memories of events from their past in response to cue words, and the means-end problem-solving task (MEPS), where they were asked to generate means of solving a series of social problems. Participants also completed the Eating Disorders Inventory (EDI) and Hospital Anxiety and Depression Scale. After controlling for mood, high scores on the EDI subscales, particularly Drive-for-Thinness, were associated with the retrieval of fewer specific and a greater proportion of categorical memories on the AMT and with the generation of fewer and less effective means on the MEPS. Memory specificity fully mediated the relationship between eating psychopathology and SPS. These findings have implications for individuals exhibiting high levels of disordered eating, as poor AMS and SPS are likely to impact negatively on their psychological wellbeing and everyday social functioning and could represent a risk factor for the development of clinically significant eating disorders

Prevalence of familial cluster headache: a systematic review and meta-analysis

INTRODUCTION: The population rate of familial cluster headache (CH) has been reported to be as high as 20% however this varies considerably across studies. To obtain a true estimate of family history in CH, we conducted a systematic review and meta-analysis of previously published data. METHODS: Our systematic review involved a search of electronic databases (Medline, EMBASE, PubMed, CINAHL) to identify and appraise studies of interest utilising the PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines. To further ameliorate the accuracy of our analysis we included an additional unpublished cohort of CH patients recruited at a tertiary referral centre for headache, who underwent detailed family history with diagnostic verification in relatives. Data was extracted and meta-analysis conducted to provide a true estimation of family history. RESULTS: In total, we identified 7 studies which fulfilled our inclusion criteria. The estimated true prevalence of CH patients with a positive family history was 6.27% (95% CI:4.65-8.40%) with an overall I2 of 73%. Fitted models for gender subgroups showed higher estimates 9.26% (95% CI: 6.29-13.43%) in females. However the I2 for the female model was 58.42% and significant (p = 0.047). CONCLUSION: Our findings estimate a rate of family history in CH to be approximately 6.27% (95% CI: 4.65-8.40%). While estimates were larger for female probands, we demonstrated high heterogeneity in this subgroup. These findings further support a genetic role in the aetiology of CH

Cytokines in primary headache disorders: a systematic review and meta-analysis

BACKGROUND: The role of inflammation and cytokines in the pathophysiology of primary headache disorders is uncertain. We performed a systematic review and meta-analysis to synthesise the results of studies comparing peripheral blood cytokine levels between patients with migraine, tension-type headache, cluster headache, or new daily persistent headache (NDPH), and healthy controls; and in migraine between the ictal and interictal stages. METHODS: We searched PubMed/Medline and Embase from inception until July 2022. We included original research studies which measured unstimulated levels of any cytokines in peripheral blood using enzyme-linked immunosorbent assay or similar assay. We assessed risk of bias using the Newcastle-Ottawa Quality Assessment Scale. We used random effects meta-analysis with inverse variance weighted average to calculate standardised mean difference (SMD), 95% confidence intervals, and heterogeneity for each comparison. This study is registered with PROSPERO (registration number CRD42023393363). No funding was received for this study. RESULTS: Thirty-eight studies, including 1335 patients with migraine (32 studies), 302 with tension-type headache (nine studies), 42 with cluster headache (two studies), and 1225 healthy controls met inclusion criteria. Meta-analysis showed significantly higher interleukin (IL)-6 (SMD 1.07, 95% CI 0.40-1.73, p = 0.002), tumour necrosis factor (TNF)-α (SMD 0.61, 95% CI 0.14-1.09, p = 0.01), and IL-8 (SMD 1.56, 95% CI 0.03-3.09, p = 0.04), in patients with migraine compared to healthy controls, and significantly higher interleukin-1β (IL-1β) (SMD 0.34, 95% CI 0.06-0.62, p = 0.02) during the ictal phase of migraine compared to the interictal phase. Transforming growth factor (TGF)-β (SMD 0.52, 95% CI 0.18-0.86, p = 0.003) and TNF-α (SMD 0.64, 95% CI 0.33-0.96, p = 0.0001) were both higher in patients with tension-type headache than controls. CONCLUSIONS: The higher levels of the proinflammatory cytokines IL-6, IL-8 and TNF-α in migraine compared to controls, and IL-1β during the ictal stage, suggest a role for inflammation in the pathophysiology of migraine, however prospective studies are required to confirm causality and investigate the mechanisms for the increase in cytokine levels identified. Cytokines may also have a role in tension-type headache. Due a lack of data, no conclusions can be made regarding cluster headache or NDPH

New daily persistent headache: A systematic review and meta-analysis

OBJECTIVE: To perform a systematic review and meta-analysis of the epidemiology, precipitants, phenotype, comorbidities, pathophysiology, treatment, and prognosis of primary new daily persistent headache. METHODS: We searched PubMed/Medline, EMBASE, Cochrane, and clinicaltrials.gov until 31 December 2022. We included original research studies with any design with at least five participants with new daily persistent headache. We assessed risk of bias using National Institutes of Health Quality Assessment Tools. We used random-effects meta-analysis where suitable to calculate pooled estimates of proportions. The Preferred Reporting Items for Systematic Reviews and Meta-Analysis compliant study is registered with PROSPERO (registration number CRD42022383561). RESULTS: Forty-six studies met inclusion criteria, predominantly case series, including 2155 patients. In 67% (95% CI 57-77) of cases new daily persistent headache has a chronic migraine phenotype, however new daily persistent headache has been found to be less likely than chronic migraine to be associated with a family history of headache, have fewer associated migrainous symptoms, be less vulnerable to medication overuse, and respond less well to injectable and neuromodulatory treatments. CONCLUSIONS: New daily persistent headache is a well described, recognisable disorder, which requires further research into its pathophysiology and treatment. There is a lack of high-quality evidence and, until this exists, we recommend continuing to consider new daily persistent headache a distinct disorder