836 research outputs found
A Study of Linear Approximation Techniques for SAR Azimuth Processing
The application of the step transform subarray processing techniques to synthetic aperture radar (SAR) was studied. The subarray technique permits the application of efficient digital transform computational techniques such as the fast Fourier transform to be applied while offering an effective tool for range migration compensation. Range migration compensation is applied at the subarray level, and with the subarray size based on worst case range migration conditions, a minimum control system is achieved. A baseline processor was designed for a four-look SAR system covering approximately 4096 by 4096 SAR sample field every 2.5 seconds. Implementation of the baseline system was projected using advanced low power technologies. A 20 swath is implemented with approximately 1000 circuits having a power dissipation of from 70 to 195 watts. The baseline batch step transform processor is compared to a continuous strip processor, and variations of the baseline are developed for a wide range of SAR parameters
Advanced digital SAR processing study
A highly programmable, land based, real time synthetic aperture radar (SAR) processor requiring a processed pixel rate of 2.75 MHz or more in a four look system was designed. Variations in range and azimuth compression, number of looks, range swath, range migration and SR mode were specified. Alternative range and azimuth processing algorithms were examined in conjunction with projected integrated circuit, digital architecture, and software technologies. The advaced digital SAR processor (ADSP) employs an FFT convolver algorithm for both range and azimuth processing in a parallel architecture configuration. Algorithm performace comparisons, design system design, implementation tradeoffs and the results of a supporting survey of integrated circuit and digital architecture technologies are reported. Cost tradeoffs and projections with alternate implementation plans are presented
Soliton approximation in continuum models of leader-follower behavior
Complex biological processes involve collective behavior of entities
(bacteria, cells, animals) over many length and time scales and can be
described by discrete models that track individuals or by continuum models
involving densities and fields. We consider hybrid stochastic agent-based
models of branching morphogenesis and angiogenesis (new blood vessel creation
from pre-existing vasculature), which treat cells as individuals that are
guided by underlying continuous chemical and/or mechanical fields. In these
descriptions, leader (tip) cells emerge from existing branches and follower
(stalk) cells build the new sprout in their wake. Vessel branching and fusion
(anastomosis) occur as a result of tip and stalk cell dynamics. Coarse-graining
these hybrid models in appropriate limits produces continuum partial
differential equations (PDEs) for endothelial cell densities that are more
analytically tractable. While these models differ in nonlinearity, they produce
similar equations at leading order when chemotaxis is dominant. We analyze this
leading order system in a simple quasi-one-dimensional geometry and show that
the numerical solution of the leading order PDE is well described by a soliton
wave that evolves from vessel to source. This wave is an attractor for
intermediate times until it arrives at the hypoxic region releasing the growth
factor. The mathematical techniques used here thus identify common features of
discrete and continuum approaches and provide insight into general biological
mechanisms governing their collective dynamics.Comment: 13 pages, 9 figure
Mortality associated with delays between clinic entry and ART initiation in resource-limited settings: results of a transition-state model.
OBJECTIVE: To estimate the mortality impact of delay in antiretroviral therapy (ART) initiation from the time of entry into care. DESIGN: A state-transition Markov process model. This technique allows for assessing mortality before and after ART initiation associated with delays in ART initiation among a general population of ART-eligible patients without conducting a randomized trial. METHODS: We used patient-level data from 3 South African cohorts to determine transition probabilities for pre-ART CD4 count changes and pre-ART and on-ART mortality. For each parameter, we generated probabilities and distributions for Monte Carlo simulations with 1-week cycles to estimate mortality 52 weeks from clinic entry. RESULTS: We estimated an increase in mortality from 11.0% to 14.7% (relative increase of 34%) with a 10-week delay in ART for patients entering care with our pre-ART cohort CD4 distribution. When we examined low CD4 ranges, the relative increase in mortality delays remained similar; however, the absolute increase in mortality rose. For example, among patients entering with CD4 count 50-99 cells per cubic millimeter, 12-month mortality increased from 13.3% with no delay compared with 17.0% with a 10-week delay and 22.9% with a 6-month delay. CONCLUSIONS: Delays in ART initiation, common in routine HIV programs, can lead to important increases in mortality. Prompt ART initiation for patients entering clinical care and eligible for ART, especially those with lower CD4 counts, could be a relatively low-cost approach with a potential marked impact on mortality
Superconducting-coil--resistor circuit with electric field quadratic in the current
It is shown for the first time that the observed [Phys. Lett. A 162 (1992)
105] potential difference Phi_t between the resistor and the screen surrounding
the circuit is caused by polarization of the resistor because of the kinetic
energy of the electrons of the superconducting coil. The proportionality of
Phi_t to the square of the current and to the length of the superconducting
wire is explained. It is pointed out that measuring Phi_t makes it possible to
determine the Fermi quasimomentum of the electrons of a metal resistor.Comment: 2 pages, 1 figur
Recommended from our members
A Remote Characterization System and a fault-tolerant tracking system for subsurface mapping of buried waste sites
This paper describes two closely related projects that will provide new technology for characterizing hazardous waste burial sites. The first project, a collaborative effort by five of the national laboratories, involves the development and demonstration of a remotely controlled site characterization system. The Remote Characterization System (RCS) includes a unique low-signature survey vehicle, a base station, radio telemetry data links, satellite-based vehicle tracking, stereo vision, and sensors for noninvasive inspection of the surface and subsurface. The second project, conducted by the Idaho National Engineering Laboratory (INEL), involves the development of a position sensing system that can track a survey vehicle or instrument in the field. This system can coordinate updates at a rate of 200/s with an accuracy better than 0.1% of the distance separating the target and the sensor. It can employ acoustic or electromagnetic signals in a wide range of frequencies and can be operated as a passive or active device
3D characterization of CdSe nanoparticles attached to carbon nanotubes
The crystallographic structure of CdSe nanoparticles attached to carbon
nanotubes has been elucidated by means of high resolution transmission electron
microscopy and high angle annular dark field scanning transmission electron
microscopy tomography. CdSe rod-like nanoparticles, grown in solution together
with carbon nanotubes, undergo a morphological transformation and become
attached to the carbon surface. Electron tomography reveals that the
nanoparticles are hexagonal-based with the (001) planes epitaxially matched to
the outer graphene layer.Comment: 7 pages, 8 figure
Relativistic calculations of the lifetimes and hyperfine structure constants in Zn
This work presents accurate {\it ab initio} determination of the magnetic
dipole (M1) and electric quadrupole (E2) hyperfine structure constants for the
ground and a few low-lying excited states in Zn, which is one of
the interesting systems in fundamental physics. The coupled-cluster (CC) theory
within the relativistic framework has been used here in this calculations. Long
standing demands for a relativistic and highly correlated calculations like CC
can be able to resolve the disagreements among the lifetime estimations
reported previously for a few low-lying states of Zn. The role of
different electron correlation effects in the determination of these quantities
are discussed and their contributions are presented.Comment: 9 pages, 1 figure. submitted to J. Phys. B Fast Trac
Combined CI+MBPT calculations of energy levels and transition amplitudes in Be, Mg, Ca, and Sr
Configuration interaction (CI) calculations in atoms with two valence
electrons, carried out in the V(N-2) Hartree-Fock potential of the core, are
corrected for core-valence interactions using many-body perturbation theory
(MBPT). Two variants of the mixed CI+MBPT theory are described and applied to
obtain energy levels and transition amplitudes for Be, Mg, Ca, and Sr
Artificial Intelligence
Contains research objectives and reports on eight research projects.Computation Center, M.I.T
- …