76 research outputs found
Organic Bulk Heterojunction Solar Cells: Materials Properties Device Stability And Performance
In the field of Photovoltaic technologies the organic solar cells are particularly attractive because of their ease of processing, mechanical flexibility and potential low cost production techniques. So far, the reported efficiencies are not high enough to allow to be competitive in the market, however with the introduction of new photoactive materials, device architectures and light management structures, the power conversion efficiencies, at laboratory scale, has rapidly reached the 12%, showing a great potential and a bright future for organic solar cells. Nevertheless, in view of commercial products, two main problems are still unresolved: the relatively low performance of the modules and their lifetime. In sight of this, the present Ph.D thesis has a double goal: 1) a better understanding of the relationship between devices performance and photoactive materials structures 2) a deep investigation on device degradation processes, with particular attention on the effects induced by temperature and incident light. As a result, promising approaches to further optimize the polymer’s optoelectrial properties, and thus the corresponding device performance, are proposed. About the lifetime, first the thermal degradation mechanisms involved on the active layer was investigated and it has been demonstrated the role of the other layers and interfaces in the solar cell thermal stability. In this contest an innovative fast capacitance based thermal test has been developed in order to obtain information regarding the limit operating temperature above which the device becomes thermally unstable. In the end, a preliminary study on the photostability issue was carried out demostrating that the photodegradation of organic solar cells not depends just on the photostability of the donor polymer, but is connected also with the composition of the active layer solution and on the interaction with the adjacent layers. Solutions to limit or prevent the devices degradation processes are proposed
Fully Textile X-Ray Detectors Based on Fabric-Embedded Perovskite Crystals
The interest and thrust for wearable ionizing radiation dosimeters are rapidly growing, stimulated by a large number of different applications impacting on humankind, spanning from medicine to civil security and space missions. Lead halide perovskites are considered one of the most promising classes of novel materials for X-ray detectors due to their superior electronic and detection performance coupled with compatibility with solution-based printing processes, allowing fabrication onto flexible substrates. It is reported on fully textile perovskite-based direct X-ray detectors, where the photoactive layer is constituted by a silk-satin fabric functionalized with methylammonium lead bromide perovskite crystals embedded in the textile. The reliability of the proposed fabrication process, based on simple and low-tech deposition techniques adaptable to industrial printing technologies for textiles, is assessed by realizing different detector's architectures that exhibit comparable detection performances. Sensitivity values up to (12.2 +/- 0.6) mu C Gy(-1) cm(-2) and a limit of detection down to 3 mu Gy s(-1) are achieved, and low bias operation (down to 1 V) is demonstrated, validating wearable applications. Further, fully textile pixelated matrix X-ray sensors are implemented and tested, providing the proof of principle for large-area scalability
Oxygen Gas Sensing Using a Hydrogel-Based Organic Electrochemical Transistor for Work Safety Applications
open8noOxygen depletion in confined spaces represents one of the most serious and underestimated dangers for workers. Despite the existence of several commercially available and widely used gas oxygen sensors, injuries and deaths from reduced oxygen levels are still more common than for other hazardous gases. Here, we present hydrogel-based organic electrochemical transistors (OECTs) made with the conducting polymer poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) as wearable and real-time oxygen gas sensors. After comparing OECT performances using liquid and hydrogel electrolytes, we identified the best PEDOT:PSS active layer and hydrogel coating (30 µm) combination for sensing oxygen in the concentration range of 13–21% (v/v), critical for work safety applications. The fast O2 solubilization in the hydrogel allowed for gaseous oxygen transduction in an electrical signal thanks to the electrocatalytic activity of PEDOT:PSS, while OECT architecture amplified the response (gain ̴ 104). OECTs proved to have comparable sensitivities if fabricated on glass and thin plastic substrates, (−12.2 ± 0.6) and (−15.4 ± 0.4) µA/dec, respectively, with low power consumption (<40 µW). Sample bending does not influence the device response, demonstrating that our real-time conformable and lightweight sensor could be implemented as a wearable, noninvasive safety tool for operators working in potentially hazardous confined spaces.The work was supported by the European Union FESR FSE, PON Research and Innovation 2014-2020 and FSC, project number ARS01-00996 "TEXT-STYLENuovi tessuti intelligenti e sostenibilimultisettoriali per il design creative e stileMade-in-Italy" and by the Italian Ministry of Economic Development 2020-Project "AlmaMater patents-Monitoraggio in continuo di pH e idratazione-MIRAGE".openFrancesco Decataldo, Filippo Bonafè, Federica Mariani, Martina Serafini, Marta Tessarolo, Isacco Gualandi, Erika Scavetta, Beatrice FraboniFrancesco Decataldo, Filippo Bonafè, Federica Mariani, Martina Serafini, Marta Tessarolo, Isacco Gualandi, Erika Scavetta, Beatrice Frabon
Smart Bandaid Integrated with Fully Textile OECT for Uric Acid Real-Time Monitoring in Wound Exudate
: Hard-to-heal wounds (i.e., severe and/or chronic) are typically associated with particular pathologies or afflictions such as diabetes, immunodeficiencies, compression traumas in bedridden people, skin grafts, or third-degree burns. In this situation, it is critical to constantly monitor the healing stages and the overall wound conditions to allow for better-targeted therapies and faster patient recovery. At the moment, this operation is performed by removing the bandages and visually inspecting the wound, putting the patient at risk of infection and disturbing the healing stages. Recently, new devices have been developed to address these issues by monitoring important biomarkers related to the wound health status, such as pH, moisture, etc. In this contribution, we present a novel textile chemical sensor exploiting an organic electrochemical transistor (OECT) configuration based on poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) for uric acid (UA)-selective monitoring in wound exudate. The combination of special medical-grade textile materials provides a passive sampling system that enables the real-time and non-invasive analysis of wound fluid: UA was detected as a benchmark analyte to monitor the health status of wounds since it represents a relevant biomarker associated with infections or necrotization processes in human tissues. The sensors proved to reliably and reversibly detect UA concentration in synthetic wound exudate in the biologically relevant range of 220-750 μM, operating in flow conditions for better mimicking the real wound bed. This forerunner device paves the way for smart bandages integrated with real-time monitoring OECT-based sensors for wound-healing evaluation
High-Endurance Long-Term Potentiation in Neuromorphic Organic Electrochemical Transistors by PEDOT:PSS Electrochemical Polymerization on the Gate Electrode
The brain exhibits extraordinary information processing capabilities thanks to neural networks that can operate in parallel with minimal energy consumption. Memory and learning require the creation of new neural networks through the long-term modification of the structure of the synapses, a phenomenon called long-term plasticity. Here, we use an organic electrochemical transistor to simulate long-term potentiation and depotentiation processes. Similarly to what happens in a synapse, the polymerization of the 3,4-ethylenedioxythiophene (EDOT) on the gate electrode modifies the structure of the device and boosts the ability of the gate potential to modify the conductivity of the channel. Operando AFM measurements were carried out to demonstrate the correlation between neuromorphic behavior and modification of the gate electrode. Long-term enhancement depends on both the number of pulses used and the gate potential, which generates long-term potentiation when a threshold of +0.7 V is overcome. Long-term depotentiation occurs by applying a +3.0 V potential and exploits the overoxidation of the deposited PEDOT:PSS. The induced states are stable for at least 2 months. The developed device shows very interesting characteristics in the field of neuromorphic electronics
A wearable sensor for monitoring neurotransmitters in sweat for therapeutic and diagnostic analyses
A novel Bioelectronic pH sensor with enhanced sensitivity based on an Organic Electrochemical Transistor
LOW COST ALL-PLASTIC ELECTRO-CHEMICAL SENSOR FOR THE SELECTIVE DETECTION OF CHEMICAL BIO-MARKERS
We developed Organic Electro-Chemical Transistors (OECTs) for the selective detection of active bio-molecules in body fluids (adrenaline, dopamine and ascorbic acid). In OECTs, the current flows in a stripe of conductive polymer and is modulated through the voltage applied to the gate electrode by electrochemical reactions that take place in an electrolytic solution. The transistor configuration, fully based on a conductive polymer, allows to obtain low cost and flexible devices that require low power consumption and a simple readout electronics, enabling the possibility to integrate them as bio-sensors in the daily life of a patient for physiological monitoring
- …