Autonomous spacecraft maintenance study group

A plan to incorporate autonomous spacecraft maintenance (ASM) capabilities into Air Force spacecraft by 1989 is outlined. It includes the successful operation of the spacecraft without ground operator intervention for extended periods of time. Mechanisms, along with a fault tolerant data processing system (including a nonvolatile backup memory) and an autonomous navigation capability, are needed to replace the routine servicing that is presently performed by the ground system. The state of the art fault handling capabilities of various spacecraft and computers are described, and a set conceptual design requirements needed to achieve ASM is established. Implementations for near term technology development needed for an ASM proof of concept demonstration by 1985, and a research agenda addressing long range academic research for an advanced ASM system for 1990s are established

X-ray Emission from the 3C 273 Jet

We present results from four recent Chandra monitoring observations of the jet in 3C 273 using the ACIS detector, obtained between November 2003 and July 2004. We find that the X-ray emission comes in two components: unresolved knots that are smaller than the corresponding optically emitting knots and a broad channel that is about the same width as the optical interknot region. We compute the jet speed under the assumption that the X-ray emission is due to inverse Compton scattering of the cosmic microwave background, finding that the dimming of the jet X-ray emission to the jet termination relative to the radio emission may be due to bulk deceleration.Comment: 2 pages, 2 figures, to appear in the proceedings of "The X-ray Universe 2005", San Lorenzo de El Escorial (Spain), 26-30 September 200

Zinc depolarized electrochemical CO2 concentration

Two zinc depolarized electrochemical carbon dioxide concentrator concepts were analytically and experimentally evaluated for portable life support system carbon dioxide (CO2) removal application. The first concept, referred to as the zinc hydrogen generator electrochemical depolarized CO2 concentrator, uses a ZHG to generate hydrogen for direct use in an EDC. The second concept, referred to as the zinc/electrochemical depolarized concentrator, uses a standard EDC cell construction modified for use with the Zn anode. The Zn anode is consumed and subsequently regenerated, thereby eliminating the need to supply H2 to the EDC for the CO2 removal process. The evaluation was based primarily on an analytical evaluation of the two ZnDCs at projected end item performance and hardware design levels. Both ZnDC concepts for PLSS CO2 removal application were found to be noncompetitive in both total equivalent launch weight and individual extravehicular activity mission volume when compared to other candidate regenerable PLSS CO2 scrubbers

Electrochemical carbon dioxide concentrator: Math model

A steady state computer simulation model of an Electrochemical Depolarized Carbon Dioxide Concentrator (EDC) has been developed. The mathematical model combines EDC heat and mass balance equations with empirical correlations derived from experimental data to describe EDC performance as a function of the operating parameters involved. The model is capable of accurately predicting performance over EDC operating ranges. Model simulation results agree with the experimental data obtained over the prediction range

The use of ERTS-1 to more fully utilize and apply marine station data to the study and productivity along the eastern shelf waters of the United States

The author has identified the following significant results. Sea truth data were obtained during two ERTS overpasses in waters near the entrance of the Chesapeake Bay. Correlations were made between total phytoplankton and chlorophyll values in these waters to radiance detected by ERTS in an effort to map areas of similar productivity levels. Band 4 radiance had the highest correlation to all parameters with bands 5 and 6 showing decreasing correlations in each case. The radiance values were apparently influenced by one or more factors, most likely including the sediment content of the water. Data have shown that ERTS MSS is not suitable for monitoring chlorophyll in near-shore waters where sediment loads are high. It is suggested that in more seaward or pelagic locations, that ERTS MSS would be more efficient in monitoring surface chlorophyll values and establishing direct relationships to phytoplankton concentrations

Electrochemical carbon dioxide concentrator subsystem math model

A steady state computer simulation model has been developed to describe the performance of a total six man, self-contained electrochemical carbon dioxide concentrator subsystem built for the space station prototype. The math model combines expressions describing the performance of the electrochemical depolarized carbon dioxide concentrator cells and modules previously developed with expressions describing the performance of the other major CS-6 components. The model is capable of accurately predicting CS-6 performance over EDC operating ranges and the computer simulation results agree with experimental data obtained over the prediction range

Evaluation of a spacecraft nitrogen generator

A research and development program was successfully completed towards the development of a method of generating nitrogen for cabin leakage makeup aboard space vehicles. The nitrogen generation concept used liquid hydrazine as the stored form of nitrogen. This reduced tankage and expendables weight associated with high pressure gaseous and cryogenic liquid nitrogen storage. The hydrazine was catalytically dissociated to yield a mixture of nitrogen and hydrogen. The latter was separated to provide the makeup nitrogen. The hydrogen will be used in the reduction of metabolic carbon dioxide

Search for the Standard Model Higgs Boson in the Diphoton Decay Channel with 4.9 fb^(-1) of pp Collision Data at √s = 7 TeV with ATLAS

A search for the standard model Higgs boson is performed in the diphoton decay channel. The data used correspond to an integrated luminosity of 4.9  fb^(-1) collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of √s = 7  TeV. In the diphoton mass range 110–150 GeV, the largest excess with respect to the background-only hypothesis is observed at 126.5 GeV, with a local significance of 2.8 standard deviations. Taking the look-elsewhere effect into account in the range 110–150 GeV, this significance becomes 1.5 standard deviations. The standard model Higgs boson is excluded at 95% confidence level in the mass ranges of 113–115 GeV and 134.5–136 GeV

Measurement of the W →τν_τ cross section in pp collisions at √s = 7 TeV with the ATLAS experiment

The cross section for the production of W bosons with subsequent decay W→τν_τ is measured with the ATLAS detector at the LHC. The analysis is based on a data sample that was recorded in 2010 at a proton–proton center-of-mass energy of √s = 7TeV and corresponds to an integrated luminosity of 34 pb^(−1). The cross section is measured in a region of high detector acceptance and then extrapolated to the full phase space. The product of the total W production cross section and the W→τν_τ branching ratio is measured to be σ^(tot) _(W→τντ) = 11.1±0.3 (stat)±1.7 (syst)±0.4 (lumi) nb