34,654 research outputs found

    Abrasion by aeolian particles: Earth and Mars

    Get PDF
    Estimation of the rate of aeolian abrasion of rocks on Mars requires knowledge of: (1) particle flux, (2) susceptibilities to abrasion of various rocks, and (3) wind frequencies on Mars. Fluxes and susceptibilities for a wide range of conditions were obtained in the laboratory and combined with wind data from the Viking meteorology experiment. Assuming an abundant supply of sand-sized particles, estimated rates range up to 2.1 x 10 to the minus 2 power cm of abrasion per year in the vicinity of Viking Lander 1. This rate is orders of magnitude too great to be in agreement with the inferred age of the surface based on models of impact crater flux. The discrepancy in the estimated rate of abrasion and the presumed old age of the surface cannot be explained easily by changes in climate or exhumation of ancient surfaces. The primary reason is thought to be related to the agents of abrasion. At least some sand-sized (approx. 100 micrometers) grains appear to be present, as inferred from both lander and orbiter observations. High rates of abrasion occur for all experimental cases involving sands of quartz, basalt, or ash. However, previous studies have shown that sand is quickly comminuted to silt- and clay-sized grains in the martian aeolian regime. Experiments also show that these fine grains are electrostatically charged and bond together as sand-sized aggregates. Laboratory simulations of wind abrasion involving aggregates show that at impact velocities capable of destroying sand, aggregates from a protective veneer on the target surface and can give rise to extremely low abrasion rates

    Microgravity studies of aggregation in particulate clouds

    Get PDF
    Aggregation in clouds of submillimeter quartz and volcanic ash particles was studied in microgravity. Particle clouds generated by pulses of air immediately formed electrostatic filamentary aggregates upon cessation of air turbulence. Manual agitation of experiment chambers produced cm-size loose grain clusters which voraciously scavenged free-floating material in their vicinity. A dipole model accounts for these observations. Experimental results have ramifications for the behavior of natural cloud systems and primary accretion of solids in the early solar nebula

    Letter from R. B. Marshall to John Muir, 1913 Apr 28.

    Get PDF
    Washington D.C.April 28/1913My dear Mr MuirThank you with all my heart for your days of boyhood. Please give the world [those?] after you turned. The book is wonderfull. It is my friend Muir.There is nothing I can think of as an exchange for your so many kindnesses. So you hold me ever in bond.I am however with you all the time and I am sending you today a photo. and I beg of you the privilege of hiding some where in you workshop. let me be near the seats of the mighty when the angel come to call my good friend John Muir (God grant the time is far in the distant future) and peoples are looking for your unpublish jewels I want them to find a sign of one of the truest friends a man ever had-Your friend marshall. Just hide the photograph and I shall be most happySincerelyR. B. Marshall0543

    Design and calibration of the carousel wind tunnel

    Get PDF
    In the study of planetary aeolian processes the effect of gravity is not readily modeled. Gravity appears in the equations of particle motion along with interparticle forces but the two terms are not separable. A wind tunnel that would permit variable gravity would allow separation of the forces and aid greatly in understanding planetary aeolian processes. The design Carousel Wind Tunnel (CWT) allows for a long flow distance in a small sized tunnel since the test section is a continuo us circuit and allows for a variable pseudo gravity. A prototype design was built and calibrated to gain some understanding of the characteristics of the design and the results presented

    Optimal solutions for complex design problems: Using isoperformance software for human factors trade offs

    Get PDF
    A major application of isoperformance is as a trade-off methodology of the three major drivers of system design; equipment, training variables, and user characteristics. The flexibility of isoperformance allows each of these three components to be nearly any rational variation. For example, aptitude may be military Armed Forces Qualification Testing (AFQT) categories, cutoff scores within a selection procedure, or simply dichotomizing high and low scorers (pass/fail). Equipment may be new versus old, 'smart' versus dumb, high versus low resolution, etc. Training may be short versus long or varieties of media types (lecture versus CAI/CBI versus self-paced workbooks). In its final computerized form isoperformance lets the user set an operational level of performance (e.g., a jet pilot in a simulated emergency must take prescribed corrective action and clear the plane in several seconds, pilot astronauts will check out all shuttle flight systems within 30 minutes, or Mission Specialists must handle sucdessfully a required number of job elements). At this point the computer program guides the user through any requested trade-offs of the three components while maintaining the specified operational level of performance through isoperformance curves. A demonstration of the computer program is currently available

    Extraordinarily high leaf selenium to sulfur ratios define ‘se-accumulator’ plants

    Get PDF
    Background and Aims: Selenium (Se) and sulfur (S) exhibit similar chemical properties. In flowering plants (angiosperms) selenate and sulfate are acquired and assimilated by common transport and metabolic pathways. It is hypothesized that most angiosperm species show little or no discrimination in the accumulation of Se and S in leaves when their roots are supplied a mixture of selenate and sulfate, but some, termed Se-accumulator plants, selectively accumulate Se in preference to S under these conditions. Methods: This paper surveys Se and S accumulation in leaves of 39 angiosperm species, chosen to represent the range of plant Se accumulation phenotypes, grown hydroponically under identical conditions. Results: The data show that, when supplied a mixture of selenate and sulfate: (1) plant species differ in both their leaf Se ([Se]leaf) and leaf S ([S]leaf) concentrations; (2) most angiosperms show little discrimination for the accumulation of Se and S in their leaves and, in non-accumulator plants, [Se]leaf and [S]leaf are highly correlated; (3) [Se]leaf in Se-accumulator plants is significantly greater than in other angiosperms, but [S]leaf, although high, is within the range expected for angiosperms in general; and (4) the Se/S quotient in leaves of Se-accumulator plants is significantly higher than in leaves of other angiosperms. Conclusion: The traits of extraordinarily high [Se]leaf and leaf Se/S quotients define the distinct elemental composition of Se-accumulator plants

    Aeolian abrasion on Venus: Preliminary results from the Venus simulator

    Get PDF
    The role of atmospheric pressure on aeolian abrasion was examined in the Venus Simulator with a constant temperature of 737 K. Both the rock target and the impactor were fine-grained basalt. The impactor was a 3 mm diameter angular particle chosen to represent a size of material that is entrainable by the dense Venusian atmosphere and potentially abrasive by virtue of its mass. It was projected at the target 10 to the 5 power times at a velocity of 0.7 m/s. The impactor showed a weight loss of approximately 1.2 x 10 to the -9 power gm per impact with the attrition occurring only at the edges. Results from scanning electron microscope analysis, profilometry, and weight measurement are summarized. It is concluded that particles can incur abrasion at Venusian temperatures even with low impact velocities expected for Venus

    The Structure of High Strehl Ratio Point-Spread Functions

    Full text link
    We describe the symmetries present in the point-spread function (PSF) of an optical system either located in space or corrected by an adaptive o to Strehl ratios of about 70% and higher. We present a formalism for expanding the PSF to arbitrary order in terms of powers of the Fourier transform of the residual phase error, over an arbitrarily shaped and apodized entrance aperture. For traditional unapodized apertures at high Strehl ratios, bright speckles pinned to the bright Airy rings are part of an antisymmetric perturbation of the perfect PSF, arising from the term that is first order in the residual phase error. There are two symmetric second degree terms. One is negative at the center, and, like the first order term, is modulated by the perfect image's field strength -- it reduces to the Marechal approximation at the center of the PSF. The other is non-negative everywhere, zero at the image center, and can be responsible for an extended halo -- which limits the dynamic range of faint companion detection in the darkest portions of the image. In regimes where one or the other term dominates the speckles in an image, the symmetry of the dominant term can be exploited to reduce the effect of those speckles, potentially by an order of magnitude or more. We demonstrate the effects of both secondary obscuration and pupil apodization on the structure of residual speckles, and discuss how these symmetries can be exploited by appropriate telescope and instrument design, observing strategies, and filter bandwidths to improve the dynamic range of high dynamic range AO and space-based observations. Finally, we show that our analysis is relevant to high dynamic range coronagraphy.Comment: Accepted for publication in ApJ; 20 pages, 4 figure
    • …
    corecore