Optimizing photovoltaic arrays : A tested dataset of newly manufactured PV modules for data-driven analysis and algorithm development

This data article presents a comprehensive dataset comprising experimentally tested characteristics of newly manufactured photovoltaic (PV) modules, which have been collected by using a commercial PV testing system from a solar panel manufacturer company. The PV testing system includes an artificial sunlight simulator to generate input light for the PV and the outputs of the PV are tested by a professional IV tracer in a darkroom environment maintaining IEC60904–9 standard. The dataset encompasses modules with power ratings of 10 W, 85 W, and 247 W, each represented by 40 individual module records. The tested and collected characteristics of each module include open circuit voltage, short circuit current, maximum power point voltage, maximum power point current, maximum power point power, and fill factor. The motivation for this dataset lies in addressing the challenges posed by manufacturing defects and a ± 5 % manufacturing tolerance, which can lead to mismatch power losses in newly installed PV arrays. These losses result in lower current in series strings and lower voltage in parallel branches, ultimately decreasing the array's output power. The dataset serves as a valuable resource for academic research, particularly in the domain of PV array optimization. To facilitate optimization efforts, different algorithms have been explored in the literature. This dataset supports the exploration of these optimization algorithms to find solutions that enhance the position of each module within the array, consequently increasing the overall output power and efficiency of the PV system. The objective is to mitigate mismatch power losses, which, if unaddressed, can contribute to increased degradation rates and early aging of PV modules. This dataset lays the groundwork for addressing critical PV array performance and efficiency issues. In future research, this dataset can be reused to explore and implement optimization algorithms, to improve the overall output power and lifespan of newly installed PV arrays. The smart solution proposed in [1], utilizing a genetic algorithm-based module arrangement, demonstrates promising results for maximizing PV array output power using this dataset

Feasibility analysis of floating photovoltaic power plant in Bangladesh: A case study in Hatirjheel Lake, Dhaka

The installation of large-scale photovoltaic (LSPV) power plants is a solution to mitigate the national energy demand in Bangladesh. However, the land crisis is one of the key challenges for the rapid growth of ground-mounted LSPV plants in Bangladesh. The per unit cost of energy from ground-mounted PV systems is rising as a response to numerous difficulties, particularly for large-scale electricity generation. To overcome the issues with land-based PV, the floating photovoltaic (FPV) could be a viable solution. To the aspirations of the Sustainable and Renewable Energy Development Authority (SREDA), this article has investigated the feasibility of constructing a floating solar plant at Hatirjheel Lake in Dhaka, Bangladesh. The lake is an excellent spot to build an FPV plant due to its geographic location and climatic conditions inside the capital city. In this paper, the design of the plant and tariff are carried out using the PVsyst simulator. It is found that the optimum cost of energy for the plant is $ 0.0959/KWh, which is lesser than the currently operational ground-mounted PV plants in Bangladesh. Additionally, the projected 6.7 MW plant can meet 12.5 % of the local energy demand. Furthermore, the FPV plant is capable to cut off 6685 tons of CO2 annually. A reduction in power costs and environmental protection would assist the government of Bangladesh in achieving the sustainable development goals and electricity generation target of 6000 MW from solar photovoltaics by 2041 as well

Energy maximization of Old PV array under discoloration conditions using different interconnection schemes

Discoloration of solar panels is a phenomenon where the color of the panels changes over time due to numerous environmental variables such as temperature, irradiance, and humidity. Discoloration causes a significant impact on the PV performance reduction considering output power. The power degradation increases gradually due to the increment of discoloration of aged PV array modules. In this work, the effect of discoloration has been investigated practically by considering a five-year aged 200 W PV array. The array modules are connected in 4×5 array configurations and the power rating of each module is 10W. The PV modules are tested individually using a professional PV tester and visual imaged-based investigations have been made to identify the discoloration effects on each module output power. Based on these results the array modules are rearranged to increase the output power using a module rearranged technique. Moreover, five different interconnection schemes are applied to make a comparative investigation considering the PV array output power and percentage of recoverable energy. The experimental results show that the BL interconnection scheme can generate 4.93% more energy than the typical SP interconnection

The Effects of Non-Uniformly-Aged Photovoltaic Array on Mismatch Power Loss: A Practical Investigation towards Novel Hybrid Array Configurations

One of the most important causes of a reduction in power generation in PV panels is the non-uniform aging of photovoltaic (PV) modules. The increase in the current–voltage (I–V) mismatch among the array modules is the primary cause of this kind of degradation. There have been several array configurations investigated over the years to reduce mismatch power loss (MPL) caused by shadowing, but there have not been any experimental studies that have specifically examined the impact of various hybrid array topologies taking PV module aging into consideration. This research examines the influence of the non-uniform aging scenario on the performance of solar PV modules with various interconnection strategies. Experiments have been carried out on a 4 × 10, 400 W array with 12 possible configurations, including three proposed configurations (LD-TCT, SP-LD, and LD-SP), to detect the electrical characteristics of a PV system. Finally, the performances of different module configurations are analyzed where the newly proposed configurations (SP-LD and LD-SP) show 15.80% and 15.94% higher recoverable energy (RE), respectively, than the most-adopted configuration (SP). Moreover, among the twelve configurations, the SP configuration shows the highest percentage of MPL, which is about 17.96%, whereas LD-SP shows the lowest MPL at about 4.88%

The effects of non-uniformly-aged photovoltaic array on mismatch power loss : A practical investigation towards novel hybrid array configurations

One of the most important causes of a reduction in power generation in PV panels is the non-uniform aging of photovoltaic (PV) modules. The increase in the current–voltage (I–V) mismatch among the array modules is the primary cause of this kind of degradation. There have been several array configurations investigated over the years to reduce mismatch power loss (MPL) caused by shadowing, but there have not been any experimental studies that have specifically examined the impact of various hybrid array topologies taking PV module aging into consideration. This research examines the influence of the non-uniform aging scenario on the performance of solar PV modules with various interconnection strategies. Experiments have been carried out on a 4 × 10, 400 W array with 12 possible configurations, including three proposed configurations (LD-TCT, SP-LD, and LD-SP), to detect the electrical characteristics of a PV system. Finally, the performances of different module configurations are analyzed where the newly proposed configurations (SP-LD and LD-SP) show 15.80% and 15.94% higher recoverable energy (RE), respectively, than the most-adopted configuration (SP). Moreover, among the twelve configurations, the SP configuration shows the highest percentage of MPL, which is about 17.96%, whereas LD-SP shows the lowest MPL at about 4.88%

Techno-economic and carbon emission assessment of a large-scale floating solar pv system for sustainable energy generation in support of malaysia’s renewable energy roadmap

Energy generation from renewable sources is a global trend due to the carbon emissions generated by fossil fuels, which cause serious harm to the ecosystem. As per the long-term goals of the ASEAN countries, the Malaysian government established a target of 31% renewable energy generation by 2025 to facilitate ongoing carbon emission reductions. To reach the goal, a large-scale solar auction is one of the most impactful initiatives among the four potential strategies taken by the government. To assist the Malaysian government’s large-scale solar policy as detailed in the national renewable energy roadmap, this article investigated the techno-economic and feasibility aspects of a 10 MW floating solar PV system at UMP Lake. The PVsyst 7.3 software was used to develop and compute energy production and loss estimation. The plant is anticipated to produce 17,960 MWh of energy annually at a levelized cost of energy of USD 0.052/kWh. The facility requires USD 8.94 million in capital costs that would be recovered within a payback period of 9.5 years from the date of operation. The plant is expected to reduce carbon emissions by 11,135.2 tons annually. The proposed facility would ensure optimal usage of UMP Lake and contribute to the Malaysian government’s efforts toward sustainable growth

Identification and characterization of antibacterial compound(s) of cockroaches (Periplaneta americana)

Infectious diseases remain a significant threat to human health, contributing to more than 17 million deaths, annually. With the worsening trends of drug resistance, there is a need for newer and more powerful antimicrobial agents. We hypothesized that animals living in polluted environments are potential source of antimicrobials. Under polluted milieus, organisms such as cockroaches encounter different types of microbes, including superbugs. Such creatures survive the onslaught of superbugs and are able to ward off disease by producing antimicrobial substances. Here, we characterized antibacterial properties in extracts of various body organs of cockroaches (Periplaneta americana) and showed potent antibacterial activity in crude brain extract against methicillin-resistant Staphylococcus aureus and neuropathogenic E. coli K1. The size-exclusion spin columns revealed that the active compound(s) are less than 10 kDa in molecular mass. Using cytotoxicity assays, it was observed that pre-treatment of bacteria with lysates inhibited bacteria-mediated host cell cytotoxicity. Using spectra obtained with LC-MS on Agilent 1290 infinity liquid chromatograph, coupled with an Agilent 6460 triple quadruple mass spectrometer, tissues lysates were analyzed. Among hundreds of compounds, only a few homologous compounds were identified that contained isoquinoline group, chromene derivatives, thiazine groups, imidazoles, pyrrole containing analogs, sulfonamides, furanones, flavanones, and known to possess broad-spectrum antimicrobial properties, and possess anti-inflammatory, anti-tumour, and analgesic properties. Further identification, characterization and functional studies using individual compounds can act as a breakthrough in developing novel therapeutics against various pathogens including superbugs