Multidimensional image selection and classification system based on visual feature extraction and scaling

Sorting and searching operations used for the selection of test images strongly affect the results of image quality investigations and require a high level of versatility. This paper describes the way that inherent image properties, which are known to have a visual impact on the observer, can be used to provide support and an innovative answer to image selection and classification. The selected image properties are intended to be comprehensive and to correlate with our perception. Results from this work aim to lead to the definition of a set of universal scales of perceived image properties that are relevant to image quality assessments. The initial prototype built towards these objectives relies on global analysis of low-level image features. A multidimensional system is built, based upon the global image features of: lightness, contrast, colorfulness, color contrast, dominant hue(s) and busyness. The resulting feature metric values are compared against outcomes from relevant psychophysical investigations to evaluate the success of the employed algorithms in deriving image features that affect the perceived impression of the images

A comparison of 0.375% ropivacaine psoas compartment block and 2% prilocaine spinal anaesthesia in dogs undergoing tibial plateau levelling osteotomy

BACKGROUND: In dogs undergoing routine elective orthopaedic surgeries carried out as same-day surgeries regional anaesthetic techniques (RATs) should aim to produce analgesia but minimising the postoperative motor dysfunction. Our objective was to compare the perioperative analgesic effects and the time to motor recovery between spinal anaesthesia (SA) with hyperbaric solution of prilocaine 2% (mg = 4 x [0.3 × BW (kg) + 0.05 × SCL (cm)]) and morphine (0.03 mg/kg) and combined ultrasound (US) and electro stimulator-guided psoas compartment and ischiatic nerve block (PB) with ropivacaine 0.375% (0.45 mL/kg). Dogs undergoing tibial plateau levelling osteotomy (TPLO) were randomly assigned to receive either SA or PB. Procedural failure, perioperative rescue analgesia, motor block recovery and complications were recorded. RESULTS: Procedural failure rate (PFR) was 19% (7 out of 36) for SA and 9% (3 out of 32) for PB (p = 0.31). Intraoperative rescue analgesia was administered to 6/29 (21%) SA group dogs and in 15/29 (52%) PB group dogs, respectively (p = 0.03). At 3 h after RAT, percentage of dogs with complete block recovery was 25/29 (86%) and 25/29 (86%) in group SA and PB, respectively (p = 1). Two cases of pruritus and one case of urinary retention were recorded in the SA group. Residual ischiatic nerve block was noted at 12 h after RAT in 2/15 (13%) of dogs in group PB; it completely resolved 24 h after RAT. CONCLUSIONS: SA with prilocaine 2% and PB with ropivacaine 0.37% were found suitable for dogs undergoing same-day TPLO surgery. Pruritus and urinary retention in SA and residual block in both groups might occasionally delay the time of discharge. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s12917-022-03277-6

Heart Angiotensin-Converting Enzyme and Angiotensin-Converting Enzyme 2 Gene Expression Associated With Male Sex and Salt-Sensitive Hypertension in the Dahl Rat

Angiotensin-converting enzyme 2 (ACE 2) in the heart including its sex dependency in the hypertensive heart, has not been much studied compared to ACE. In the present study, we used the Dahl salt-sensitive rat exposed to fructose and salt to model a hypertensive phenotype in males, females, and ovariectomized females. Blood pressure was measured by the tale-cuff technique in the conscious state. Expression of RAS-related genes ACE, ACE2, angiotensin II receptor type 1, Mas1, and CMA1 in the heart were quantified. The results revealed small but significant differences between male and female groups. The main results indicate the presence of a male preponderance for an increase in ACE and ACE2 gene expression. The results are in accordance with the role of androgens or male chromosomal complement in controlling the expression of the two ACE genes

Life cycle assessment and feasibility analysis of a combined chemical looping combustion and power-to-methane system for CO2 capture and utilization

The ability to store effectively excess of electrical energy from peaks of production is key to the development of renewable energies. Power-To-Gas, and specifically Power-To-Methane represents one of the most promising option. This works presents an innovative process layout that integrates Chemical Looping Combustion of solid fuels and a Power-to-Methane system. The core of the proposed layout is a multiple interconnected fluidized bed system (MFB) equipped with a two-stage fuel reactor (t-FR). Performances of the system were evaluated by considering a coal as fuel and CuO supported on zirconia as oxygen carrier. A kinetic scheme comprising both heterogeneous and homogeneous reactions occurring in the MFB was considered. The methanation unit was modelled developing a thermodynamic calculation method based on minimization of the free Gibbs energy. The performance of the system was evaluated by considering that the CO/CO2 stream coming from the t-FR reacts over Ni supported on alumina catalyst with a pure H2 stream generated by an array of electrolysis cells. The number of cells to be stacked in the array was evaluated by considering that a constant H2 production able to convert the whole CO/CO2 stream produced by the CLC process should be attained. The environmental performance of the proposed process was quantified using the Life Cycle Assessment (LCA) methodology. The analysis shows i) that the majority originate from the production and disposal of the oxygen carrier used in the t-FR, and ii) that reusing part of the oxygen produced by the electrolysis cells improves significantly the environmental performance of the proposed process

Life cycle assessment and feasibility analysis of a combined chemical looping combustion and power-to-methane system for CO2 capture and utilization

The ability to store effectively excess of electrical energy from peaks of production is key to the development of renewable energies. Power-To-Gas, and specifically Power-To-Methane represents one of the most promising option. This works presents an innovative process layout that integrates Chemical Looping Combustion of solid fuels and a Power-to-Methane system. The core of the proposed layout is a multiple interconnected fluidized bed system (MFB) equipped with a two-stage fuel reactor (t-FR). Performances of the system were evaluated by considering a coal as fuel and CuO supported on zirconia as oxygen carrier. A kinetic scheme comprising both heterogeneous and homogeneous reactions occurring in the MFB was considered. The methanation unit was modelled developing a thermodynamic calculation method based on minimization of the free Gibbs energy. The performance of the system was evaluated by considering that the CO/CO2 stream coming from the t-FR reacts over Ni supported on alumina catalyst with a pure H2 stream generated by an array of electrolysis cells. The number of cells to be stacked in the array was evaluated by considering that a constant H2 production able to convert the whole CO/CO2 stream produced by the CLC process should be attained. The environmental performance of the proposed process was quantified using the Life Cycle Assessment (LCA) methodology. The analysis shows i) that the majority originate from the production and disposal of the oxygen carrier used in the t-FR, and ii) that reusing part of the oxygen produced by the electrolysis cells improves significantly the environmental performance of the proposed process

Introduction of robotic surgery for endometrial cancer into a Brazilian cancer service: a randomized trial evaluating perioperative clinical outcomes and costs

OBJECTIVE: The purpose of this study was to evaluate the clinical outcome and costs after the implementation of robotic surgery in the treatment of endometrial cancer, compared to the traditional laparoscopic approach. METHODS: In this prospective randomized study from 2015 to 2017, eighty-nine patients with endometrial carcinoma that was clinically restricted to the uterus were randomized in robotic surgery (44 cases) and traditional laparoscopic surgery (45 cases). We compared the number of retrieved lymph nodes, total time of surgery, time of each surgical step, blood loss, length of hospital stay, major and minor complications, conversion rates and costs. RESULTS: The ages of the patients ranged from 47 to 69 years. The median body mass index was 31.1 (21.4-54.2) in the robotic surgery arm and 31.6 (22.9-58.6) in the traditional laparoscopic arm. The median tumor sizes were 4.0 (1.5-10.0) cm and 4.0 (0.0-9.0) cm in the robotic and traditional laparoscopic surgery groups, respectively. The median total numbers of lymph nodes retrieved were 19 (3-61) and 20 (4-34) in the robotic and traditional laparoscopic surgery arms, respectively. The median total duration of the whole procedure was 319.5 (170-520) minutes in the robotic surgery arm and 248 (85-465) minutes in the traditional laparoscopic arm. Eight major complications were registered in each group. The total cost was 41% higher for robotic surgery than for traditional laparoscopic surgery. CONCLUSIONS: Robotic surgery for endometrial cancer presented equivalent perioperative morbidity to that of traditional laparoscopic surgery. The duration and total cost of robotic surgery were higher than those of traditional laparoscopic surgery

Diet and Plastic Ingestion in the Blackmouth Catshark Galeus melastomus, Rafinesque 1810, in Italian Waters

Simple Summary The blackmouth catshark has a habitat range that spans from the Norwegian seas to Senegal and throughout the Mediterranean Sea, and it is one of the most common sharks in Italian waters. The aim of this work is to investigate, through the analyses of the stomach contents of five populations from the Tyrrhenian and Ionian Seas, the diet of blackmouth catsharks. The analyses showed that the most frequent items were Osteichthyes of the family Myctophidae, except for one population, in which the most common items were Cephalopods and Crustacean of the Decapods order. Plastic debris was also found in all populations analysed and classified by colour and shape. This study ought to increase the knowledge of the feeding ecology of the blackmouth catshark, thus improving the meagre literature about Tyrrhenian and Ionian waters. Galeus melastomus is the most common Pentanchidae in the Mediterranean Sea. A scavenger and opportunistic feeder, and despite the wide distribution, little is known about its feeding habits in Italian waters. The main purpose of this study was to investigate the diet of the blackmouth catshark by analysing the stomach contents. The specimens analysed were obtained from five populations of the Tyrrhenian and of the Ionian Seas, collected from a depth between 40 and 700 m. A total of 259 stomachs were analysed. The stomach contents were grouped into macro-categories and identified to the lowest taxonomic level possible. Crustaceans such as Parapenaeus longirostris, the Cephalopods Heteroteuthis dispar and Onychoteuthis banksii, and Osteichthyes, mostly Myctophidae, were identified. Plastic debris was also found among the stomach contents and classified according to its colour and shape. Osteichthyes represent the most abundant item (44%), above all the Myctophidae family, except for the catshark population from Tuscany, in which the most frequent species were Cephalopods, such as Abralia veranyi and Heteroteuthis dispar. Differences in the plastic debris contents were also observed between the Tuscany population and other populations. These could be explained as a probable consequence of the different depths at which the blackmouth catshark populations were sampled