Development of the setup for study of the gas ionization in the pulsating mode of combustion

© 2018 Institute of Physics Publishing. All rights reserved. At present, known methods of direct conversion of the chemical energy of gaseous fuels to electrical energy are not so effective. This work is directed to developing the setup for experimental study of the gas ionization processes in the pulsating mode of combustion. This problem being solve for the first time. As result, schematic diagram and methodological recommendations will be developed which will be subsequently used for experimental studies

The influence of nickel layer thickness on microhardness and hydrogen sorption rate of commercially pure titanium alloy

The influence of nickel coating thickness on microhardness and hydrogen sorption rate by commercially pure titanium alloy was established in this work. Coating deposition was carried out by magnetron sputtering method with prior ion cleaning of surface. It was shown that increase of sputtering time from 10 to 50 minutes leads to increase coating thickness from 0.56 to 3.78 ?m. It was established that increase of nickel coating thickness leads to increase of microhardness at loads less than 0.5 kg. Microhardness values for all samples are not significantly different at loads 1 kg. Hydrogen content in titanium alloy with nickel layer deposited at 10 and 20 minutes exceeds concentration in initial samples on one order of magnitude. Further increasing of deposition time of nickel coating leads to decreasing of hydrogen concentration in samples due to coating delamination in process of hydrogenation

The influence of nickel layer thickness on microhardness and hydrogen sorption rate of commercially pure titanium alloy

The influence of nickel coating thickness on microhardness and hydrogen sorption rate by commercially pure titanium alloy was established in this work. Coating deposition was carried out by magnetron sputtering method with prior ion cleaning of surface. It was shown that increase of sputtering time from 10 to 50 minutes leads to increase coating thickness from 0.56 to 3.78 ?m. It was established that increase of nickel coating thickness leads to increase of microhardness at loads less than 0.5 kg. Microhardness values for all samples are not significantly different at loads 1 kg. Hydrogen content in titanium alloy with nickel layer deposited at 10 and 20 minutes exceeds concentration in initial samples on one order of magnitude. Further increasing of deposition time of nickel coating leads to decreasing of hydrogen concentration in samples due to coating delamination in process of hydrogenation

The algorithm diagram of combustion optimizing of a hydrocarbon fuels variable composition in thermal power plants

© 2018 Institute of Physics Publishing. All rights reserved. In modern power engineering, there is a problem of rational and efficient use of hydrocarbon fuels variable composition. The composition of the fuel can vary in time and from different sources. These changes lead to combustion optimum regime shift in thermal power plants. Previously, an algorithm of combustion optimizing of a hydrocarbon fuel variable composition in thermal power plants was developed. According to the algorithm, the fuel and air flows are regulated depending on the outlet temperature of the heat carrier. In this paper, a diagram of the implementation of this algorithm is presented

Development of the setup for study of the gas ionization in the pulsating mode of combustion

© 2018 Institute of Physics Publishing. All rights reserved. At present, known methods of direct conversion of the chemical energy of gaseous fuels to electrical energy are not so effective. This work is directed to developing the setup for experimental study of the gas ionization processes in the pulsating mode of combustion. This problem being solve for the first time. As result, schematic diagram and methodological recommendations will be developed which will be subsequently used for experimental studies

Bioactive Feed Additive for the Prevention of Clostridial Disease in High-Yielding Dairy Cattle

The purpose of this research is to develop and test a new approach to prevent clostridial disease in cattle, based on the use of a new compound biologically active feed additive (BFA). Some properties of the separate components of BFA are characterized. The research showed that a strain of the bacterium Bacillus amyloliquefaciens159 has an expressed antagonism to toxin-producing strains of C. perfringens. When using the test strains of C. perfringens from the ATCC collection (13,124 as type A, 10,543 as type C, 12,916 as type F), the anticlostridial activity of the tested strains varied, with size range of 14.0 ± 0.95–15.0 ± 1.28 mm of delayed growth zones. The bactericidal properties of lauric acid and the sorption properties of diatomaceous earth, included in BFA, were confirmed. The experiment was conducted on Holstein cows at the beginning of lactation (control, C (n = 15) vs. experimental E48 (n = 15), E80 (n = 15) and E112 (n = 15), 48, 80 and 112 g/head/day BFA, respectively. All cows were vaccinated with “Coglavax” (vaccine against bovine and sheep clostridial disease, Ceva-Phylaxia VeterinaryBiologicals, Hungary), reinjected two weeks before the experiment. At the end of the experiment (3.5 months after the vaccination and 3 months after the start of BFA feeding according to the scheme of the experiment), the immune response in the control and Group E48 to C. perfringens β-toxin remained at the initial level, while the response in Group E80 and Group E112 became higher under the influence of BFA feeding. Cows fed BFA saw a guaranteed improvement in non-specific resistance. The increase in serum lysozyme concentration in cows of Groups E was 1.01–2.91 mkg/mL vs. control (p p p p p p p = 0.002). Serum TBA–AP/ CP ratio was directly related to TBA–AP (r = 0.87, p p = 0.03 vs. Control). Thus, feeding BFA to dairy cows was found to improve resistance, prevent toxicoses and increase milk production of cattle, which can serve as an additional strategy for bioprotection of cattle against infection

Evaluation of a quality improvement intervention to reduce anastomotic leak following right colectomy (EAGLE): pragmatic, batched stepped-wedge, cluster-randomized trial in 64 countries

Background Anastomotic leak affects 8 per cent of patients after right colectomy with a 10-fold increased risk of postoperative death. The EAGLE study aimed to develop and test whether an international, standardized quality improvement intervention could reduce anastomotic leaks. Methods The internationally intended protocol, iteratively co-developed by a multistage Delphi process, comprised an online educational module introducing risk stratification, an intraoperative checklist, and harmonized surgical techniques. Clusters (hospital teams) were randomized to one of three arms with varied sequences of intervention/data collection by a derived stepped-wedge batch design (at least 18 hospital teams per batch). Patients were blinded to the study allocation. Low- and middle-income country enrolment was encouraged. The primary outcome (assessed by intention to treat) was anastomotic leak rate, and subgroup analyses by module completion (at least 80 per cent of surgeons, high engagement; less than 50 per cent, low engagement) were preplanned. Results A total 355 hospital teams registered, with 332 from 64 countries (39.2 per cent low and middle income) included in the final analysis. The online modules were completed by half of the surgeons (2143 of 4411). The primary analysis included 3039 of the 3268 patients recruited (206 patients had no anastomosis and 23 were lost to follow-up), with anastomotic leaks arising before and after the intervention in 10.1 and 9.6 per cent respectively (adjusted OR 0.87, 95 per cent c.i. 0.59 to 1.30; P = 0.498). The proportion of surgeons completing the educational modules was an influence: the leak rate decreased from 12.2 per cent (61 of 500) before intervention to 5.1 per cent (24 of 473) after intervention in high-engagement centres (adjusted OR 0.36, 0.20 to 0.64; P < 0.001), but this was not observed in low-engagement hospitals (8.3 per cent (59 of 714) and 13.8 per cent (61 of 443) respectively; adjusted OR 2.09, 1.31 to 3.31). Conclusion Completion of globally available digital training by engaged teams can alter anastomotic leak rates. Registration number: NCT04270721 (http://www.clinicaltrials.gov)