Catalytic abatement of volatile organic compounds assisted by non-thermal plasma - Part 1. A novel dielectric barrier discharge reactor containing catalytic electrode

A novel catalytic reactor with dielectric barrier discharge (DBD) at atmospheric pressure was developed for the abatement of volatile organic compounds (VOCs). The novelty of DBD reactor is the metallic catalyst serving also as the inner electrode. The catalytic electrode was prepared from sintered metal fibers (SMF) in the form of a cylindrical tube. Oxides of Mn and Co were deposited on SMF by impregnation. Decomposition of toluene taken as the model VOC compound (< 1000 ppm in air) was investigated. The catalyst composition, toluene concentration, applied voltage and frequency were systematically varied to evaluate the performance of the DBD reactor. At 100 ppm of toluene, the conversion similar to 100% was achieved in the DBD reactor using a specific input energy (SIE) similar to 235 J/l independently of the chemical composition of the SMF catalytic electrode, but the selectivity to CO2 was observed to be a function of the catalyst composition. The MnOx/SMF catalytic electrode showed the best performance towards total oxidation. At a SIE of 295 J/l, the selectivity to CO2, was 80% with 100% conversion of toluene. No carbon solid residues were deposited on the electrode. (c) 2006 Elsevier B.V. All rights reserved

Nonthermal plasma Abatement of trichloroethylene Enhanced by Photocatalysis

Abatement of trichloroethylene (TCE, 250 ppm in air) was studied in a novel nonthermal plasma (NTP) dielectric barrier discharge reactor with an inner electrode made of sintered metal fibers (SMF). The SMF electrodes modified with TiO2 and MnO2 were observed to be catalytically active. Their efficiency in TCE decomposition was compared with a Cu inner electrode. The SMF electrode modified with MnO2 and TiO2 catalyst effectively destroys TCE due to the synergy between plasma excitation of the TCE molecules and their catalytic oxidation. The latter process was observed to be further enhanced by photocatalysis since TiO2 absorbs the UV light produced by the NTP. These innovative TiO2-modified SMF electrodes were characterized by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM), confirming formation of titania anatase, whereas the emission spectrum of the plasma showed the presence of ultraviolet light

Improved performance of non-thermal plasma reactor during decomposition of trichloroethylene: Optimization of the reactor geometry and introduction of catalytic electrode

The decomposition of trichloroethylene ITCE) by non-thermal plasma was investigated in a dielectric barrier discharge (DBD) reactor with a copper rod inner electrode and compared with a plasma-catalytic reactor. The particularity of the plasma-catalytic reactor is the inner electrode made of sintered metal fibers (SMF) coated by transition metal oxides. In order to optimize the geometry of the plasma reactor, the efficiency of TCE removal was compared for different discharge gap lengths in the range of 1-5 mm. Shorter gap lengths (1-3 mm) appear to be more advantageous with respect to TCE conversion. In this case TCE conversion varies between 67% and 100% for input energy densities in the range of 80-480 J/l, while for the 5 turn discharge gap the conversion was lower (53-97%) for similar values of the input energy. As a result of TICE oxidation carbon monoxide and carbon dioxide were detected in the effluent gas. Their selectivity was rather low, in the range 14-24% for CO2 and 11-23% for CO, and was not influenced by the gap length. Several other chlorinated organic compounds were detected as reaction products. When using MnOx/SMF catalysts as the inner electrode of the DBD reactor, the TCE conversion was significantly enhanced, reaching similar to 95% at 150 J/l input energy. The selectivity to CO2 showed a major increase as compared to the case without catalysts, reaching 58% for input energies above 550 J/l. (C) 2007 Elsevier B.V. All rights reserved

DEAR project: Lunar dust surface interactions, risk and removal investigations

The DEAR project (Dusty Environment Application Research) investigates the interaction between lunar regolith and surfaces and components relevant for lunar exploration. Based on the TUBS regolith simulant which is representative in chemistry, size and shape properties to Moon soils to study the regolith transport, adhesion and strategies for cleaning. The regolith simulant will be applied to thermal, structural, optical sensor, sealing and other astronautic systems, providing input for requirements, justification and verification. The key applications are split in human space flight regolith investigations, wrinkled surface with random movement and hardware surfaces, flat material defined movement. The paper provides an overview of the DEAR project including a discussion of the first results, in particular vibration, shock and micro-vibration on regolith bearing surfaces. The investigation shall enable better understand the regolith layers interaction and the release mechanism, as well as potential cross contamination and cleaning strategies. The research is complemented by simulation of the regolith motion as parameter surface plasma interactions. The project is funded and supported by the European Space Agency (ESA). DEAR specifically addresses the development and testing of lunar dust removal strategies on optics, mechanisms and human space flight hardware (e.g., space suits). As the Moons regolith is known to be highly abrasive, electrically chargeable, and potentially chemically reactive, lunar dust might reduce the performance of hardware, such as cameras, thermal control surfaces and solar cells. The dust can cause malfunction on seals for on/off mechanisms or space suits. Of particular interest are risk assessment, avoidance, and cleaning techniques such as the use of electric fields to remove lunar dust from surfaces. Representative dust (e.g., regolith analogues of interesting landing sites) will be used in a dedicated test setup to evaluate risks and effects of lunar dust. We describe designs and methods developed by the DEAR consortium to deal with the regolith-related issues, in particular an electrode design to deflect regolith particles, cleaning of astronautical systems with CO2, design of a robotic arm for the testing within the DEAR chamber, regolith removal via shock, and regolith interaction with cleanroom textile

Destruction of chemical warfare surrogates using a portable atmospheric pressure plasma jet

Today’s reality is connected with mitigation of threats from the new chemical and biological warfare agents. A novel investigation of cold plasmas in contact with liquids presented in this paper demonstrated that the chemically reactive environment produced by atmospheric pressure plasma jet (APPJ) is potentially capable of rapid destruction of chemical warfare agents in a broad spectrum. The decontamination of three different chemical warfare agent surrogates dissolved in liquid is investigated by using an easily transportable APPJ. The jet is powered by a kHz signal source connected to a low-voltage DC source and with He as working gas. The detailed investigation of electrical properties is performed for various plasmas at different distances from the sample. The measurements of plasma properties in situ are supported by the optical spectrometry measurements, whereas the high performance liquid chromatography measurements before and after the treatment of aqueous solutions of Malathion, Fenitrothion and Dimethyl Methylphosphonate. These solutions are used to evaluate destruction and its efficiency for specific neural agent simulants. The particular removal rates are found to be from 56% up to 96% during 10 min treatment. The data obtained provide basis to evaluate APPJ’s efficiency at different operating conditions. The presented results are promising and could be improved with different operating conditions and optimization of the decontamination process

A review of combined advanced oxidation technologies for the removal of organic pollutants from water

Water pollution through natural and anthropogenic activities has become a global problem causing short-and long-term impact on human and ecosystems. Substantial quantity of individual or mixtures of organic pollutants enter the surface water via point and nonpoint sources and thus affect the quality of freshwater. These pollutants are known to be toxic and difficult to remove by mere biological treatment. To date, most researches on the removal of organic pollutants from wastewater were based on the exploitation of individual treatment process. This single-treatment technology has inherent challenges and shortcomings with respect to efficiency and economics. Thus, application of two advanced treatment technologies characterized with high efficiency with respect to removal of primary and disinfection by-products in wastewater is desirable. This review article focuses on the application of integrated technologies such as electrohydraulic discharge with heterogeneous photocatalysts or sonophotocatalysis to remove target pollutants. The information gathered from more than 100 published articles, mostly laboratories studies, shows that process integration effectively remove and degrade recalcitrant toxic contaminants in wastewater better than single-technology processing. This review recommends an improvement on this technology (integrated electrohydraulic discharge with heterogeneous photocatalysts) viz-a-vis cost reduction in order to make it accessible and available in the rural and semi-urban settlement. Further recommendation includes development of an economic model to establish the cost implications of the combined technology. Proper monitoring, enforcement of the existing environmental regulations, and upgrading of current wastewater treatment plants with additional treatment steps such as photocatalysis and ozonation will greatly assist in the removal of environmental toxicants