In vitro acellular dissolution of mineral fibres: A comparative study

The study of the mechanisms by which mineral fibres promote adverse effects in both animals and humans is a hot topic of multidisciplinary research with many aspects that still need to be elucidated. Besides length and diameter, a key parameter that determines the toxicity/pathogenicity of a fibre is biopersistence, one component of which is biodurability. In this paper, biodurability of mineral fibres of social and economic importance (chrysotile, amphibole asbestos and fibrous erionite) has been determined for the first time in a systematic comparative way from in vitro acellular dissolution experiments. Dissolution was possible using the Gamble solution as simulated lung fluid (pH = 4 and at body temperature) so to reproduce the macrophage phagolysosome environment. The investigated mineral fibres display very different dissolution rates. For a 0.25 μm thick fibre, the calculated dissolution time of chrysotile is in the range 94-177 days, very short if compared to that of amphibole fibres (49-245 years), and fibrous erionite (181 years). Diffraction and SEM data on the dissolution products evidence that chrysotile rapidly undergoes amorphization with the formation of a nanophasic silica-rich fibrous metastable pseudomorph as first dissolution step whereas amphibole asbestos and fibrous erionite show minor signs of dissolution even after 9-12 months

In Vivo Biodistribution of Respirable Solid Lipid Nanoparticles Surface-Decorated with a Mannose-Based Surfactant: A Promising Tool for Pulmonary Tuberculosis Treatment?

The active targeting to alveolar macrophages (AM) is an attractive strategy to improve the therapeutic efficacy of ‘old’ drugs currently used in clinical practice for the treatment of pulmonary tuberculosis. Previous studies highlighted the ability of respirable solid lipid nanoparticle assemblies (SLNas), loaded with rifampicin (RIF) and functionalized with a novel synthesized mannose-based surfactant (MS), both alone and in a blend with sodium taurocholate, to efficiently target the AM via mannose receptor-mediated mechanism. Here, we present the in vivo biodistribution of these mannosylated SLNas, in comparison with the behavior of both non-functionalized SLNas and bare RIF. SLNas biodistribution was assessed, after intratracheal instillation in mice, by whole-body real-time fluorescence imaging in living animals and RIF quantification in excised organs and plasma. Additionally, SLNas cell uptake was determined by using fluorescence microscopy on AM from bronchoalveolar lavage fluid and alveolar epithelium from lung dissections. Finally, histopathological evaluation was performed on lungs 24 h after administration. SLNas functionalized with MS alone generated the highest retention in lungs associated with a poor spreading in extra-pulmonary regions. This effect could be probably due to a greater AM phagocytosis with respect to SLNas devoid of mannose on their surface. The results obtained pointed out the unique ability of the nanoparticle surface decoration to provide a potential more efficient treatment restricted to the lungs where the primary tuberculosis infection is located

The Impact of Lipid Corona on Rifampicin Intramacrophagic Transport Using Inhaled Solid Lipid Nanoparticles Surface-Decorated with a Mannosylated Surfactant

The mimicking of physiological conditions is crucial for the success of accurate in vitro studies. For inhaled nanoparticles, which are designed for being deposited on alveolar epithelium and taken up by macrophages, it is relevant to investigate the interactions with pulmonary surfactant lining alveoli. As a matter of fact, the formation of a lipid corona layer around the nanoparticles could modulate the cell internalization and the fate of the transported drugs. Based on this concept, the present research focused on the interactions between pulmonary surfactant and Solid Lipid Nanoparticle assemblies (SLNas), loaded with rifampicin, an anti-tuberculosis drug. SLNas were functionalized with a synthesized mannosylated surfactant, both alone and in a blend with sodium taurocholate, to achieve an active targeting to mannose receptors present on alveolar macrophages (AM). Physico-chemical properties of the mannosylated SLNas satisfied the requirements relative to suitable respirability, drug payload, and AM active targeting. Our studies have shown that a lipid corona is formed around SLNas in the presence of Curosurf, a commercial substitute of the natural pulmonary surfactant. The lipid corona promoted an additional resistance to the drug diffusion for SLNas functionalized with the mannosylated surfactant and this improved drug retention within SLNas before AM phagocytosis takes place. Moreover, lipid corona formation did not modify the role of nanoparticle mannosylation towards the specific receptors on MH-S cell membrane

Rheology of geopolymer by DOE approach

The effects of solid/liquid content, temperature, curing time and deflocculant concentration on some fundamental rheological parameters of metakaolin-based geopolymer suspensions activated by NaOH were studied by statistical DOE approach. Solid content appears to be the most important parameter among the studied ones. As well known, it has an influence both on viscosity, shear behaviour and yield stress. Instead the additive, an industrial grade sodium polyacrilate, has demonstrated to have a poor effect on the viscosity and yield stress. In synergy with curing time, temperature showed a different effect with respect to its classic rheological influence. In countertrend, increasing the temperature resulted in an increased viscosity due to acceleration of the geopolymerisation reactions.Rheological parameters have proven to be very sensitive to chemical changes in the studied system. In combination with DOE methodology, it is a potent tool for monitoring the microstructural evolution of geopolymers during curing

A Systematic Study of the Cryogenic Milling of Chrysotile Asbestos

For more than 40 years, intensive research has been devoted to shedding light on the mechanisms of asbestos toxicity. Given the key role of fibre length in the mechanisms of asbestos toxicity, much work has been devoted to finding suitable comminution routes to produce fibres in desired size intervals. A promising method is cryogenic milling that, unlike other mechanical size reduction techniques, preserves the crystal–chemical properties of materials. In this study, the effect of cryogenic milling on the physical–chemical properties of commercial Russian chrysotile was studied in order to produce precise size fractions with invariant properties compared to the pristine fibres. In particular, two batches with fibres > 5 µm and < 5 µm were prepared, as this limit sets their potential toxicity. The results are fundamental for future in vitro toxicity testing of this commercial product, widely used in chrysotile-friendly countries but not yet adequately studied. Results show that fibre length can be controlled by milling time under cryogenic conditions without inducing structural defects or amorphization; short fibres (95% L < 5 µm) can be obtained by cryogenic milling for 40 min, while 10 min is enough to yield long chrysotile fibres (90% L > 5 µm

Biodurability and release of metals during the dissolution of chrysotile, crocidolite and fibrous erionite

Background: The mechanisms by which mineral fibers induce adverse effects in vivo are still not well understood. The mechanisms of fiber dissolution in the lungs and subsequent release of metals in the extracellular/intracellular environment must be taken into account. Aim: For the first time, the kinetics of release of metals during the acellular in vitro dissolution of chrysotile, crocidolite and fibrous erionite were determined. Methods: In vitro acellular dissolution of chrysotile, crocidolite, and fibrous erionite-Na was conducted using a solution mimicking the phagolysosome environment active during the phagocytosis process (pH=4.5, at 37 °C). The kinetics of release of a representative selection of metals were determined over a period of three months. Results: Despite the fact that the difference in Fe content between chrysotile and crocidolite is one order of magnitude, the much faster dissolution rate of chrysotile compared to crocidolite prompts greater release of available active surface Fe in the first weeks of the dissolution experiment and comparable amounts after 90 d. Such active iron may promote the formation of toxic hydroxyl radicals. The fast release of metals like Cr, Ni and Mn from chrysotile is also a source of concern whereas the release of V in solution is negligible. Conclusion: Because chrysotile undergoes fast dissolution with respect to crocidolite and fibrous erionite, it behaves like a carrier that releases its metals’ cargo in the lung environment, mimicking the phenomenon that explains the toxicity of nanoparticles. Hence, the toxicity paradigm of a non biodurable fiber like chrysotile should also take into account the release of toxic metals in the intracellular/extracellular medium during the rapid dissolution process

Recycling of the product of thermal inertization of cement\u2013asbestosfor various industrial applications

Recycling of secondary raw materials is a priority of waste handling in the countries of the Europeancommunity. A potentially important secondary raw material is the product of the thermal transformationof cement\u2013asbestos, produced by prolonged annealing at 1200\u20131300C. The product is chemically comparableto a Mg-rich clinker. Previous work has assured the reliability of the transformation process. Thecurrent challenge is to find potential applications as secondary raw material. Recycling of thermally treatedasbestos-containing material (named KRY-AS) in traditional ceramics has already been studied withsuccessful results.The results presented here are the outcome of a long termed project started in 2005 and devoted to therecycling of this secondary raw materials in various industrial applications. KRY-AS can be added in medium-high percentages (10\u201340 wt%) to commercial mixtures for the production of clay bricks, rock-woolglasses for insulation as well as Ca-based frits and glass\u2013ceramics for the production of ceramic tiles. Thesecondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-basedpigment [Ca3Cr2(SiO4)3] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO5]. The latter is especiallyinteresting as a substitute for cadmium-based pigments. This work also shows that KRY-AS can replacestandard fillers in polypropylene plastics without altering the properties of the final product. For eachapplication, a description and relevant results are presented and discussed

The Effect of Zr Addition on Melting Temperature, Microstructure, Recrystallization and Mechanical Properties of a Cantor High Entropy Alloy

The effect of Zr addition on the melting temperature of the CoCrFeMnNi High Entropy Alloy (HEA), known as the “Cantor’s Alloy”, is investigated, together with its micro-structure, mechanical properties and thermomechanical recrystallization process. The base and Zr-modified alloys are obtained by vacuum induction melting of mechanically pre-alloyed powders. Raw materials are then cold rolled and annealed. recrystallization occurred during the heat treatment of the cold-rolled HEA. The alloys are characterized by X-ray diffraction, electron microscopy, thermal analyses, mechanical spectroscopy and indentation measures. The main advantages of Zr addition are: (1) a fast vacuum induction melting process; (2) the lower melting temperature, due to Zr eutectics formation with all the Cantor’s alloy elements; (3) the good chemical alloy homogeneity; and (4) the mechanical properties improvement of re-crystallized grains with a coherent structure. The crystallographic lattice of both alloys results in FCC. The Zr-modified HEA presents a higher recrystallization temperature and smaller grain size after recrystallization with respect to the Cantor’s alloy, with precipitation of a coherent second phase, which enhances the alloy hardness and strength

Stabilization and thermal conductivity of aqueous magnetite nanofluid from continuous flows hydrothermal microwave synthesis

Magnetite, Fe3O4, nanoparticles, synthesized by hydrothermal microwave assisted technique in continuous flow, are characterized by X-ray diffraction, FTIR and TEM. The suspension stabilization of the nanoparticles dispersed in aqueous media is evaluated by the zeta potential trend and particle size distribution. The effect of the pH, the addition of a phosphate based dispersant and the sonication time on the suspension stabilization are investigated in detail. Moreover, once identified the most stable nanofluid, its thermal properties are measured to evaluate its possible application as heat transfer fluid. The preliminary results indicate a significant enhancement of magnetite water based nanofluid thermal conductivity with respect to water (up to 25%) and conventional water based fluid