21 research outputs found

    Latest developments in silica-based thermoluminescence spectrometry and dosimetry

    Get PDF
    Using irradiated doped-silica preforms from which fibres for thermoluminescence dosimetry applications can be fabricated we have carried out a range of luminescence studies, the TL yield of the fibre systems offering many advantages over conventional passive dosimetry types. In this paper we investigate such media, showing emission spectra for irradiated preforms and the TL response of glass beads following irradiation to an Am-241-Be neutron source located in a tank of water, the glass fibres and beads offering the advantage of being able to be placed directly into liquid. The outcomes from these and other lines of research are intended to inform development of doped silica radiation dosimeters of versatile utility, extending from environmental evaluations through to clinical and industrial applications. (C) 2015 Elsevier Ltd. All rights reserve

    Safety radiation culture in research & education

    Get PDF

    Study on the Concentrations and Correlation Coefficient of Cadmium and Zinc in Human Teeth ICP-AES

    No full text
    Cadmium and zinc are the traceable elements in human teeth. These elements were analyzed by the technique of ICP-AES. The measurement results referred to the 199 samples of male and female donors, which were collected from the areas of Klang Valley and Malacca. ..

    Heavy metals accumulation in plants growing in ex tin mining catchment

    No full text
    The degree of contamination by heavy metals (arsenic, copper, lead, tin and zinc) in soil and transfer to plants has been studied. Specimens of plant species from five locations in an area of 10 x 10 m were sampled with their corresponding soils. Thirty six plant species including two shallow water aquatic plants were identified. Soil and plant specimens were analyzed by using inductively coupled plasma optical emission spectrometry. It was found that metal concentration in soil was highly variable while concentration of metals in plants directly depends on the concentration of metals it was rooted. Roots showed highest metal concentration followed by leaves, shoots and flowers. Bioconcentraion factor and translocation factor were calculated, representing Cyperus rotundus L. as a potential tin-hyperaccumulator plant, previously not reported in literature. Plant Species Imperata cylindrica , Lycopodium cernuum , Melastoma malabathricum , Mimosa pudica Linn , Nelumbo nucifera , Phragmites australis L., Pteris vittata L. and Salvinia molesta , were metal accumulator while Acacia podalyriaefolia G. Don, Bulb Vanisium , Dillenia reticulate King , Eugenia reinwardtiana , Evodia roxburghiania Hk. f. clarke, Gleichenia linearis , Grewia erythrocarpa Ridl., Manihot esculenta Crantz, Paspalum conjugatum Berguis , Passiflora suberosa , Saccharum officinarum , Stenochlaena palustris (Burm.) Bedd. and Vitis trifolia Linn. were tolerated plant species. All other studied plants were excluders. Identified plant species could be useful for revegetation and erosion control in metals contaminated ex-mining sites. Morphological changes such as reduction in size, change in color and deshaping have also been observed in plant species with high metal values

    Study of mango biomass (Mangifera indica L) as a cationic biosorbent

    No full text
    Unfertilizable fruiting buds of mango plant Mangifera Indica L, an agrowaste, is used as a biomass in this study. The efficacy of the biosorbent was tested for the removal of lead, copper, zinc and nickel metal ions using batch experiments in single and binary metal solution under controlled experimental conditions. It is found that metal sorption increases when the equilibrium metal concentration rises. At highest experimental solution concentration used ( 150 mg/L), the removal of metal ions were 82.76 % for lead, 76.60 % for copper, 63.35 % for zinc and 59.35 % for nickel while at lowest experimental solution concentration (25 mg/L), the removal of metal ions were 92.00% for lead, 86.84 % for copper, 83.96 % for zinc and 82.29 % for nickel. Biosorption equilibrium isotherms were plotted for metal uptake capacity (q) against residual metal concentrations (C(f)) in solution. The q versus C f sorption isotherm relationship was mathematically expressed by Langmuir and Freundlich models. The values of separation factor were between zero and one indicating favourable sorption for four tested metals on the biosorbent. The surface coverage values were approaching unity with increasing solution concentration indicating effectiveness of biosorbent under investigation. The non-living biomass of Mangifera indica L present comparable biosorption capacity for lead, copper, zinc and nickel metal ions with other types of biosorbent materials found in literature and is effective to remove metal ions from single metal solutions as well as in the presence of other co-ions with the main metal of solution

    Preliminary results on the photo-transferred thermoluminescence from Ge-doped SiO 2 optical fiber

    No full text
    A study is made of photo-transferred thermoluminescence (PTTL), the TL being induced by transferring charge carriers from deeper to more superficial traps through energetic light exposure. Potential applications include dose reassessment in radiation dosimetry and also as a useful tool for dating. With incomplete emptying of deep traps following first readout, subsequent UV exposure is shown to lead to charge transfer to more shallow traps. Using Ge-doped SiO2 optical fibers exposed to 60Co gamma rays, the PTTL from the medium has been characterized in terms of the stimulation provided by exposure to a UV lamp and duration of exposure, maximum read-out temperature and pre-gamma irradiation dose. Ge-doped SiO2 optical fibers of flat cross-sectional shape have been used in this study. The efficiency of dose reassessment was compared to that of the highly popular phosphor-based TL detector TLD-100. Results show the maximum temperature of readout to have no measurable effect on the PTTL signal. For doses from 20 to 500cGy, the method is shown to be effective using a UV lamp of wavelength 254nm, also being indicative of potential application for doses on either side of the range currently investigated. A study was also made of the effect of UV exposure time on PTTL, seeking to determine the greatest accessible sensitivity and lowest measurable dose

    A cell-based screening system for anti-influenza A virus agents

    No full text
    Emerging of drug resistant influenza A virus (IAV) has been a big challenge for anti-IAV therapy. In this study, we describe a relatively easy and safe cell-based screening system for anti-IAV replication inhibitors using a non-replicative strain of IAV. A nickel (II) complex of polyhydroxybenzaldehyde N4-thiosemicarbazone (NiPT5) was recently found to exhibit anti-inflammatory activity in vivo and in vitro. NiPT5 impedes the signaling cascades that lead to the activation of NF-κB in response to different stimuli, such as LPS and TNFα. Using our cell-based screening system, we report that pretreating cells with NiPT5 protects cells from influenza A virus (IAV) and vesicular stomatitis virus (VSV) infection. Furthermore, NiPT5 inhibits replication of IAV by inhibiting transcription and translation of vRNAs of IAV. Additionally, NiPT5 reduces IAV-induced type I interferon response and cytokines production. Moreover, NiPT5 prevents activation of NF-κB, and IRF3 in response to IAV infection. These results demonstrate that NiPT5 is a potent antiviral agent that inhibits the early phase of IAV replication

    Micro-PIXE analysis of doped SiO2 fibres intended as TL dosimeters for radiation measurements

    No full text
    Sample elemental concentrations can be determined using the microbeam proton-induced X-ray emission (PIXE) technique, providing non-destructive simultaneous low-background multi-element analysis. Present interest concerns analysis of Ge-doped SiO2 fibres intended as high spatial-resolution thermoluminescence (TL) dosimeters for radiation measurements in place of their more typical applications in telecommunications. During fibres fabrication, defined amounts of the Ge dopant are added, the dopant more usually having a determining role in the transmission properties of the fibre. Characteristic X-rays produced in PIXE analysis provide information on the relative distribution of elements within a sample, as in for instance Ge and Si concentrations, the Ge acting as point defect centres that promote TL. With the dopant tending to diffuse in and away from the fibre core, it is essential to define the sample matrix composition in order to accurately evaluate the X-ray yield. This is determined in part using simultaneous Rutherford Back Scattering analysis. In present work, PIXE/Rutherford Back Scattering measurements have been employed to ascertain dopant concentrations of fibres that have been fabricated at the University of Malaya with a view to improving TL yield. Present results concern cylindrical fibres, nominally with 4, 6 and 8 weight peak Ge concentrations and flat fibres of nominal 6 weight Ge concentration. For the cylindrical fibres, Ge dopant concentration has been found to be in the range of 2.41-4.56, 6.44-8.29 and 10.27-12.25 weight, respectively, while for the flat fibres, the Ge concentration range is broader, at 0.07-6.55 weight. Copyright (c) 2014 John Wiley & Sons, Ltd

    Factors affecting nucleolytic efficiency of some ternary metal complexes with DNA binding and recognition domains. Crystal and molecular structure of Zn(phen)(edda)

    No full text
    The binding selectivity of the M(phen)(edda) (M = Cu, Co, Ni, Zn; phen = 1,10-phenanthroline, edda = ethylenediaminediacetic acid) complexes towards ds(CG)(6), ds(AT)(6) and ds(CGCGAATTCGCG) B-form oligonucleotide duplexes were studied by CD spectroscopy and molecular modeling. The binding mode is intercalation and there is selectivity towards AT-sequence and stacking preference for A/A parallel or diagonal adjacent base steps in their intercalation. The nucleolytic properties of these complexes were investigated and the factors affecting the extent of cleavage were determined to be: concentration of complex, the nature of metal(11) ion, type of buffer, pH of buffer, incubation time, incubation temperature, and the presence of hydrogen peroxide or ascorbic acid as exogenous reagents. The fluorescence property of these complexes and its origin were also investigated. The crystal structure of the Zn(phen)(edda) complex is reported in which the zinc atom displays a distorted trans-N4O2 octahedral geometry; the crystal packing features double layers of complex molecules held together by extensive hydrogen bonding that inter-digitate with adjacent double layers via pi...pi interactions between 1,10-phenanthroline residues. The structure is compared with that of the recently described copper(II) analogue and, with the latter, included in molecular modeling. (C) 2008 ELsevier Inc. All rights reserved
    corecore