1,146 research outputs found

    easySTORM: a robust, lower-cost approach to localisation and TIRF microscopy

    Get PDF
    TIRF and STORM microscopy are super-resolving fluorescence imaging modalities for which current implementations on standard microscopes can present significant complexity and cost. We present a straightforward and low-cost approach to implement STORM and TIRF taking advantage of multimode optical fibres and multimode diode lasers to provide the required excitation light. Combined with open source software and relatively simple protocols to prepare samples for STORM, including the use of Vectashield for non-TIRF imaging, this approach enables TIRF and STORM imaging of cells labelled with appropriate dyes or expressing suitable fluorescent proteins to become widely accessible at low cost

    Clinical Application of Ultra-High-Frequency Ultrasound

    Get PDF
    Musculoskeletal ultrasound involves the study of many superficial targets, especially in the hands, wrists, and feet. Many of these areas are within the first 3 cm of the skin surface and are ideal targets for ultra-high-frequency ultrasound. The high spatial resolution and the superb image quality achievable allow foreseeing a wider use of this novel technique, which has the potential to bring innovation to diagnostic imaging

    Reconstructing historic Glacial Lake Outburst Floods through numerical modelling and geomorphological assessment:Extreme events in the Himalaya

    Get PDF
    Recession of high‐mountain glaciers in response to climatic change frequently results in the development of moraine‐dammed glacial lakes. Moraine dam failure is often accompanied by the release of large volumes of water and sediment, termed a Glacial Lake Outburst Flood (GLOF). Chukhung Glacier is a small (~3 km2) receding valley glacier in Mt. Everest (Sagarmatha) National Park, Nepal. Unlike many Himalayan glaciers, which possess a thick mantle of supraglacial debris, its surface is relatively clean. The glacier terminus has receded 1.3 km from its maximum Holocene position, and in doing so provided the space for an ice‐contact moraine‐dammed lake to develop. The lake had a maximum volume of 5.5 × 105 m3 and drained as a result of breaching of the terminal moraine. An estimated 1.3 × 105 m3 of material was removed from the terminal moraine during breach development. Numerical dam‐breach modelling, implemented within a Generalised Likelihood Uncertainty Estimation (GLUE) framework, was used to investigate a range of moraine‐dam failure scenarios. Reconstructed outflow peak discharges, including failure via overtopping and piping mechanisms, are in the range 146–2200 m3 s‐1. Results from two‐dimensional hydrodynamic GLOF modelling indicate that maximum local flow depths may have exceeded 9 m, with maximum flow velocities exceeding 20 m s‐1 within 700 m of the breach. The floodwaters mobilised a significant amount of material, sourced mostly from the expanding breach, forming a 300 m long and 100 m wide debris fan originating at the breach exit. moraine‐dam. These results also suggest that inundation of the entire floodplain may have been achieved within ten minutes of initial breach development, suggesting that debris fan development was rapid. We discuss the key glaciological and geomorphological factors that have determined the evolution of a hazardous moraine‐dammed lake complex and the subsequent generation of a GLOF and its geomorphological impact

    Superconformal Flavor Simplified

    Get PDF
    A simple explanation of the flavor hierarchies can arise if matter fields interact with a conformal sector and different generations have different anomalous dimensions under the CFT. However, in the original study by Nelson and Strassler many supersymmetric models of this type were considered to be 'incalculable' because the R-charges were not sufficiently constrained by the superpotential. We point out that nearly all such models are calculable with the use of a-maximization. Utilizing this, we construct the simplest vector-like flavor models and discuss their viability. A significant constraint on these models comes from requiring that the visible gauge couplings remain perturbative throughout the conformal window needed to generate the hierarchies. However, we find that there is a small class of simple flavor models that can evade this bound.Comment: 43 pages, 1 figure; V3: small corrections and clarifications, references adde

    Prevalence of overweight and obesity in children aged 6–13 years—alarming increase in obesity in Cracow, Poland

    Get PDF
    This study in children aged 6–13 years (n = 1,499) was performed between October 2008 and March 2009. Height and weight measurements were taken to calculate BMI. The prevalence of overweight and obesity was determined by means of IOTF cut-offs with respect to age. Alarming is the fact that the percentage of obese children in Cracow increased dramatically from 1.04% in boys and 0.20% in girls in 1971 to 7% in boys and 3.6% in girls in 2009. In this report, a higher percentage of overweight boys was observed in rural boys (28.14%) than in urban ones (27.31%). Obesity was identified in an almost twice as high percentage of urban boys (7.78%) as in rural ones (3.52%). A higher percentage of overweight girls was registered in rural areas (16.49%) than in urban ones (16.09%). Obesity was prevailing in rural girls (4.12%) relative to their urban counterparts (3.44%). The highest number of overweight urban boys was diagnosed in the group of 12-year-olds (n = 48) and rural boys in the group of 10-year-olds (n = 39), as well as in urban girls aged 11 (n = 17) and rural girls aged 9 (n = 9). The highest number of obesity was observed in rural boys aged 12 (n = 3) and in urban boys aged 9 and 10 (n = 9 in both groups). In the group of girls, obesity prevailed in urban 9-year-olds (n = 5) and in rural 7-year-olds (n = 5). Conclusions: Overweight and obesity affect boys almost twice as frequently as girls. Obesity is twice as frequent in urban boys as in their rural peers

    National Assessment of Human Health Effects of Climate Change in Portugal: Approach and Key Findings

    Get PDF
    In this study we investigated the potential impact of climate change in Portugal on heat-related mortality, air pollution–related health effects, and selected vectorborne diseases. The assessment used climate scenarios from two regional climate models for a range of future time periods. The annual heat-related death rates in Lisbon may increase from between 5.4 and 6 per 100,000 in 1980–1998 to between 8.5 and 12.1 by the 2020s and to a maximum of 29.5 by the 2050s, if no adaptations occur. The projected warmer and more variable weather may result in better dispersion of nitrogen dioxide levels in winter, whereas the higher temperatures may reduce air quality during the warmer months by increasing tropospheric ozone levels. We estimated the future risk of zoonoses using ecologic scenarios to describe future changes in vectors and parasites. Malaria and schistosomiasis, which are currently not endemic in Portugal, are more sensitive to the introduction of infected vectors than to temperature changes. Higher temperatures may increase the transmission risk of zoonoses that are currently endemic to Portugal, such as leishmaniasis, Lyme disease, and Mediterranean spotted fever
    corecore