A one-step route to solubilised, purified or functionalised single-walled carbon nanotubes

Reductive dissolution is a promising processing route for single walled carbon nanotubes (SWCNTs) that avoids the damage caused by ultrasonication and aggressive oxidation whilst simultaneously allowing access to a wealth of SWCNT functionalisation reactions. Here, reductive dissolution has been simplified to a single one-pot reaction through the use of sodium naphthalide in dimethylacetamide allowing direct synthesis of SWCNT Na(+) solutions. Gram quantities of SWCNTs can be dissolved at concentrations over 2 mg mL(–1). These reduced SWCNT solutions can easily be functionalised through the addition of alkyl halides; reducing steric bulk of the grafting moiety and increasing polarisability of the leaving group increases the extent of functionalisation. An optimised absolute sodium concentration of 25 mM is shown to be more important than carbon to metal ratio in determining the maximum degree of functionalisation. This novel dissolution system can be modified for use as a non-destructive purification route for raw SWCNT powder by adjusting the degree of charging to dissolve carbonaceous impurities, catalyst particles and defective material, before processing the remaining SWCNTs

Giant cationic polyelectrolytes generated via electrochemical oxidation of single-walled carbon nanotubes

Previously, reduced single-walled carbon nanotube anions have been used for effective processing and functionalization. Here we report individually separate and distinct (that is, discrete) single-walled carbon nanotube cations, directly generated from a pure anode using a non-aqueous electrochemical technique. Cyclic voltammetry provides evidence for the reversibility of this nanoion electrochemisty, and can be related to the complex electronic density of states of the single-walled carbon nanotubes. Fixed potentiostatic oxidation allows spontaneous dissolution of nanotube cations ('nanotubium'); Raman spectroscopy and transmission electron microscopy show that sequential fractions are purified, separating amorphous carbon and short, defective single-walled carbon nanotubes, initially. The preparation of nanotubium, in principle, enables a new family of nucleophilic grafting reactions for single-walled carbon nanotubes, exploited here, to assemble nanotubes on amine-modified Si surfaces. Other nanoparticle polyelectrolyte cations may be anticipated

Confocal microscopy for in situ multi-modal characterization and patterning of laser-reduced graphene oxide

Graphene oxide (GO) films can be readily prepared at wafer scale, then reduced to form graphene-based conductive circuits relevant to a range of practical device applications. Among a variety of reduction methods, laser processing has emerged as an important technique for localized reduction and patterning of GO films. In this study, the novel use of confocal microscopy is demonstrated for high-resolution characterization, in situ laser reduction, and versatile patterning of GO films. Multi-modal imaging and real-time tracking are performed with 405 and 488 nm lasers, enabling large-area direct observation of the reduction progress. Using image analysis to cluster flake types, the different stages of reduction can be attributed to thermal transfer and accumulation. Delicate control of the reduction process over multiple length scales is illustrated using millimeter-scale stitched patterns, micropatterning of single flakes, and direct writing conductive 2D wires with sub-micrometer resolution (530 nm). The general applicability of the technique is shown, allowing fabrication of both conductive reduced graphene oxide (rGO) films (sheet resistance: 2.5 kOhm sq−1) and 3D microscale architectures. This simple and mask-free method provides a valuable tool for well-controlled and scalable fabrication of reduced GO structures using compact low-power lasers (< 5 mW), with simultaneous in situ monitoring and quality control

Multifunctional Structural Supercapacitor Composites Based on Carbon Aerogel Modified High Performance Carbon Fiber Fabric

It is well documented that bedrest has adverse outcomes for hospitalized patients. This is especially true for critically ill patients due to life support measures, invasive catheters, and mechanical ventilation. Consequences associated with bedrest in critical care patients include venous thromboembolism, ventilator associated pneumonia, pressure ulcer development, and muscle weakness. Respiratory muscle weakness is associated with prolonged ventilator support and delayed extubation. The Awakening and Breathing Coordination, Delirium Monitoring and Management, and Early Mobility (ABCDE) bundle uses evidence based practice to prevent and treat ICU acquired delirium and weakness. The bundle aims to do this by standardizing care processes in collaboration with the ICU team to promote early mobility in ventilated patients. The purpose of this research study was to determine if the implementation of an early mobility protocol decreased the number of ventilator days for patients who receive mechanical ventilation. A retrospective chart review was conducted at a 16 bed ICU. Group A included 30 subjects (n=30) who were treated pre implementation of the ABCDE bundle and Group B included 39 (n=39) subjects who were treated post implementation of the ABCDE bundle. There were less average ventilator days found in Group A in comparison to Group B. Additionally, there was a significant difference found in the ICU length of stay pre implementation (M=9.4, SD=4.4) and post implementation (M=5.7, SD=2.6) of the ABCDE bundle for early mobility, t (65) =4.3, p = 0.00005. The APRN can use the evidence in the ABCDE bundle to guide care to critically ill patients that are mechanically ventilated. Utilizing the ABCDE bundle additionally allows the APRN to be instrumental in improving patient outcomes through interdisciplinary collaboration

Thermal decomposition of ternary sodium graphite intercalation compounds

Graphite intercalation compounds (GICs) are often used to produce exfoliated or functionalised graphene related materials (GRMs) in a specific solvent. This study explores the formation of the Na-tetrahydrofuran (THF)-GIC and a new ternary system based on dimethylacetamide (DMAc). Detailed comparisons of in situ temperature dependent XRD with TGA-MS and Raman measurements reveal a series of dynamic transformations during heating. Surprisingly, the bulk of the intercalation compound is stable under ambient conditions, trapped between the graphene sheets. The heating process drives a reorganisation of the solvent and Na molecules, then an evaporation of the solvent; however, the solvent loss is arrested by restacking of the graphene layers, leading to trapped solvent bubbles. Eventually, the bubbles rupture, releasing the remaining solvent and creating expanded graphite. These trapped dopants may provide useful property enhancements, but also potentially confound measurements of grafting efficiency in liquid-phase covalent functionalization experiments on 2D materials