Strong Subordination for E -valent Functions Involving the Operator Generalized Srivastava-Attiya

          الموضوع المقدم في هذا البحث  يتضمن التحري عن  بعض العلاقات  وبعض الخواص المهمة  للدوال متعددة التكافوء التي تتعامل مع موثر(( Srivastava-Attiyaالمعمم بواسطة استخدام  مبادئ  التبعية التفاضلية القوية.Some relations of inclusion and their properties are investigated for functions of type " -valent that involves the generalized operator of Srivastava-Attiya by using the principle of strong differential subordination

linear derivative operator with differential subordination of meromorphic ε -valent functions

The present paper is to investigate some inclusion relations  between the  linear      derivative operator  and differential subordination with other interesting properties for ............. Keywords: Meromorphic functions , differential subordination, the  linear derivative operator. DOI: 10.7176/MTM/9-2-0

Impact of Substitute Portland Cement with CKD on the Mechanical and Durability Characteristics of Cement Mortar

Cement mortar is a binding material that is made of cement, sand and water. In general, mixes of mortar are made of raw materials. However, using raw materials in producing mortar leads to many environmental and economic issues. One of the most common solutions to reduce these issues is replacing raw materials by waste and/or by-product materials; especially replacing cement. The aim of this research is to explore the characteristics of mortar mixes after partially replacing Ordinary Portland Cement (OPC) by Cement Kiln Dust (CKD) at three percentages (10%, 20% and 30%) in terms of initial and final setting time, compressive strength and Ultrasonic Pulse Velocity (UPV). The control mortar specimen (mortar containing OPC only) results were adopted for comparison with results of mortar mixes that incorporated CKD. Results showed that increment in CKD replacement percentages led to a decrement in the compressive strength and UPV and an increment in the setting time

The impact of grinding time on properties of cement mortar incorporated high volume waste paper sludge ash

Cement is considered a base material in preparing blending mixtures that applying in various projects in the civil engineering field. Nevertheless, the cement production process cause indubitable negative environmental influences such as emitting CO2. The production of cement produces around 7% of the global CO2 emissions. Thus, searching for alternate binders in building processes to minimise or substitute cement has been one of the social problems. A by-product or waste products are among the potential alternatives to the mentioned problem. The present investigation involves the consumption of paper sludge ash (PSA) waste as cement replacement to produce environmentally friendly, cementitious material. Limited studies were addressed the PSA grinding time impact on mortar or concrete properties. Moreover, limited studies replaced the cement with high volume of PSA. Therefore, during this study, the effect of grinding time and replacement level (up to 50%) of the PSA on the surface electrical resistivity and compressive strength of mortar were investigated. Three grinding periods (in addition to without grinding), two replacement levels and three testing ages were considered. The results indicated that grinding the PSA for 10 minutes and use it to replace up to 50% of the cement content have similar mechanical and durability performance to ordinary Portland cement after 28 curing days. This innovative binder will also cause a major difference in decreasing the building materials cost and CO2 emissions

Early age assessment of cement mortar incorporated high volume fly ash

The technique of replacing the cement with other alternative materials focuses on the production of materials with similar performance and reduced environmental impacts relative to traditional cement. The main aim of this study is to investigate the effect of replacing the cement content with high volume of Pulverised Fuel Ash (PFA) on the mechanical performance of cement mortar. Three mixtures were prepared with different percentages of PFA (20%, 40% and 60%) as replacement of cement along with other mixture that made with 100% cement as a control mixture. In order to evaluate the performance of the cement mortars, compressive strength and Ultrasonic Pulse Velocity (UPV) tests after 7, 14 and 28 days of curing was used. The results indicated that for all ages of curing, the increase of PFA contents caused a reduction in the compressive strength and UPV in comparison with the control mixture. After 28 days of curing, the results indicated that the mixture incorporated 20% PFA has similar UPV value relative to the control mixture. Such findings will significantly contribute in reducing the cost of the produced mortar by reducing the amount of used cement and this consequently reduce the cement demands/manufacturing. Less production of cement will reduce the Carbon Dioxide (CO2) emissions of the cement industry

Production of Ternary Blend Binder as an Alternative to Portland Cement

Environmental pollution and the relatively high cost of waste disposal have been a major focus for scientists around the world, leading researchers to find a solution to reuse waste materials in different applications. Additionally, landfills are considered one of the biggest crisis facing the Iraqi government. Therefore, this study aims to present a new ternary mixture that consists of OPC in addition to Pulverized Fuel Ash (PFA), Ground Granulated Blast Furnace Slag (GGBS) by utilizing it as a partial substitution of cement. A new ternary mortar mixtures containing four substitution levels of cement with GGBS and PFA (0%, 30 %, 50% and 70% by weight) were carried out. The Ultrasonic Pulse Velocity (UPV) and compressive strength tests were adopted to show the influence of GGBS and PFA on mechanical features of cement mortar. Findings indicated that, the compressive strength values were reduced with increasing the GGBS and PFA proportions at all curing ages. For 70% replacement, the compressive strength values were the lowest values comparison with that for control specimens. In contrast, the GGBS and PFA had a negative and positive impacts on the UPV of mortar depending on the substitution ratio. At 30 % substitution levels, the velocity value was enhanced, while other substitution ratios affected negatively on the UPV values

Impact of high volume GGBS replacement and steel bar length on flexural behaviour of reinforced concrete beams

The Ordinary Portland Cement (OPC) is one of the major ingredient utilized for the manufacture of concrete. The manufacturing of cement includes the release of huge amounts of CO2 gas as a main contributor for greenhouse influence and global warming. Several researchers have investigated the characteristics of OPC concrete utilizing cementitious materials like fly ash, silica fume, and Ground Granulated Blast furnace Slag (GGBS) as replacement materials. The article aims to investigate experimentally the flexural behavior of concrete beams with GGBS. The experimental work was divided into three stages, the first one consists of six reinforced concrete beam specimens with (0%, 40% and 60%) of GGBS. During this stage, the used steel bars were 8 mm diameter and 500 mm in length. In the second stage, the length of the steel bars was reduced to 400 mm with the best mixture of (GGBS+OPC) that obtained from stage 1. In the third stage, the best length of steel bars was used with the best (GGBS+OPC) ratio to be tested at 7, 14 and 28 days from the date of casting. Consequences of this exploration suggests that replacement of OPC with 40 percent GGBS with 500 mm steel bar length can be used in reinforced concrete specimens as it shows comparable results relative to control mixtures (0% GGBS)

Effect of Clay Brick Waste Powder on the Fresh and Hardened Properties of Self-Compacting Concrete: State-of-the-Art and Life Cycle Assessment

Sustainability and reducing environmental damage caused by CO2 emissions have become issues of interest to researchers in the construction sector around the world. Reducing the cement content in concrete by partially substituting it with by-products or waste falls within this field as the cement industry is responsible for 7% of global CO2 emissions. On the other hand, self-compacting concrete (SCC) is one of the special types of concrete that contains a large amount of powder (most of which is cement) to ensure its flow under the influence of its weight without separating its components. Therefore, to produce eco-friendly SCC, many researchers have replaced part of the cement with clay brick waste powder (CBWP) since brick units are among the most widely used building materials after concrete. Accordingly, this study aims to review previous research that included using CBWP in SCC. The effect of these wastes on the fresh, mechanical, durability and microstructural properties of cement was reviewed. Additionally, a comparison between the environmental impacts of SCCs with different CBWP contents has been conducted using the life cycle assessment (LCA) approach. It was found that the highest value of CBWP that can be used without negatively affecting the different properties of concrete is 10% by weight of cement. Moreover, regarding environmental impact, using CBWP as a substitute for cement reduces environmental damage, and the lowest environmental impact that can be achieved per strength unit (MPa) is 37.5%

The Impact of Using Different Ratios of Latex Rubber on the Characteristics of Mortars Made with GGBS and Portland Cement

Preserving natural resources and implementing the concepts of sustainable engineering to approach the zero waste concept helped in reducing the detrimental environmental effects in the last two-decade. Proposed re-using of Ground Granulated Blast Furnace Slag (GGBS) as an alternate solution is to get rid of them and profit from them concurrently. In this process, GGBS is used as cement substitute material to enhance mortar characteristics. On the other hand, the required water for concrete mixture should be characterized by several characters, which similar to drinkable water, therefore, using of Latex Rubber as a water substitution reduces the demand for such water in the construction industry. In this project, percentages of GGBS that have been used were 0%, 10%, 30%, and 50% which compatible with (0, 10, 20 and 30) % of Latex Rubber. Suitable tests were performed to measure properties of mortar by GGBS and Latex Rubber such as setting time, compressive strength and Permeability test (Electrical resistivity). The results obtained indicate that the setting time reduced with increasing Rubber Latex in spite of increasing the proportion of water to binder. Additionally, increasing the Latex Rubber amount leads to decrease the compressive strength and electrical resistivity of mortars

Influence of High Volume RHA on Properties of Cement Mortar

This work study the impact of partial cement replacement by high volume Rice Husk Ash (RHA) on some characteristics of cement mortar like compressive strength and flexural strength at different ages. In this research, RHA was used in three different ratios (20, 40, and 60)% as a cement substitution and the findings were compared with control mixture (0% RHA). The findings demonstrated that the replacement of cement by RHA reduced the compressive strength of all selected ratios and the increase in the content of RHA lead to reduce compressive strength comparative to control sample with 100% cement as a binder at all ages. However, the flexural strength results indicated that the RHA in 20% showed approximately same results as control sample at early ages while increasing the curing period lead to improve flexural strength. Increasing RHA higher than 20% lead to decrease Flexural strength at all selected ages