Preparation and structure characterization of soluble bone collagen peptide chelating calcium

In this study, G-25 gel chromatography, X-diffraction, scanning electron microscopy (SEM), UV and Fourier transform infrared spectroscopy (FTIR) were used to analyze soluble collagen peptides chelating calcium. Collagen peptide hydrolysis can be divided into four components using G-25 gel chromatography. Each component of calcium binding capacity was different and the components whose molecular weight was less than 5000 Da had a relatively high calcium binding capacity. In the infrared spectra experimental certification, after the collagen peptides had combined with calcium, amide I, II wave number was displaced, which indicated that amino nitrogen atoms and oxygen atoms on the carboxyl groups were involved in chelation. In the UV scan spectra, the characteristic absorption peak of the collagen peptide’s carbonyl and the peptide bond was clearly shifted, indicating that collagen peptides have reacted with calcium. In SEM spectra, a lot of white grains were seen to be "embedded" clearly in the surface of the collagen peptide, indicating that besides the reaction of coordination between collagen peptides and calcium, there was a certain degree of adsorption. After combination with calcium, the X-ray diffraction spectra showed that the no rules non-crystal structure collagen peptides turned into rules crystal structure. According to the structure analysis which showed that collagen peptide chelated calcium is a five-membered ring structure, calcium is in the center and was combined strongly with both the amino- and carboxyl-group.Key words: Bone, calcium binding, molecular weight, collagen peptide

Subpixel Temperature Measurements in Plasma Jet Environments Using High-Speed Multispectral Pyrometry

A high-speed (2 kHz) near-infrared (1.0-1.65 mu m) multispectral pyrometer was used for noninvasive measurements of the subpixel temperature distribution near the sharp leading edge of a wing exposed to a supersonic plasma jet. The multispectral pyrometer operating in the field measurement mode was able to measure the spatial temperature distribution. Multiple spectra were used to determine the temperature distributions in the measurement region. The spatial resolution of the multispectral pyrometer was not restricted to one &quot;pixel&quot; but was extended to subpixel accuracy (the temperature distribution inside one pixel in the image space corresponding to the point region in the object space). Thus, this system gives high-speed, multichannel, and long working time spatial temperature measurements with a small data stream from high-speed multispectral pyrometers. The temperature distribution of the leading edge of a ceramic wing was investigated with the leading edge exposed to extreme convective heating from a high-enthalpy plasma flow. Simultaneous measurements with a multispectral pyrometer and an imaging pyrometer verify the measurement accuracy of the subpixel temperature distribution. Thus, this multispectral pyrometry can provide in situ noninvasive temperature diagnostics in supersonic plasma jet environments.</p

Predictive factors for extracorporeal shockwave lithotripsy success in ureteric stones, does skin-stone distance and hounsfield unit matter?

OBJECTIVE: To evaluate the usefulness of measuring stone skin distance and stone attenuation values by non-contrast computed tomography for predicting treatment outcome of ureteric stones by extracorporeal shockwave lithotripsy (ESWL). PATIENT AND METHOD : Retrospective review of 66 patients who underwent ESWL for ureteric stones with pre-ESWL NCCT in 2010–2012. Subjects were stratified into 2 groups, successful ESWL and failed ESWL, with ESWL success defined as stone fragment less than 4 mm at 6 weeks after ESWL. Patient age, sex, stone size, stone location, laterality, shockwave energy, number of shockwave administered, Hounsfield unit (HU), skin to stone distance (SSD), presence of hydronephrosis, pre-ESWL JJ stent or PCN were studied as predictive factors. RESULTS : Patient demographics and stone characteristics were similar between the 2 groups. On univariate analysis, the mean stone size for successful ESWL was 7.9 mm compared with 10.2 mm in the failure group (P = 0.02). For the skin-stone distance, the mean distance for the successful group was 95 mm compared with 104 mm in the failure group (P = 0.04). Concerning the Hounsfield Unit, a mean of 1034 HU was found in the successful compared with 1129 HU in the failure group (P = 0.16) CONCLUSION : Skin to stone distance on non-contrast CT scan is a useful predictive factors for ESWL success for ureteric stones.postprin

Sonic hedgehog regulates the proliferation, differentiation, and migration of enteric neural crest cells in gut

Enteric neural crest cells (NCCs) migrate and colonize the entire gut and proliferate and differentiate into neurons and glia of the enteric nervous system in vertebrate embryos. We have investigated the mitogenic and morphogenic functions of Sonic hedgehog (Shh) on enteric NCCs in cell and organ culture. Enteric NCCs expressed Shh receptor Patched and transcripts encoding the Shh signal transducer (Gli1). Shh promoted the proliferation and inhibited the differentiation of NCCs. The pro-neurogenic effect of glial cell line-derived neurotrophic factor (GDNF) on NCCs was abolished by Shh. In gut explants, NCCs migrated from the explants onto the adjacent substratum if GDNF was added, whereas addition of Shh abolished this migration. Neuronal differentiation and coalescence of neural crest-derived cells into myenteric plexuses in explants was repressed by the addition of Shh. Our data suggest that Shh controls the proliferation and differentiation of NCCs and modulates the responsiveness of NCCs toward GDNF inductions.published_or_final_versio

Design of a wireless passive sensing system for impact detection of aerospace composite structures

In this paper, the design and implementation of a novel on-board wireless passive sensing system for impact detection of composite airframe is presented for the first time. Several modules, including filtering, impact detection, local processing and wireless transmission are designed and evaluated for detecting rare, random and transitory impact events. An event-triggered mechanism with high responsiveness is adopted to reduce the system power dissipation and to maintain the detection effectiveness. This design allows the system to be adaptive, energy-efficient and highly responsive to impacts. The whole system was implemented in an experimental study, and the effectiveness was evaluated and illustrated. The system was woken up by impact events in around 12 µs, and the impact data were recorded at 200 kHz (up to 5.33 MHz). This work provides a guideline for low-power, high-responsiveness passive on-board sensing system design. This system can also be adapted to other sensing applications in aerospace engineering

Numerical and experimental investigations of interdigital transducer configurations for efficient droplet streaming and jetting induced by surface acoustic waves

Surface acoustic wave (SAW) based technologies have recently been explored for various sensing and microfluidic applications, and numerous experimental studies and numerical modelling of SAW streaming and liquid-solid interactions have been performed. However, the large deformation of droplet interface actuated by SAWs has not been widely explored, mainly due to the complex physics of SAW-droplet interactions and interfacial phenomena. In this paper, a computational interface tracking method is developed based on the couple level set the volume of fluid (CLSVOF) approach to simulate the interactions between liquid and acoustic waves and deformation of the liquid-air surface. A dynamic contact angle boundary condition is developed and validated by experimental results to simulate the three-phase contact line dynamics. The modified CLSVOF method is then used to study the droplet jetting and internal streaming behaviours by analyzing the energy terms within the liquid medium. Furthermore, by applying the numerical model, effects of configurations and positions of two interdigital transducers (IDTs) on droplet actuation have been investigated to achieve efficient mixing, separation, and jetting. Results show that two perfectly aligned IDTs are optimal for mixing applications. In contrast, two offset IDTs are optimal for concentration and separation applications. The maximum jetting velocity and minimum jetting time are achieved by using a pair of aligned IDTs, whereas by using the two offset IDTs, effective liquid mixing and jetting are observed which can be used in bioprinting applications

Dynamic Behavior of Droplet Impact on Inclined Surfaces with Acoustic Waves

Droplet impact on arbitrary inclined surfaces is of great interest for applications such as antifreezing, self-cleaning, and anti-infection. Research has been focused on texturing the surfaces to alter the contact time and rebouncing angle upon droplet impact. In this paper, using propagating surface acoustic waves (SAWs) along the inclined surfaces, we present a novel technique to modify and control key droplet impact parameters, such as impact regime, contact time, and rebouncing direction. A high-fidelity finite volume method was developed to explore the mechanisms of droplet impact on the inclined surfaces assisted by SAWs. Numerical results revealed that applying SAWs modifies the energy budget inside the liquid medium, leading to different impact behaviors. We then systematically investigated the effects of inclination angle, droplet impact velocity, SAW propagation direction, and applied SAW power on the impact dynamics and showed that by using SAWs, droplet impact on the nontextured hydrophobic and inclined surface is effectively changed from deposition to complete rebound. Moreover, the maximum contact time reduction up to ∼50% can be achieved, along with an alteration of droplet spreading and movement along the inclined surfaces. Finally, we showed that the rebouncing angle along the inclined surface could be adjusted within a wide range

Surface Acoustic Waves to Control Droplet Impact onto Superhydrophobic and Slippery Liquid-Infused Porous Surfaces

Superhydrophobic coatings and slippery liquid-infused porous surfaces (SLIPS) have shown their potentials in self-cleaning, anti-icing, anti-erosion, and antibiofouling applications. Various studies have been done on controlling the droplet impact on such surfaces using passive methods such as modifying the lubricant layer thickness in SLIPS. Despite their effectiveness, passive methods lack on-demand control over the impact dynamics of droplets. This paper introduces a new method to actively control the droplet impact onto superhydrophobic and SLIPS surfaces using surface acoustic waves (SAWs). In this study, we designed and fabricated SLIPS on ZnO/aluminum thin-film SAW devices and investigated different scenarios of droplet impact on the surfaces compared to those on similar superhydrophobic-coated surfaces. Our results showed that SAWs have insignificant influences on the impact dynamics of a porous and superhydrophobic surface without an infused oil layer. However, after infusion with oil, SAW energy could be effectively transferred to the droplet, thus modifying its impact dynamics onto the superhydrophobic surface. Results showed that by applying SAWs, the spreading and retraction behaviors of the droplets are altered on the SLIPS surface, leading to a change in a droplet impact regime from deposition to complete rebound with altered rebounding angles. Moreover, the contact time was reduced up to 30% when applying SAWs on surfaces with an optimum oil lubricant thickness of ∼8 μm. Our work offers an effective way of applying SAW technology along with SLIPS to effectively reduce the contact time and alter the droplet rebound angles

Non-Abelian statistics and topological quantum information processing in 1D wire networks

Topological quantum computation provides an elegant way around decoherence, as one encodes quantum information in a non-local fashion that the environment finds difficult to corrupt. Here we establish that one of the key operations---braiding of non-Abelian anyons---can be implemented in one-dimensional semiconductor wire networks. Previous work [Lutchyn et al., arXiv:1002.4033 and Oreg et al., arXiv:1003.1145] provided a recipe for driving semiconducting wires into a topological phase supporting long-sought particles known as Majorana fermions that can store topologically protected quantum information. Majorana fermions in this setting can be transported, created, and fused by applying locally tunable gates to the wire. More importantly, we show that networks of such wires allow braiding of Majorana fermions and that they exhibit non-Abelian statistics like vortices in a p+ip superconductor. We propose experimental setups that enable the Majorana fusion rules to be probed, along with networks that allow for efficient exchange of arbitrary numbers of Majorana fermions. This work paves a new path forward in topological quantum computation that benefits from physical transparency and experimental realism.Comment: 6 pages + 17 pages of Supp. Mat.; 10 figures. Supp. Mat. has doubled in size to establish results more rigorously; many other improvements as wel

Wide range of droplet jetting angles by thin-film based surface acoustic waves

Nozzleless jetting of droplets with different jetting angles is a crucial requirement for 2D and 3D printing/bioprinting applications, and Rayleigh mode surface acoustic waves (SAWs) could be a potential technique for achieving this purpose. Currently, it is critical to vary the jetting angles of liquid droplets induced by SAWs and control the liquid jet directions. Generally, the direction of the liquid jet induced by SAWs generated from a bulk piezoelectric substrate such as LiNbO_{3} is along the theoretical Rayleigh angle of ∼22°. In this study, we designed and manufactured thin-film SAW devices by depositing ZnO films on different substrates (including silicon and aluminium) to realize a wide range of jetting angles from ∼16° to 55° using propagating waves generated from one interdigital transducer. We then systematically investigated different factors affecting the jetting angles, including liquid properties, applied SAW power and SAW device resonant frequency. Finally, we proposed various methods using thin-film SAW devices together with different transducer designs for realizing a wide range of jetting angles within the 3D domain. A nozzleless jetting method is proposed using thin-film based surface acoustic wave devices to achieve a wide range of jetting angles for droplets