256 research outputs found
EFFECT OF FORMING PRESSURE ON THE REACTIVITY AND MICROSTRUCTURE OF ZIRCON POWDER COMPACTS
Preliminary results of a study on the effects of the forming pressure on the reactivity, sintering and microstructure of very fine natural zircon powder compacts. The effects of compaction pressure on the green densities and sintered densities are also discussed. The relationship between the density and the compaction pressure governs the mechanism that occurs in the consolidation process. The investigation has demonstrated changing the compaction
pressure in the range 45-180MPa does not influence the onset temperature of sintering of powdered zircon (1150-1170 °C) but does influence the apparent density of the green compacts and consequently the porosity of the sintered specimens. Low relative density values were obtained in these sintering conditions
Electrical properties and microstructure of glass-ceramic materials from CaO-MgO-Al2O3-SiO2 system
The electrical (volume conductivity) and dielectric (loss factor and dielectric constant) properties of glass-ceramics belonging to the CaO-MgO-Al2O3-SiO2 system have been studied, as a function of microstructure, in their glassy and ceramized forms on samples obtained as bulk materials or sintered powders. A possible application of these materials as substrates for electronic devices can be envisaged, on account of their low conductivities (<10(-14) Scm(-1) up to 250 degrees C), loss factor and permittivity values
CRYSTALLIZATION OF SOME ANORTHITE DIOPSIDE GLASS PRECURSORS
Anorthite and diopside have been obtained from complete devitrification of glasses belonging to the quaternary system MgO-CaO-Al2O3-SiO2. Microstructure, the natural trend of the nucleation mechanism and kinetic studies on the crystallization phenomenon have been investigated by means of optical and electron microscopies, thermal and thermomechanical techniques and X-ray powder diffractometry. All the glasses investigated show a complete crystallization starting from a simple surface nucleation process. The activation energy for the crystallization process proved to be higher than that for viscous flow, leading to an important aspect modification in the sample during ceramization. Thermal stability and physical properties of both glass and glass-ceramic materials have been tested, suggesting the possible use of these materials in industrial application
Microstructure-based thermo-mechanical modelling of thermal spray coatings
This paper demonstrates how microstructure-based finite element (FE) modelling can be used to interpret and predict the thermo-mechanical behaviour of thermal spray coatings. Validation is obtained by comparison to experimental and/or literature data.Finite element meshes are therefore constructed on SEM micrographs of high velocity oxygen-fuel (HVOF)-sprayed hardmetals (WC-CoCr, WC-FeCrAl) and plasma-sprayed Cr2O3, employed as case studies. Uniaxial tensile tests simulated on high-magnification micrographs return micro-scale elastic modulus values in good agreement with depth-sensing Berkovich micro-indentation measurements. At the macro-scale, simulated and experimental three-point bending tests are also in good agreement, capturing the typical size-dependency of the mechanical properties of these materials. The models also predict the progressive stiffening of porous plasma-sprayed Cr2O3 due to crack closure under compressive loading, in agreement with literature reports.Refined models of hardmetal coatings, accounting for plastic behaviours and failure stresses, predict crack initiation locations as observed by indentation tests, highlighting the relevance of stress concentrations around microstructural defects (e.g. oxide inclusions).Sliding contact simulations between a hardmetal surface and a small spherical asperity reproduce the fundamental processes in tribological pairings. The experimentally observed "wavy" morphologies of actual wear surfaces are therefore explained by a mechanism of micro-scale plastic flow and matrix extrusion
Gres porcelanico: aplicaciones arquitectonicas, procesado ypropiedades fisico - mecanicas [Porcelainized stoneware: architectural, processing and physico-mechanical properties]
Porcelainized stoneware is an extremely hard and homogeneous unglazed ceramic material obtained by fast-firing of kaolinitic ceramic bodies containing a large amount of fluxes. The obtained tiles, available in a large variety of colours, shape size and surface finish, are characterized by very low porosity (<0.3wt% expressed as wafer absorption) and are ideal for heavy-traffic areas subject to mechanical and chemical stresses. Porcelainized stoneware tiles offer alternative valid (and in many cases necessary) solutions to the traditional glazed tiles either for interiors or for exteriors both in modem or classic constructions for flooring and covering.Porcelainized stoneware is an extremely hard and homogeneous unglazed ceramic material obtained by fast-firing of kaolinitic ceramic bodies containing a large amount of fluxes. The obtained tiles, available in a large variety of colours, shape size and surface finish, are characterized by very low porosity (<0.3wt% expressed as wafer absorption) and are ideal for heavy-traffic areas subject to mechanical and chemical stresses. Porcelainized stoneware tiles offer alternative valid (and in many cases necessary) solutions to the traditional glazed tiles either for interiors or for exteriors both in modem or classic constructions for flooring and covering.El gres porcelanico es un material ceramico muy duro yhomogeneo, no vidriado en su superficie, obtenido porcoccion rapida de composiciones ricas en caolinita,conteniendo una gran cantidad de fundentes. Las plaquetasde pavimentos que se obtienen son de una variedad muyextensa en aspectos, disenos y colores, caracterizandose,fundamentalmente, por su muy baja porosidad (<0,3wt%,expresado en porcentaje de capacidad de absorcion deagua). Estos material es son ideal es para trafico pesado enareas sujetas a intensas tensiones mecanicas y quimicas. Elgres porcelanico ofrece altemativas vdlidas (y, en muchoscasos, soluciones necesarias) a los pavimentos vidriadostradicionales, en interiores o para usos exteriores, amboscon decoraciones modernas o clasicas para suelos orecubrimientos de paredes
Effects of nucleating agents on diopside crystallization in new glass-ceramics for tile-glaze application
The effect of crystallization produced by addition of TiO2, ZrO2 and P2O5 oxides to glass-ceramic of the system CaO-MgO-SiO2 was studied using structural and thermal techniques. The devitrification process was independent of thermal treatment. X-ray diffraction studies performed on the glass-ceramic system indicated that diopside crystalline phase was more thermodynamically favourable than other phases. The effect of the nucleating agent depends on its nature: TiO2 decreased the activation energy while P2O5 and ZrO2 did not. SEM analysis of the doped glass-ceramics showed randomly distributed crystals with significant dimensional variations from those of the undoped system. All these formulations, showing a high crystallization rate, and a fast heating rate, can be used as tile glazes and/or tile-glaze components
Bone regeneration by novel bioactive glasses containing strontium and/or magnesium: A preliminary in-vivo study
In this work, a set of novel bioactive glasses have been tested in vivo in an animal model. The new compositions, characterized by an exceptional thermal stability and high in vitro bioactivity, contain strontium and/or magnesium, whose biological benefits are well documented in the literature. To simulate a long-term implant and to study the effect of the complete dissolution of glasses, samples were implanted in the mid-shaft of rabbits' femur and analyzed 60 days after the surgery; such samples were in undersized powder form. The statistical significance with respect to the type of bioactive glass was analyzed by Kruskal-Wallis test. The results show high levels of bone remodeling, several new bone formations containing granules of calcium phosphate (sometimes with amounts of strontium and/or magnesium), and the absence of adverse effects on bone processes due to the almost complete glass dissolution. In vivo results confirming the cell culture outcomes of a previous study highlighted that these novel bioglasses had osteostimulative effect without adverse skeletal reaction, thus indicating possible beneficial effects on bone formation processes. The presence of strontium in the glasses seems to be particularly interesting
The structure of ZrO2 phases and devetrification processes in a Ca-Zr-Si-O-based glass ceramic: a combined a-XRD and XAS study
The structure of Zr atomic environment in a CaO-ZrO2-SiO2 glass-ceramic has beenstudied combining x-ray absorption spectroscopy (XAS), X-ray diffraction (XRD) andanomalous-XRD (a-XRD) techniques as a function of thermal treatments. The analysisof XRD patterns demonstrates that the devitrification process, as a function ofthermal treatment, proceeds through the partial segregation of Zr-depleted phases(Wollastonite-like) and Zr-rich phases (Zr-oxides). The XAS and a-XRD measurementsat the Zr K edge have been exploited to get a closer insight on the atomicstructure around Zr ions. In the as quenched glass the Zr is 6-fold coordinated to Oxygenatoms in an amorphous environment rich of Ca and Si. Thermal treatment firstly(T=1000 - 1050 oC) determines the partial segregation of Zr in form of oxide whichcrystalline structure is that of tetragonal Zirconia (t-ZrO2). Raising the temperature(T=1100 oC) provokes the formation of ZrO2 crystallites in the monoclinic crystallographicphase (Baddeleyite: m-ZrO2). The analysis of XAS data demonstrates that aconsiderable amount of Zr still remains in an amorphous Calcium-Silicate phase
Prescription appropriateness of anti-diabetes drugs in elderly patients hospitalized in a clinical setting: evidence from the REPOSI Register
Diabetes is an increasing global health burden with the highest prevalence (24.0%) observed in elderly people. Older diabetic adults have a greater risk of hospitalization and several geriatric syndromes than older nondiabetic adults. For these conditions, special care is required in prescribing therapies including anti- diabetes drugs. Aim of this study was to evaluate the appropriateness and the adherence to safety recommendations in the prescriptions of glucose-lowering drugs in hospitalized elderly patients with diabetes. Data for this cross-sectional study were obtained from the REgistro POliterapie-Società Italiana Medicina Interna (REPOSI) that collected clinical information on patients aged ≥ 65 years acutely admitted to Italian internal medicine and geriatric non-intensive care units (ICU) from 2010 up to 2019. Prescription appropriateness was assessed according to the 2019 AGS Beers Criteria and anti-diabetes drug data sheets.Among 5349 patients, 1624 (30.3%) had diagnosis of type 2 diabetes. At admission, 37.7% of diabetic patients received treatment with metformin, 37.3% insulin therapy, 16.4% sulfonylureas, and 11.4% glinides. Surprisingly, only 3.1% of diabetic patients were treated with new classes of anti- diabetes drugs. According to prescription criteria, at admission 15.4% of patients treated with metformin and 2.6% with sulfonylureas received inappropriately these treatments. At discharge, the inappropriateness of metformin therapy decreased (10.2%, P < 0.0001). According to Beers criteria, the inappropriate prescriptions of sulfonylureas raised to 29% both at admission and at discharge. This study shows a poor adherence to current guidelines on diabetes management in hospitalized elderly people with a high prevalence of inappropriate use of sulfonylureas according to the Beers criteria
Antidiabetic Drug Prescription Pattern in Hospitalized Older Patients with Diabetes
Objective: To describe the prescription pattern of antidiabetic and cardiovascular drugs in a cohort of hospitalized older patients with diabetes. Methods: Patients with diabetes aged 65 years or older hospitalized in internal medicine and/or geriatric wards throughout Italy and enrolled in the REPOSI (REgistro POliterapuie SIMI—Società Italiana di Medicina Interna) registry from 2010 to 2019 and discharged alive were included. Results: Among 1703 patients with diabetes, 1433 (84.2%) were on treatment with at least one antidiabetic drug at hospital admission, mainly prescribed as monotherapy with insulin (28.3%) or metformin (19.2%). The proportion of treated patients decreased at discharge (N = 1309, 76.9%), with a significant reduction over time. Among those prescribed, the proportion of those with insulin alone increased over time (p = 0.0066), while the proportion of those prescribed sulfonylureas decreased (p < 0.0001). Among patients receiving antidiabetic therapy at discharge, 1063 (81.2%) were also prescribed cardiovascular drugs, mainly with an antihypertensive drug alone or in combination (N = 777, 73.1%). Conclusion: The management of older patients with diabetes in a hospital setting is often sub-optimal, as shown by the increasing trend in insulin at discharge, even if an overall improvement has been highlighted by the prevalent decrease in sulfonylureas prescription
- …