198,109 research outputs found
A low cost air hybrid concept
This article is a pre-print version of the full and final article which is available at the link below.Copyright © 2010 Institut français du pétrole
Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made
or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than IFP must be honored. Abstracting with credit is permitted. To copy otherwise, to republish, to post on servers, or to redistribute to lists, requires prior specific permission and/or a fee: Request permission from Documentation, Institut français du pétrole, fax. +33 1 47 52 70 78, or [email protected] air hybrid engine absorbs the vehicle kinetic energy during braking, stores it in an air tank in the form of compressed air, and reuses it to propel a vehicle during cruising and acceleration. Capturing, storing and reusing this braking energy to give additional power can therefore improve fuel economy, particularly in cities and urban areas where the traffic conditions involve many stops and starts. In order to reuse the residual kinetic energy, the vehicle operation consists of 3 basic modes, i.e. Compression Mode (CM), Expander Mode (EM) and normal firing mode. Unlike previous works, a low cost air hybrid engine has been proposed and studied. The hybrid engine operation can be realised by means of production technologies, such as VVT and valve deactivation. In this work, systematic investigation has been carried out on the performance of the hybrid engine concept through detailed gas dynamic modelling using Ricardo WAVE software. Valve timing optimization has been done for the more efficient operation of air hybrid operation and obtaining higher braking and Motoring mean effective pressure for CM and EM respectively.EPSR
Characteristics of homogeneous charge compression ignition (HCCI) combustion and emissions of n-heptane
This paper reports the outcome from a systematic investigation carried out on HCCI (Homogeneous Charge Compression Ignition) combustion of a diesel type fuel. The n heptane was chosen in this study to study the premixed diesel HCCI combustion characteristics with port fuel injection. Measurements were carried out in a single-cylinder, 4-stroke and variable compression ratio engine. Premixed n-heptane/air/EGR mixture was introduced into the cylinder by a port fuel injector and an external EGR system. The operating regions with regard to Air/Fuel ratio and EGR rate were established for different compression ratios and intake temperatures. The effects of compression ratios, intake temperatures, Air/Fuel ratios and EGR rates on knock limit, auto-ignition timing, combustion rate, IMEP, and engine-out emissions, such as NOx, CO, and unburned HC, were analysed. The results have shown HCCI combustion of n-heptane could be implemented without intake charge heating with a typical diesel engine compression ratio. The attainable HCCI operating region was mainly limited by the knock limit, misfir, and low IMEP respectively. Higher intake temperature or compression ratio could extend the misfire limit of the HCCI operation at low load but they would reduce the maximum IMEP limit at higher load conditions. Compared with conventional diesel combustion, HCCI combustion lead to extremely low NOx emissions ( less than 5 ppm) and smoke free exhaust. But HCCI diesel combustion was found to produce higher HC and CO emissions. An increase in intake temperature or compression ratio helped to reduce HC and CO emissions.
Dynamic Transitions for Quasilinear Systems and Cahn-Hilliard equation with Onsager mobility
The main objectives of this article are two-fold. First, we study the effect
of the nonlinear Onsager mobility on the phase transition and on the
well-posedness of the Cahn-Hilliard equation modeling a binary system. It is
shown in particular that the dynamic transition is essentially independent of
the nonlinearity of the Onsager mobility. However, the nonlinearity of the
mobility does cause substantial technical difficulty for the well-posedness and
for carrying out the dynamic transition analysis. For this reason, as a second
objective, we introduce a systematic approach to deal with phase transition
problems modeled by quasilinear partial differential equation, following the
ideas of the dynamic transition theory developed recently by Ma and Wang
Shifting with
Precision measurements at the resonance agree well with the standard
model. However, there is still a hint of a discrepancy, not so much in by
itself (which has received a great deal of attention in the past several years)
but in the forward-backward asymmetry together with . The two
are of course correlated. We explore the possibilty that these and other
effects are due to the mixing of and with one or more heavy quarks.Comment: 11 pages, 1 Figure, LaTex fil
Numerical framework for transcritical real-fluid reacting flow simulations using the flamelet progress variable approach
An extension to the classical FPV model is developed for transcritical
real-fluid combustion simulations in the context of finite volume, fully
compressible, explicit solvers. A double-flux model is developed for
transcritical flows to eliminate the spurious pressure oscillations. A hybrid
scheme with entropy-stable flux correction is formulated to robustly represent
large density ratios. The thermodynamics for ideal-gas values is modeled by a
linearized specific heat ratio model. Parameters needed for the cubic EoS are
pre-tabulated for the evaluation of departure functions and a quadratic
expression is used to recover the attraction parameter. The novelty of the
proposed approach lies in the ability to account for pressure and temperature
variations from the baseline table. Cryogenic LOX/GH2 mixing and reacting cases
are performed to demonstrate the capability of the proposed approach in
multidimensional simulations. The proposed combustion model and numerical
schemes are directly applicable for LES simulations of real applications under
transcritical conditions.Comment: 55th AIAA Aerospace Sciences Meeting, Dallas, T
Information processing with topologically protected vortex memories in exciton-polariton condensates
We show that in a non-equilibrium system of an exciton-polariton condensate,
where polaritons are generated from incoherent pumping, a ring-shaped pump
allows for stationary vortex memory elements of topological charge or
. Using simple potential guides we can choose whether to copy the same
charge or invert it onto another spatially separate ring pump. Such
manipulation of binary information opens the possibility of a new type
processing using vortices as topologically protected memory components
The progress on the study of land surface heat fluxes over heterogeneous landscape of the Tibetan Plateau
- âŠ