Design of Robust and Power Efficient Full Adder Using Energy Efficient Feed through Logic

ABSTRACT – An Energy Efficient Feedthrough Logic (EE-FTL) is proposed in this paper to reduce the power consumption for low power applications. The EE-FTL is well suited to arithmetic circuits where the critical path is made of a large cascade of inverting gates. It has a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. The proposed logic style requires low power when compare to the existing feedthrough logic (FTL). The proposed circuit is simulated and a comparison analysis has been carried out using 90-nm, 1.2V CMOS process technology. A CMOS Full Adder is designed by the energy efficient feedthrough logic and the simulation result in MicroWind environment shows that the proposed logic reduces the power consumption by 77%, 70 % and 36 % over FTL, Low Power FTL (LP-FTL) and Constant Delay Logic (CDL), respectively. The problem of requirement of inverter as in dynamic logic is completely eliminated in the proposed logic

Finite Element Analysis and Experimental Evaluation of Residual Stress of Zr-4 alloys Processed through Swaging

Zirconium alloy has been extensively used as a cladding material in nuclear power reactors due to its low neutron absorption cross section, excellent mechanical properties, and corrosion resistance. The influence of the swaging parameter, feed rate (0.7, 1.25, 2 m/min) on residual stress induced in Zr-4 alloy is investigated in the present work. A three-dimensional finite element model was implemented in the Deform 3D software to simulate the rotary swaging (RS) process over a circular rod of Zr-4 alloy. The simulation results based on the 3D framework provide a detailed insight of residual stress, true stress versus true strain and force applied over the rod during the multiple pass swaging process; the results are compared with experimental results. The experimental hole drilling method is used to determine the residual stresses on swaged zirconium alloy at different feed rates (0.7, 1.25, and 2 m/min). A similar trend of residual stress between experimental and numerical results from the surface to the center on the swaged rod samples is observed. The same magnitude of residual stress at the surface of the swaged Zr-4 rod is also observed. It is found to be compressive at the surface and tensile in the center of the samples, as observed in the present work

Repeated gain and loss of a single gene modulates the evolution of vascular plant pathogen lifestyles

Vascular plant pathogens travel long distances through host veins, leading to life-threatening, systemic infections. In contrast, nonvascular pathogens remain restricted to infection sites, triggering localized symptom development. The contrasting features of vascular and nonvascular diseases suggest distinct etiologies, but the basis for each remains unclear. Here, we show that the hydrolase CbsA acts as a phenotypic switch between vascular and nonvascular plant pathogenesis. cbsA was enriched in genomes of vascular phytopathogenic bacteria in the family Xanthomonadaceae and absent in most nonvascular species. CbsA expression allowed nonvascular Xanthomonas to cause vascular blight, while cbsA mutagenesis resulted in reduction of vascular or enhanced nonvascular symptom development. Phylogenetic hypothesis testing further revealed that cbsA was lost in multiple nonvascular lineages and more recently gained by some vascular subgroups, suggesting that vascular pathogenesis is ancestral. Our results overall demonstrate how the gain and loss of single loci can facilitate the evolution of complex ecological traits