Au/TiO2(110) interfacial reconstruction stability from ab initio

We determine the stability and properties of interfaces of low-index Au surfaces adhered to TiO2(110), using density functional theory energy density calculations. We consider Au(100) and Au(111) epitaxies on rutile TiO2(110) surface, as observed in experiments. For each epitaxy, we consider several different interfaces: Au(111)//TiO2(110) and Au(100)//TiO2(110), with and without bridging oxygen, Au(111) on 1x2 added-row TiO2(110) reconstruction, and Au(111) on a proposed 1x2 TiO reconstruction. The density functional theory energy density method computes the energy changes on each of the atoms while forming the interface, and evaluates the work of adhesion to determine the equilibrium interfacial structure.Comment: 20 pages, 11 figure

Aromaticity in a Surface Deposited Cluster: Pd4_4 on TiO2_2 (110)

We report the presence of \sigma-aromaticity in a surface deposited cluster, Pd$_4$ on TiO$_2$ (110). In the gas phase, Pd$_4$ adopts a tetrahedral structure. However, surface binding promotes a flat, \sigma-aromatic cluster. This is the first time aromaticity is found in surface deposited clusters. Systems of this type emerge as a promising class of catalyst, and so realization of aromaticity in them may help to rationalize their reactivity and catalytic properties, as a function of cluster size and composition.Comment: 4 pages, 3 figure

Stability of gold nanowires at large Au-Au separations

The unusual structural stability of gold nanowires at large separations of gold atoms is explained from first-principles quantum mechanical calculations. We show that undetected light atoms, in particular hydrogen, stabilize the experimentally observed structures, which would be unstable in pure gold wires. The enhanced cohesion is due to the partial charge transfer from gold to the light atoms. This finding should resolve a long-standing controversy between theoretical predictions and experimental observations.Comment: 7 pages, 3 figure

Silver nanoparticle coatings with adjustable extinction spectra produced with liquid flame spray, and their role in photocatalytic enhancement of TiO2

Silver nanoparticles deposits were produced with liquid flame spray (LFS) on glass and TiO2 substrates to study their optical response and photocatalytic enhancement. The correlation between extinction spectrum of the nanoparticle coating and the LFS process parameters was studied. The spectra consisted of two partly overlapping peaks: one centered in the UV region and the other in the visible light region. The visible light peak redshifted as either the silver mass concentration in the precursor solution or the precursor solution feed rate was increased, which also correlated with growing primary particle size. However, simultaneous correlation with photocatalytic activity of the decorated TiO2 surfaces was not observed, which was attributed to particle sintering on the surface. Instead, the photocatalytic activity was seen to change as the surface coverage of silver nanoparticles was varied. When the surface coverage was raised from ∼10 % to roughly 30 %, the activity, and then decreased as the loading was further raised. The increase was assumed to originate from plasmonic activation, and the decrease was attributed to the excessive amount of silver either blocking reactive area of the TiO2 or absorbing/scattering too much of the incoming light, which hindered the photocatalytic activity.Peer reviewe

Aluminium oxide formation via atomic layer deposition using a polymer brush mediated selective infiltration approach

Area selective deposition (ASD) is an emerging method for the patterning of electronic devices as it can significantly reduce processing steps in the industry. A potential ASD methodology uses infiltration of metal precursors into patterned polymer materials. The work presented within demonstrates this potential by examining hydroxy terminated poly(2-vinylpyridine) (P2VP-OH) as the ‘receiving’ polymer and trimethylaluminium (TMA) and H2O as the material precursors in a conventional atomic layer deposition (ALD) process. Fundamental understanding of the surface process was achieved using X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX) mapping via transmission electron microscopy (TEM). The resulting analysis confirms aluminium inclusion within the polymer film. Spectroscopic and microscopic characterisation show metal infiltration throughout the polymer to the underlying silicon dioxide interface. Exposing the infiltrated film to an oxygen plasma results in the removal of the organic component and resultant fabrication of a sub 5 nm aluminium oxide layer.acceptedVersionPeer reviewe

Is carrier mobility a limiting factor for charge transfer in TiO2/Si devices? A study by transient reflectance spectroscopy

TiO2 coatings are often deposited over silicon-based devices for surface passivation and corrosion protection. However, the charge transfer (CT) across the TiO2/Si interface is critical as it may instigate potential losses and recombination of charge carriers in optoelectronic devices. Therefore, to investigate the CT across the TiO2/Si interface, transient reflectance (TR) spectroscopy was employed as a contact-free method to evaluate the impact of interfacial SiOx, heat-treatments, and other phenomena on the CT. Thin-film interference model was adapted to separate signals for Si and TiO2 and to estimate the number of transferred carriers. Charge transfer velocity was found to be 5.2 × 104 cm s−1 for TiO2 heat-treated at 300 °C, and even faster for amorphous TiO2 if the interfacial SiOx layer was removed using HF before TiO2 deposition. However, the interface is easily oversaturated because of slow carrier diffusion in TiO2 away from the TiO2/Si interface. This inhibits CT, which could become an issue for heavily concentrated solar devices. Also, increasing the heat-treatment temperature from 300 °C to 550 °C has only little impact on the CT time but leads to reduced carrier lifetime of ¡3 ns in TiO2 due to back recombination via the interfacial SiOx, which is detrimental to TiO2/Si device performance.publishedVersionPeer reviewe

Effect of dielectric barrier on rectification, injection and transport properties of printed organic diodes

International audienceRectification ratios of 10 5 were observed in printed organic copper/polytriarylamine (PTAA)/silver diodes with a thin insulating barrier layer at the copper/PTAA interface. To clarify the origin of the high rectification ratio in the diodes, the injection, transport and structure of the diodes with two different copper cathodes were examined using impedance spectroscopy and X-ray photoelectron spectroscopy (XPS). The impedance data confirm that the difference in diode performance arises from the copper/PTAA interface. The XPS measurements show that the copper surface in both diode structures is covered by a layer of Cu 2 O topped by an organic layer. The organic layer is thicker on one of the surfaces, which results in lower reverse currents and higher rectification ratios in the printed diodes. We suggest a model where a dipole at the dual insulating layer induces a shift in the semiconductor energy levels explaining the difference between the diodes with different cathodes

CO-induced lifting of Au (001) surface reconstruction

We report CO-induced lifting of the hexagonal surface reconstruction on Au (001). Using in-situ surface x-ray scattering, we determined a pressure-temperature phase diagram for the reconstruction and measured the dynamical evolution of the surface structure in real time. Our observations provide evidence that, under certain conditions, even macroscopic Au surfaces, much larger than catalytic Au nanoparticles [M. Haruta, Catal. Today 36, 153 (1997)], can exhibit some of the reactive properties and surface transitions observed in systems known to be catalytically active such as Pt (001).Comment: 4 Figures. Accepted as a Letter to Journal of Physical Chemistry

Controlling Activity and Selectivity Using Water in the Au-Catalysed Preferential Oxidation of CO in H\u3csub\u3e2\u3c/sub\u3e

Industrial hydrogen production through methane steam reforming exceeds 50 million tons annually and accounts for 2–5% of global energy consumption. The hydrogen product, even after processing by the water–gas shift, still typically contains ∼1% CO, which must be removed for many applications. Methanation (CO + 3H2 → CH4 + H2O) is an effective solution to this problem, but consumes 5–15% of the generated hydrogen. The preferential oxidation (PROX) of CO with O2 in hydrogen represents a more-efficient solution. Supported gold nanoparticles, with their high CO-oxidation activity and notoriously low hydrogenation activity, have long been examined as PROX catalysts, but have shown disappointingly low activity and selectivity. Here we show that, under the proper conditions, a commercial Au/Al2O3 catalyst can remove CO to below 10 ppm and still maintain an O2-to-CO2 selectivity of 80–90%. The key to maximizing the catalyst activity and selectivity is to carefully control the feed-flow rate and maintain one to two monolayers of water (a key CO-oxidation co-catalyst) on the catalyst surface