77 research outputs found
The effect of austenitizing conditions in the ductile iron hardening process on longitudinal ultrasonic wave velocity
The paper presents results of a research on the effect of austenitizing temperature and time adopted in the hardening operation on the ultrasonic wave velocity in ductile iron. It has been found that with increasing austenitizing temperature and with the passage of the austenitizing time, a monotonic decrease of the ultrasonic longitudinal wave velocity value occurred. Implementation of ultrasonic testing of results obtained in the course of the cast iron hardening process both in production and as-cast conditions, requires development of a test methodology that must take into account the influence of base material structure (degree of nodularization, graphite precipitation count) on the ultrasound wave velocity
Combustion Engine Cylinder Liners Made of Al-Si Alloys
Abstract The paper deals with problems related to application of aluminum-silicon alloys for combustion engine cylinder liners
Abrasive wear resistance of a quenched and sub-zero treated high-chromium white cast iron
The study reported in this paper concerned development of such microstructure of high-chromium (24 % Cr) cast iron which could secure high abrasive wear resistance of die inserts used to fabricate stampings from refractory materials. It was found that by increasing the cast iron cooling rate as a result of thermal interaction with the chill, it is possible to obtain fine carbide precipitates with diversified morphology, rich in Cr and Fe, containing Mo and Si. The matrix in the regions of thermal interaction with the chill was enriched in Cr and Mo, but depleted of Fe and Si. The sub-zero treatment process was developed to secure presence of hardening products in the matrix. The obtained structure of high-chromium cast iron has made the inserts more resistant to abrasive wear compared to tool steels after hear treatment used earlier
Application of ceramic coating to improve abrasive wear resistance of die inserts used to press-mould stampings of refractories
The paper presents results of a study on abrasive wear resistance of die inserts for composite moulds used to pressmould stampings from refractory materials, determined based on susceptibility to scratching with a diamond indenter. For the study, two inserts of high-chromium cast iron were prepared, of which one was provided with a ceramic coating (60 % Al2O3 + 40 % TiO2) with a metallic interlayer (NiAlCrSi). Both layers were deposited by means of the Atmospheric Plasma Spraying (APS) method. The obtained scratch test results indicate that with the use of the same load force (20 N), die inserts with ceramic coating are characterized with less indenter penetration depth which should translate to higher resistance to abrasive wear
- …