4,032 research outputs found
Optimum vibrating beams with stress and deflection constraints
The fundamental frequency of vibration of an Euler-Bernoulli or a Timoshenko beam of a specified constant volume is maximized subject to the constraint that under a prescribed loading the maximum stress or maximum deflection at any point along the beam axis will not exceed a specified value. In contrast with the inequality constraint which controls the minimum cross-section, the present inequality constraints lead to more meaningful designs. The inequality constraint on stresses is as easily implemented as the minimum cross-section constraint but the inequality constraint on deflection uses a treatment which is an extension of the matrix partitioning technique of prescribing displacements in finite element analysis
Exploring hidden dimensions of soil fungal biodiversity: A simple technique to detect soil fungi resistant to antifungal compounds
Soils are known to be ultimate and complex reservoirs of microbial diversity. The complex dimensions of bacterial and fungal diversity in tropical soils and microbial community dynamics are underexplored. Isolation techniques aimed at Actinomycetes generally employ highly selective media, powerful antibiotics and antifungal compounds to suppress undesirable bacteria and fungi. However some soil fungi may show their resistance towards these antifungal compounds. During our work to explore soil actinomycetes diversity, slides coated with Arginine Vitamin agar (AVA) incorporating a cocktail of antibiotics and antifungal compounds such as Nystatin, Cycloheximide, Terbinafin, Griseofulvin, and Fluconazole were exposed to soil environment and were retrieved at intervals of 4, 7, 15 and 28 days for detail microscopic studies of surface colonies. Along with actinomycetes the presence of unidentified aseptate and septate fungi was revealed indicating their resistance to combination and concentration of antifungals. Heat treatment of the soil was found to cause considerable decrease in fungal contamination probably due to elimination of heat labile fungi. Our results have led us to develop a simple procedure to sample the interesting and industrially useful strains of soil fungi resistant to common antifungal compounds. Some fungal strains are reported resistant to certain antifungals with resulting therapeutic failures as use of these antifungals inevitably selects resistant fungi, thereby pressing the urge for continuing and cyclical need of new antifungals (Augustin et al., 2004). This technique could prove useful to detect novel antifungal resistant strains with potential to emerge as novel human pathogens. It has not escaped our notice that the probability of such finding could also help to verify whether these fungi could utilize such antifungal compounds through use of hitherto undiscovered metabolic pathways and novel enzymes leading to identification of genes responsible for antifungal resistance
Digital Image Analysis of Actinomycetes Colonies as a Potential Aid for Rapid Taxonomic Identification
High frequency isolation of actinomycetes poses a challenge for the taxonomists hence simple and rapid identification methods are required. Our work to catalogue biodiversity of actinomycetes of Goa yielded several distinct morphotypes. After their tentative identification, the feasibility to distinguish these using digital image analyses (DIA) was explored. Digital images of wild colony morphotypes were processed using public domain SCION image analysis software. DIA revealed some intricate digital characters. A combination of these with standard morphological and microscopic characters could be potentially useful for preparing a digital identification key of the actinomycetes strains with potential application in rapid taxonomic identification
Some inconsistencies of the finite element method as applied to inelastic response
The inadequacy of a two noded beam-column element with a linear axial and a cubic transverse displacement field for inelastic analysis is demonstrated. For complete equilibrium satisfaction in the linear elastic range a three noded beam-column element is shown to be consistent. Next, the sensitivity of the inelastic response to numerical solutions of the inelastic response of a cantilever beam resulting from approximate integration of strain energy are brought out and finally, consequences of this on the nonlinear transient response of structures are considered
Nonlinear transient analysis via energy minimization
The formulation basis for nonlinear transient analysis of finite element models of structures using energy minimization is provided. Geometric and material nonlinearities are included. The development is restricted to simple one and two dimensional finite elements which are regarded as being the basic elements for modeling full aircraft-like structures under crash conditions. The results indicate the effectiveness of the technique as a viable tool for this purpose
Efficiency of unconstrained minimization techniques in nonlinear analysis
Unconstrained minimization algorithms have been critically evaluated for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth, first, or second order depending upon the highest derivative of the function required by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives clearly suggests using analytically derived gradients instead of finite difference approximations. The use of analytic gradients results in better control of the number of minimizations required for convergence to the exact solution
Three dimensional inelastic finite element analysis of laminated composites
Formulations of the inelastic response of laminated composites to thermal and mechanical loading are used as the basis for development of the computer NALCOM (Nonlinear Analysis of Laminated Composites) computer program which uses a fully three dimensional isoparametric finite element with 24 nodes and 72 degrees of freedom. An incremental solution is performed with nonlinearities introduced as pseudoloads computed for initial strains. Equilibrium iteration may be performed at every step. Elastic and elastic-plastic response of boron/epoxy and graphite/epoxy graphite/epoxy and problems of curing 0/90 sub s Gr/Ep laminates with and without circular holes are analyzed. Mechanical loading of + or - 45sub s Gr/Ep laminates is modeled and symmetry conditions which exist in angle-ply laminates are discussed. Results are compared to experiments and other analytical models when possible. All models are seen to agree reasonably well with experimetnal results for off-axis tensile coupons. The laminate analyses show the three dimensional effects which are present near holes and free corners
Stock assessment and biology of Johnius glaucus (Day) off the northwest coast of India
The stock size and biology of Johnius glaucus (Day) resource off the northwest coast of India were studied for 1982-83 and 1983-84. The total length at the end of 6, 12, 18, 24 and 26 months was 121 mm, 183 mm, 237 mm, 261 mm and 264 mm respectively. The length growth parameters were: L∞=300 mm, K=0.0807 (monthly) and t(sub)0=-0.51 month. The weight growth parameters were: W∞= 317g, K=0.0762 (monthly) and t(sub)0= -0.41 month. The exploited stock mainly composed of 1/2 + and 1+ age groups. The annual Z, M and F were 2.34, 1.49 and 0.85 respectively. The l(sub)b, t(sub)b, l(sub)r, t(sub)r and selection factor K were 155 mm, 0.75 year, 65 mm, 0.25 year and 3.875 respectively. The Yw/R was optimum at the exploitation rate (E) of 0.75 and coded mesh size of 37 mm. The total stock for 1982-83 and 1983-84 was 14,624 and 26,190 tons respectively. The standing stock of 1982-83 and 1983-84 was 5,645 and 10,110 tons respectively. The MSY for 1982-83 and 1983-84 was 6,623 and 11,788 tons respectively. The F and Z were lowest in 0+ age group and highest in 1+ age group
Nonlinear transient analysis by energy minimization: A theoretical basis for the ACTION computer code
The formulation basis for establishing the static or dynamic equilibrium configurations of finite element models of structures which may behave in the nonlinear range are provided. With both geometric and time independent material nonlinearities included, the development is restricted to simple one and two dimensional finite elements which are regarded as being the basic elements for modeling full aircraft-like structures under crash conditions. Representations of a rigid link and an impenetrable contact plane are added to the deformation model so that any number of nodes of the finite element model may be connected by a rigid link or may contact the plane. Equilibrium configurations are derived as the stationary conditions of a potential function of the generalized nodal variables of the model. Minimization of the nonlinear potential function is achieved by using the best current variable metric update formula for use in unconstrained minimization. Powell's conjugate gradient algorithm, which offers very low storage requirements at some slight increase in the total number of calculations, is the other alternative algorithm to be used for extremely large scale problems
Study of improved modeling and solution procedures for nonlinear analysis
An evaluation of the ACTION computer code on an aircraft like structure is presented. This computer program proved adequate in predicting gross response parameters in structures which undergo severe localized cross sectional deformations
- …