Perspective: Covid-19; emerging strategies and material technologies

It will be remembered in history as the event that brought the world together with science and technology; the COVID-19 pandemic has allowed for decades worth of progression in both healthcare policies and technology development. It has been a show of unprecedented global health policies ranging from the legal requirement for public facemask use to the use of tough movement restrictions that has bought the world's economy to its knees. Here, we observe the impact of national lockdowns, facemask usage, and their effect on infection rates. It is clear that healthcare policies alone cannot tackle a pandemic. There is a huge pressure to develop personal protective equipment that not only has the capacity to prevent transmission but also has the ergonomics to be worn for long durations. In this work, we reveal our views and thoughts on the healthcare policies and developing materials and technology strategies that have contributed to reduce the damage of the pandemic, coming from the perspectives of materials scientists and a UK National Health Service consultant doctor

Physio-chemical and antibacterial characteristics of pressure spun nylon nanofibres embedded with functional silver nanoparticles

© 2015 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). Date of Acceptance: 05/06/2015A novel and facile approach to prepare hybrid nanoparticle embedded polymer nanofibers using pressurised gyration is presented. Silver nanoparticles and nylon polymer were used in this work. The polymer solution's physical properties, rotating speed and the working pressure had a significant influence on the fibre diameter and the morphology. Fibres in the range of 60–500 nm were spun using 10 wt.%, 15 wt.% and 20 wt.% nylon solutions and these bead-free fibres were processed under 0.2 MPa and 0.3 MPa working pressure and a rotational speed of 36,000 rpm. 1–4 wt.% of Ag was added to these nylon solutions and in the case of wt.% fibres in the range 50–150 nm were prepared using the same conditions of pressurised gyration. Successful incorporation of the Ag nanoparticles in nylon nanofibres was confirmed by using a combination of advanced microscopical techniques and Raman spectrometry was used to study the bonding characteristics of nylon and the Ag nanoparticles. Inductively coupled plasma mass spectroscopy showed a substantial concentration of Ag ions in the nylon fibre matrix which is essential for producing effective antibacterial properties. Antibacterial activity of the Ag-loaded nanofibres shows higher efficacy than nylon nanofibres for Gram-negative Escherichia coli and Pseudomonas aeruginosa microorganisms, and both Ag nanoparticles and the Ag ions were found to be the reason for enhanced cell death in the bacterial solutionPeer reviewe

Recent developments in the use of centrifugal spinning and pressurized gyration for biomedical applications

Centrifugal spinning is a technology used to generate small diameter fibers and has been extensively studied for its vast applications in biomedical engineering. Centrifugal spinning is known for its rapid production rate and has inspired the creation of other technologies which leverage the high-speed rotation, namely Pressurized Gyration. Pressurized gyration incorporates a unique applied gas pressure which serves to provide additional control over the fiber production process. The resulting fibers are uniquely suitable for a range of healthcare-related applications that are thoroughly discussed in this work, which involve scaffolds for tissue engineering, solid dispersions for drug delivery, antimicrobial meshes for filtration and bandage-like fibrous coverings for wound healing. In this review, the notable recent developments in centrifugal spinning and pressurized gyration are presented and how these technologies are being used to further the range of uses of biomaterials engineering, for example the development of core-sheath fabrication techniques for multi-layered fibers and the combination with electrospinning to produce advanced fiber mats. The enormous potential of these technologies and their future advancements highlights how important they are in the biomedical discipline

Bioinspired electrohydrodynamic ceramic patterning of curved metallic substrates

Template-assisted electrohydrodynamic atomisation (TAEA) has been used for the first time to pattern curved metallic surfaces. Parallel lines of ceramic titania (TiO2) were produced on titanium substrates, convex and concave with diameters of ~25 mm, at the ambient temperature. Optimal results were obtained with 4 wt% TiO2 in ethanol suspension deposited over 300 s during stable cone-jetting at 20 µl/min, 10kV and collection distance 80 mm. A high degree of control over pattern line width, interline spacing and thickness were achieved. Nanoindentation load-displacement curves were continuous for the full loading and unloading cycle, indicating good adhesion between pattern and substrate. At a loading rate of 1 μN/s and a hold time of 1 s, pattern hardness decreased as load increased up to 7 μN and remained at 0·1 GPa up to higher loads. Elastic modulus behaved similarly, and both were not sensitive to loading rate. The effect of heat treatment to further consolidate the patterned deposits was also investigated. Hardness of the patterns was not markedly affected by heating. This work shows that TAEA is highly controllable and compatible on a range of substrate geometries. Extending TAEA capabilities from flat to curved surfaces, enabling the bioactive patterning of different surface geometries, takes this technology closer to orthopaedic engineering applications

COVID‐19: Facemasks, healthcare policies and risk factors in the crucial initial months of a global pandemic

Previous pandemics have shown that facemask use becomes highly popular in public settings due to fear of the disease spreading. There is, however, a lack of strong scientific evidence that facemasks can significantly reduce the spread of respiratory diseases and as such, most governing policies do not mandate these coverings. There is a stark contrast between the policies and acceptance of facemasks across different geographies. In this work, several data sources have been thoroughly analysed to elucidate how viral diseases are transmitted and spread with particular emphasis on the novel SARS‐CoV‐2 virus which is causing an outbreak of COVID‐19. The different types of facemasks and respirators are also explained, the nature of their design and their efficacy is also examined. Several key factors which have been hypothesised to contribute to the spread of viral infections are elaborated in detail including the effect of temperature and humidity, public transportation systems, population density, socio‐economics and sociology. In this work, data are analysed to explain how the disease is spread, how facemasks function and the differences in the number of initial cases based on several contributing factors to the spread of disease. There are also some dangers in automatically recommending community facemask wearing, such as a reduction in the immune system functionality from the reduced exposure to microbes and the disposal issues which result from the large‐scale use of such materials. The questions of whether facemasks are useful in a community setting or if they divert valuable material away from critical healthcare providers are discussed

Pressurized Gyration: Fundamentals, Advancements, and Future

As a facile, efficient, and low-cost fiber manufacturing strategy, pressurized gyration/rotation (PG) is attracting tremendous attention. This review provides a comprehensive introduction to the working setups, fundamental principles, processing parameters, and material feed properties of this technology. The characterizations of products prepared by this technology and their wide application fields are summarized. The development potentials and broader application prospects of PG are discussed. PG holds significant promise for the scale-up of ultrafine fiber manufacturing

Black Beans, Fiber, and Antioxidant Capacity Pilot Study: Examination of Whole Foods vs. Functional Components on Postprandial Metabolic, Oxidative Stress, and Inflammation in Adults with Metabolic Syndrome.

Beans (Phaseolus vulgaris) contain bioactive components with functional properties that may modify cardiovascular risk. The aims of this pilot study were to evaluate the ability of black beans to attenuate postprandial metabolic, oxidative stress, and inflammatory responses and determine relative contribution of dietary fiber and antioxidant capacity of beans to the overall effect. In this randomized, controlled, crossover trial, 12 adults with metabolic syndrome (MetS) consumed one of three meals (black bean (BB), fiber matched (FM), and antioxidant capacity matched (AM)) on three occasions that included blood collection before (fasting) and five hours postprandially. Insulin was lower after the BB meal, compared to the FM or AM meals (p < 0.0001). A significant meal × time interaction was observed for plasma antioxidant capacity (p = 0.002) revealing differences over time: AM > BB > FM. Oxidized LDL (oxLDL) was not different by meal, although a trend for declining oxLDL was observed after the BB and AM meals at five hours compared to the FM meal. Triglycerides and interleukin-6 (IL-6) increased in response to meals (p < 0.0001). Inclusion of black beans with a typical Western-style meal attenuates postprandial insulin and moderately enhances postprandial antioxidant endpoints in adults with MetS, which could only be partly explained by fiber content and properties of antioxidant capacity

Porous Graphene Composite Polymer Fibres

Since the isolation of graphene, there have been boundless pursuits to exploit the many superior properties that this material possesses; nearing the two-decade mark, progress has been made, but more is yet to be done for it to be truly exploited at a commercial scale. Porous graphene (PG) has recently been explored as a promising membrane material for polymer composite fibres. However, controlling the incorporation of high surface area PG into polymer fibres remain largely unexplored. Additionally, most polymer-graphene composites suffer from low production rates and yields. In this paper, graphene-loaded microfibres, which can be produced at a very high rate and yield have been formed with a carrier polymer, polycaprolactone. For the first time, PG has been incorporated into polymer matrices produced by a high-output manufacturing process and analysed via multiple techniques; scanning electron microscopy (SEM), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Raman spectra showed that single layer graphene structures were achieved, evidence for which was also backed up by the other techniques. Fibres with an average diameter ranging from 3–8 µm were produced with 3–5 wt% PG. Here, we show how PG can be easily processed into polymeric fibres, allowing for widespread use in electrical and ultrafiltration system

The effect of solvent and pressure on polycaprolactone solutions for particle and fibre formation

Polycaprolactone (PCL) is a widely used material in many applications to tackle health problems worldwide. Formed micro- or nanosized PCL particles and fibres benefit from a higher surface area to volume ratio and are valuable in those applications, thus there is always a push to achieve smaller diameters. Electrohydrodynamic (EHD) technologies have been at the forefront in the production of polymeric biomaterials, and pressurised gyration (PG) has also enhanced possibilities by its ability to spin comparable fibres at rapid speeds. In this work, PCL microparticles and fibres were separately produced by changing key operating parameters of EHD and PG systems and PCL solution properties. Initially, PCL microparticles were formed by electrospraying with different binary solvent systems, followed by pressurised gyration fibre production with various singular solvents and a pre-optimised binary solvent system. As anticipated, the use of binary systems altered particle morphologies and diameters, while increased pressure and the use of different solvents greatly affected the characteristics of resulting fibres. The morphology of PCL was found to be highly dependent on the solvents and operating parameters of the technology used

Next‐generation Antimicrobial Peptides (AMPs) incorporated nanofibre wound dressings

Antimicrobial peptides (AMPs) containing polymer-based nanodelivery systems offer to overcome many challenges in wound care. While preventing the contact of the external agents on the wound, it also addresses a rising concern on the drug resistance. AMPs as the host defence peptides have been increasingly recognized for therapeutic potential owning to their critical role in innate immunity. Here we investigated a nanofibre mesh approach using AMPs incorporated polyethylene oxide (PEO) for wound healing applications. PEO was prepared to carry GH12-COOH-M2 (type 1 AMP) and AMP2 (type 2 AMP), and their antibacterial activity was assessed against Staphylococcus epidermidis (S. epidermidis). PEO-AMP nanofibre meshes were successfully formed by using pressurized gyration (PG), which allows rapid mass production. Bacterial viability of the nanofibre meshes was investigated using the AlamarBlue assay. Fibre morphology, size distribution and AMP incorporation in the nanofibres were characterized by scanning electron microscopy (SEM), fluorescence microscopy (polarization contrast images) and Fourier transform infrared spectroscopy (FTIR). While both PEO-AMP1 and PEO-AMP2 nanofibres indicate promising bacterial inhibition at 105 µg/ml, PEO-AMP2 fibres showed the highest S. epidermidis reduction. The results demonstrated that increase in the AMP content reduced the bacterial growth. Another important implementation of the PEO-AMP nanofibres is that they can be tuned to rapidly releasing the peptides. Antimicrobial peptide-loaded nanofibres represent a viable biologically active solution to next-generation wound dressings