7,404 research outputs found
Recommended from our members
Rapid Steel Tooling Via Solid Freeform Fabrication
With increasing part complexity and requirements for long production runs, tooling has
become an expensive process that requires long lead times to manufacture. This lengthens the
amount oftime from "art to part". Rapid tooling via stereolithography (SLA), filled epoxies, etc.
have been stopgap measures to produce limited prototyping runs from (10 to 500 parts). This
gives poor dimensional analysis and does not allow for limited production runs of 1000+ parts.
The method ofproducing prototype tooling with a powdered metal process has been developed
that produces tooling with a hardness greater than 35 HRC and total shrinkage less than 0.5%.
This tooling process manufactures production ready tooling that will perform extended cycle
runs (100,000+). Manufacturing ofthis tooling takes 1 to 2 weeks and will compare favorably
with production grade steel tooling. Originals drawn in 3D CAD can be used to prototype the
master that will allow for the production ofthe rapid metal tool set.
process starts with a rapid prototyped model made by whatever process is desired or
a machined master. For this paper a Sander's Model Maker II® rapid prototyping machine was
used to fabricate the model. After the model ofthe tool set is made, a silicone rubber negative is
cast around that model. After the silicone rubber model is made, a heated slurry ofmetal
powders and polymers is poured into the mold to create the green tool set. The tool set is left to
cool, and then removed from the silicone rubber mold. The tool set is then debound and sintered
to produce a final tool set with properties approaching hardened tool steel.Mechanical Engineerin
Digestion of Protein in Premature and Term Infants.
Premature birth rates and premature infant morbidity remain discouragingly high. Improving nourishment for these infants is the key for accelerating their development and decreasing disease risk. Dietary protein is essential for growth and development of infants. Studies on protein nourishment for premature infants have focused on protein requirements for catch-up growth, nitrogen balance, and digestive protease concentrations and activities. However, little is known about the processes and products of protein digestion in the premature infant. This review briefly summarizes the protein requirements of term and preterm infants, and the protein content of milk from women delivering preterm and at term. An in-depth review is presented of the current knowledge of term and preterm infant dietary protein digestion, including human milk protease and anti-protease concentrations; neonatal intestinal pH, and enzyme activities and concentrations; and protein fermentation by intestinal bacteria. The advantages and disadvantages of incomplete protein digestion as well as factors that increase resistance to proteolysis of particular proteins are discussed. In order to better understand protein digestion in preterm and term infants, future studies should examine protein and peptide fragment products of digestion in saliva, gastric, intestinal and fecal samples, as well as the effects of the gut micro biome on protein degradation. The confluence of new mass spectrometry technology and new bioinformatics programs will now allow thorough identification of the array of peptides produced in the infant as they are digested
Torsion and Nonmetricity in Scalar-Tensor Theories of Gravity
We show that the gravitational field equations derived from an action
composed of i) an arbitrary function of the scalar curvature and other scalar
fields plus ii) connection-independent kinetic and source terms, are identical
whether one chooses nonmetricity to vanish and have non-zero torsion or vice
versa.Comment: 10 page
High Temperature Partition Function of the Rigid String
We find that the high temperature limit of the free energy per unit length
for the rigid string agrees dimensionally with that of the QCD string (unlike
the Nambu-Goto string). The sign, and in fact the phase, do not agree. While
this may be a clue to a string theory of QCD, we note that the problem of the
fourth derivative action makes it impossible for the rigid string to be a
correct description.Comment: 7 page
Extension of PRISM by Synthesis of Optimal Timeouts in Fixed-Delay CTMC
We present a practically appealing extension of the probabilistic model
checker PRISM rendering it to handle fixed-delay continuous-time Markov chains
(fdCTMCs) with rewards, the equivalent formalism to the deterministic and
stochastic Petri nets (DSPNs). fdCTMCs allow transitions with fixed-delays (or
timeouts) on top of the traditional transitions with exponential rates. Our
extension supports an evaluation of expected reward until reaching a given set
of target states. The main contribution is that, considering the fixed-delays
as parameters, we implemented a synthesis algorithm that computes the
epsilon-optimal values of the fixed-delays minimizing the expected reward. We
provide a performance evaluation of the synthesis on practical examples
Radio-frequency dressed lattices for ultracold alkali atoms
Ultracold atomic gases in periodic potentials are powerful platforms for exploring quantum physics in regimes dominated by many-body effects as well as for developing applications that benefit from quantum mechanical effects. Further advances face a range of challenges including the realization of potentials with lattice constants smaller than optical wavelengths as well as creating schemes for effective addressing and manipulation of single sites. In this paper we propose a dressed-based scheme for creating periodic potential landscapes for ultracold alkali atoms with the capability of overcoming such difficulties. The dressed approach has the advantage of operating in a low-frequency regime where decoherence and heating effects due to spontaneous emission do not take place. These results highlight the possibilities of atom-chip technology in the future development of quantum simulations and quantum technologies, and provide a realistic scheme for starting such an exploration
Recommended from our members
Tolerability and safety of the intake of bovine milk oligosaccharides extracted from cheese whey in healthy human adults.
Mechanistic research suggests a unique evolutionary relationship between complex milk oligosaccharides and cognate bifidobacteria enriched in breast-fed infants. Bovine milk oligosaccharides (BMO) were recently identified as structurally and functionally similar to human milk oligosaccharides. The present single-blind three-way crossover study is the first to determine the safety and tolerability of BMO consumption by healthy human participants (n 12) and its effects on faecal microbiota and microbial metabolism. Participants consumed each supplement (placebo-control; low- and high-BMO doses) for eleven consecutive days, followed by a 2-week washout period prior to initiating the next supplement arm. Low and high BMO doses were consumed as 25 and 35 % of each individual's daily fibre intake, respectively. Safety and tolerability were measured using standardised questionnaires on gut and stomach discomfort and stool consistency. Faecal extracts were profiled for bacterial populations by next-generation sequencing (NGS) and bifidobacteria presence was confirmed using quantitative PCR. Urine was analysed for changes in microbial metabolism using nuclear magnetic resonance spectroscopy (1H-NMR). Consumption of both the low and high BMO doses was well tolerated and did not change stool consistency from baseline. Multivariate analysis of the NGS results demonstrated no change in faecal microbiota phyla among the placebo-control and BMO supplement groups. In conclusion, BMO supplementation was well tolerated in healthy adults and has the potential to shift faecal microbiota toward beneficial strains as part of a synbiotic treatment with probiotic cultures that selectively metabolise oligosaccharides
Comparison of a SiO2-CaO-ZnO-SrO Glass Polyalkenoate Cement to Commercial Dental Materials: Ion Release, Biocompatibility and Antibacterial Properties
Ion Release and biocompatibility of a CaO-SrO-ZnO-SiO2 (BT 101) based glass polyalkenoate cement (GPC) was compared against commercial GPCs, Fuji IX and Ketac Molar. The radiopacity (R) was similar for each material, 2.0-2.8. Ion release was evaluated on each material over 1, 7, 30 and 90 days. BT 101 release included Ca (23 mg/L), Sr (23 mg/L) Zn (13 mg/L), Si (203 mg/L). Fuji IX release includes Ca (0.7 mg/L), Al (3 mg/L) Si (26 mg/L), Na (60 mg/L) and P (0.5 mg/L) while Ketac Molar release includes Ca (1 mg/L), Al (0.6 mg/L) Si (23 mg/L), Na (76 mg/L) and P (0.7 mg/L). Simulated body fluid trials revealed CaP surface precipitation on BT 101. No evidence of precipitation was found on Fuji IX or Ketac Molar. Cytotoxicity testing found similar cell viability values for each material (~60 %, P = 1.000). Antibacterial testing determined a reduced CFU count with BT 101 (2.5 x 103) when compared to the control bacteria (2.4 x 104), Fuji IX (1.5 x 104) and Ketac Molar (1.2 x 104). © 2013 Springer Science+Business Media New York
- …