12,253 research outputs found
Performance and emission characteristics of swirl-can combustors to near-stoichiometric fuel-air ratio
Emissions and performance characteristics were determined for two full annular swirl-can combustors operated to near stoichiometric fuel-air ratio. Test condition variations were as follows: combustor inlet-air temperatures, 589, 756, 839, and 894 K; reference velocities, 24 to 37 meters per second; inlet pressure, 62 newtons per square centimeter; and fuel-air ratios, 0.015 to 0.065. The combustor average exit temperature and combustor efficiency were calculated from the combustor exhaust gas composition. For fuel-air ratios greater than 0.04, the combustion efficiency decreased with increasing fuel-air ratios in a near-linear manner. Increasing the combustor inlet air temperature tended to offset this decrease. Maximum oxides of nitrogen emission indices occurred at intermediate fuel-air ratios and were dependent on combustor design. Carbon monoxide levels were extremely high and were the primary cause of poor combustion efficiency at the higher fuel-air ratios. Unburned hydrocarbons were low for all test conditions. For high fuel-air ratios SAE smoke numbers greater than 25 were produced, except at the highest inlet-air temperatures
Soft-collinear effective theory and heavy-to-light currents beyond leading power
An important unresolved question in strong interaction physics concerns the
parameterization of power-suppressed long-distance effects to hard processes
that do not admit an operator product expansion (OPE). Recently Bauer et al.\
have developed an effective field theory framework that allows one to formulate
the problem of soft-collinear factorization in terms of fields and operators.
We extend the formulation of soft-collinear effective theory, previously worked
out to leading order, to second order in a power series in the inverse of the
hard scale. We give the effective Lagrangian and the expansion of ``currents''
that produce collinear particles in heavy quark decay. This is the first step
towards a theory of power corrections to hard processes where the OPE cannot be
used. We apply this framework to heavy-to-light meson transition form factors
at large recoil energy.Comment: 46 pages, LaTeX; v2: two references added, eq. (52) correcte
Boundary critical behavior at m-axial Lifshitz points for a boundary plane parallel to the modulation axes
The critical behavior of semi-infinite -dimensional systems with
-component order parameter and short-range interactions is
investigated at an -axial bulk Lifshitz point whose wave-vector instability
is isotropic in an -dimensional subspace of . The associated
modulation axes are presumed to be parallel to the surface, where . An appropriate semi-infinite model representing the
corresponding universality classes of surface critical behavior is introduced.
It is shown that the usual O(n) symmetric boundary term
of the Hamiltonian must be supplemented by one of the form involving a
dimensionless (renormalized) coupling constant . The implied boundary
conditions are given, and the general form of the field-theoretic
renormalization of the model below the upper critical dimension
is clarified. Fixed points describing the ordinary, special,
and extraordinary transitions are identified and shown to be located at a
nontrivial value if . The surface
critical exponents of the ordinary transition are determined to second order in
. Extrapolations of these expansions yield values of these
exponents for in good agreement with recent Monte Carlo results for the
case of a uniaxial () Lifshitz point. The scaling dimension of the surface
energy density is shown to be given exactly by , where
is the anisotropy exponent.Comment: revtex4, 31 pages with eps-files for figures, uses texdraw to
generate some graphs; to appear in PRB; v2: some references and additional
remarks added, labeling in figure 1 and some typos correcte
Charge Density of the Neutron
A model-independent analysis of the infinite-momentum-frame charge density of
partons in the transverse plane is presented for the nucleon. We find that the
neutron parton charge density is negative at the center, so that the square of
the transverse charge radius is positive, in contrast with many expectations.
Additionally, the proton's central u quark charge density is larger than that
of the d quark by about 70 %. The proton (neutron) charge density has a long
range positively (negatively) charged component.Comment: 7 pages, three figures The replacement mainly concerns correcting an
error made in computing the proton up and down quark densities from the
correctly computed proton and neutron charge densities. The proton central u
quark density is now larger than that of the d quar
Inequalities for nucleon generalized parton distributions with helicity flip
Several positivity bounds are derived for generalized parton distributions
(GPDs) with helicity flip.Comment: 20 page
Effect of water injection on nitric oxide emissions of a gas turbine combustor burning natural gas fuel
The effect of direct water injection on the exhaust gas emissions of a turbojet combustor burning natural gas fuel was investigated. The results are compared with the results from similar tests using ASTM Jet-A fuel. Increasing water injection decreased the emissions of oxides of nitrogen (NOX) and increased the emissions of carbon monoxide and unburned hydrocarbons. The greatest percentage decrease in NOX with increasing water injection was at the lowest inlet-air temperature tested. The effect of increasing inlet-air temperature was to decrease the effect of the water injection. The reduction in NOX due to water injection was almost identical to the results obtained with Jet-A fuel. However, the emission indices of unburned hydrocarbons, carbon monoxide, and percentage nitric oxide in NOX were not
On chiral corrections to nucleon GPD
Within the pion-nucleon chiral perturbation theory we derive the leading
chiral correction to the nucleon GPD at . We discuss the difficulties of
consideration of nonlocal light-cone operators within the theory with a heavy
particle and the methods to solve the difficulties. The consideration of the
chiral corrections directly for nonlocal operators allows to resolve the
ambiguity of the inverse Mellin transformation. In particular, we show that the
mixing between axial and vector GPDs are of order , which is two
orders of magnitude less that it follows from the Mellin moments calculation.Comment: 17 pages, 1 figure; minor corrections in the tex
- …